60 Hz vs 75 Hz

white_dove

Limp Gawd
Joined
Mar 15, 2009
Messages
198
Do you, guys, think that between 60 Hz and 75 Hz ( fps / Vsync on ) is a visible difference ?
Does the human eyes detect this difference ?
Thank you
 
Yes, you can tell the difference but it isn't so much of a difference that you're going to say, "WOW!" Getting your frame rate to match a 120Hz or 144Hz monitor is much more dramatic difference. If you are considering a purchase I would wait for proper GSNYC or Displayport 1.3 monitors to start coming out around summer. They are promising to make the monitor refresh rate "sync" to the display. They are supposed to be dramatically better. GSync will work on Nvidia cards exclusively and Displayport 1.3 will work on all video cards.

If you are just asking if you should play games at 60Hz or 75Hz on a 75Hz monitor of course you choose 75Hz. :)
 
The GSync monitors will be 22 / 24 / 27 / inches, right ?
And, IPS / MVA / TN / panels ?
Thank you
 
I did an "accidental" blind test a few weeks back when i was trying to finish SP campaign of DooM 3 RoE.

See, my gtx480 goes into P3 power state everytime i want to feed my monitor with a 1680*1050 120hz signal, so i've done a small tweak,monitor gets a 100hz signal on desktop and a 120 one when gaming !

While playing doom3 something felt "off", image tearring look more pronounced than usual and the mouse resposnse felt kinda laggy, so I checked my monitor's (samsung 2233RZ ) OSD and saw that the display's refresh rate was "stuck" at 100hz !

opened the developer console, put r_displayrefresh 120 + vid_restart and everything was smooth and responsive again, just the way i remembered it :)
 
Do you, guys, think that between 60 Hz and 75 Hz ( fps / Vsync on ) is a visible difference ?
Does the human eyes detect this difference ?
Thank you
You won't be able to perceive a visual difference, but your eyes will thank you for it with less strain and fatigue. But if you ever go to 144 Hz you will actually be able to see the vblanking when going back to 60 Hz :cool:.
 
You won't be able to perceive a visual difference, but your eyes will thank you for it with less strain and fatigue. But if you ever go to 144 Hz you will actually be able to see the vblanking when going back to 60 Hz :cool:.

What do you mean ? Even if i don't see the difference, is still better 60 Hz or 75 Hz, for the eyes ?
Thank you
 
You won't be able to perceive a visual difference, but your eyes will thank you for it with less strain and fatigue. But if you ever go to 144 Hz you will actually be able to see the vblanking when going back to 60 Hz :cool:.

The refresh rate on LCDs don't affect eye strain as much as it did on CRTs. Eyestrain would be caused by brightness and the lighting around you more than anything. I don't think you would notice a huge difference between 60hz and 75hz
 
You won't be able to perceive a visual difference, but your eyes will thank you for it with less strain and fatigue. But if you ever go to 144 Hz you will actually be able to see the vblanking when going back to 60 Hz :cool:.

I haven't had an issue with eye strain at 60Hz in about 7 years of LCD gaming. My CRT before that, though, would cause headaches at anything less than 85Hz. 96Hz on my current monitor is still pretty nice, though. :D
 
In a blind test, you could probably tell the difference pretty reliably. Does it matter? No. Just leave it at 75 Hz, yeah?
 
I did an "accidental" blind test a few weeks back when i was trying to finish SP campaign of DooM 3 RoE.

See, my gtx480 goes into P3 power state everytime i want to feed my monitor with a 1680*1050 120hz signal, so i've done a small tweak,monitor gets a 100hz signal on desktop and a 120 one when gaming !

While playing doom3 something felt "off", image tearring look more pronounced than usual and the mouse resposnse felt kinda laggy, so I checked my monitor's (samsung 2233RZ ) OSD and saw that the display's refresh rate was "stuck" at 100hz !

opened the developer console, put r_displayrefresh 120 + vid_restart and everything was smooth and responsive again, just the way i remembered it :)

You must be talking about that re-release of Doom 3 because the original is capped at 60.

And yes, r_displayrefresh is the best weapon against windows settings, drivers, and all this bs. id knew their shit :)
 
ignorance is bliss?

In the world of computer monitors and TV's .. yes ignorance is true bliss. Trying to find the latest and greatest and then dealing with it can be a taxing process.

The differences and effort can be worthwhile but in general if I could go back to simple 60Hz game play on my PC I probably would. But I've been spoiled rotten by G-sync and 120hz.
 
