• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

6300 FSB wall?

C

::cRim::

Weaksauce
Joined
Oct 17, 2006
Messages
88
Hey guys

I've been trying to OC my 6300 over the last couple of days and it seems my 6300 hit a wall at about 385 FSB @ 1.4v.

I've tried lowering the multi and giving it more voltage but it won't respond. I also tried setting it at 401 FSB to see if it was a NB issue or strap but it won't post either. I get my fans and hard drive to spin but i have no video.

PCI-e is locked at 100 and PCI at 33.3. NB voltage is at 1.55 and SB is at 1.60. Also my ram can do 1066 so its not the ram thats holding me back.

Could it be the motherboard? Should i flash to a previous bios (im running the latest) ?

The specs for my rig is in my signature. I really want to hit 3.0ghz, anyways thanks for your help guys

cRim
 
Thx but I've tried that. I tried 401 and 402... everything spins up but I have no video.

BTW my core temp reports that CPU is at 34C idle and 45C under load (dual prime running)
MB temps are about 28C idle....

Any advice would help.

Thanks
cRim
 
You must log in or register to reply here.
Back
Top