You must be talking about that re-release of Doom 3 because the original is capped at 60.

And yes, r_displayrefresh is the best weapon against windows settings, drivers, and all this bs. id knew their shit :)

nope, i don't own the BFG edition

http://steamcommunity.com/id/SoFGR/games?tab=recent

cg_drawfps 1 shows 63fps all the time, you DON'T need more than 60fps to notice the difference between 100hz and 120 in-game :)
 
nope, i don't own the BFG edition

http://steamcommunity.com/id/SoFGR/games?tab=recent

cg_drawfps 1 shows 63fps all the time, you DON'T need more than 60fps to notice the difference between 100hz and 120 in-game :)

That link doesn't tell much. I've never been able to run D3 with more than 62.5 fps. I am not blind, it's never been more than that. QL and this are like night and day. Tell me more about your magic.
 
i played doom3 + roe expansion @ 1680*1050 120hz 63fps from start to finish,

120hz 60fps looks and feels smoother than 100hz 60fps, what's so hard for you guys to understand ?
 
i played doom3 + roe expansion @ 1680*1050 120hz 63fps from start to finish,

120hz 60fps looks and feels smoother than 100hz 60fps, what's so hard for you guys to understand ?


What is "120hz 60fps"??? 120hz displays 120 fps maximum.
 
Make sure the panel you're looking at is "Real" 75hz if you're considering it. As some panels will fake this. I forget how, i think dropped frames?
 
120hz 60fps looks and feels smoother than 100hz 60fps, what's so hard for you guys to understand ?
Are you v'synced? If so, your "60 fps" at 100 Hz isn't 60 fps: it's 50. At 100 Hz, the display refreshes every 10 milliseconds, which means the frame buffers flip at that interval regardless of what's in them. Doom 3 non-BFG can't render faster than 60 Hz (not 63, 62.5 or 61.17 — 60 dead) due to its fixed tick rate and its absence of an interpolating renderer, so you'll only ever see a fresh buffer every 20ms.

If you aren't v'synced, there's no practical difference. The only difference is where tear lines occur.
 
when I had a CRT, i saw no difference between 60hz and 75hz. just put it on it's max and don't use v-sync.
 
On a CRT it's very visible.

Mainly because of the strobing effect of a crt can cause eye strain at just 60hz.

I didn't want to make a new thread can anyone explain why tearing even stutter issues are so prevalent on a 60hz screen vs a 120hz?

I just got a plasma (60hz) and by god the tearing is everywhere on games.

For reference I never really used a 60hz screen for pc gaming before because i went from a 90hz crt to a 120hz lcd.

Seriously have never had a single issue with tearing on my 120hz monitor since i have been using it and most of the time i don't even bother turning vsync on as it is simply not needed.

I know it doesn't have to do with the frame rate because even in 60fps limited game tearing is not visible on my 120hz screen like it is on my plasma.
 
A 120Hz monitor being run at 60 FPS. :confused::confused::confused:

doom 3 cannot run @ higher than 63fps ( or 62.5 for that matter ) without screwing up the physics engine, I've also used the same monitor for playing 40 hours of LA noire @30fps, granted, source engine games running at @ 125fps fixed will feel and look quite a bit smoother but a higher refresh rate is ALWAYS better ! even you don't have the framerate to match it.

Are you v'synced? If so, your "60 fps" at 100 Hz isn't 60 fps: it's 50. At 100 Hz, the display refreshes every 10 milliseconds, which means the frame buffers flip at that interval regardless of what's in them. Doom 3 non-BFG can't render faster than 60 Hz (not 63, 62.5 or 61.17 — 60 dead) due to its fixed tick rate and its absence of an interpolating renderer, so you'll only ever see a fresh buffer every 20ms.

If you aren't v'synced, there's no practical difference. The only difference is where tear lines occur.



I never use vsync, you don't really need vsync when you have such a high refresh rate, there is a difference between 100hz and 120hz because i could instantly tell that something was "off", my mouse did not feel that responsive.

keep in mind that this is a pretty old monitor ( bought it on december 2009 ) with around 13ms of input lag when measured at 1680*1050 120hz, lower resolutions and refreshrates may be much "slower"
 
Mainly because of the strobing effect of a crt can cause eye strain at just 60hz.

I didn't want to make a new thread can anyone explain why tearing even stutter issues are so prevalent on a 60hz screen vs a 120hz?

I just got a plasma (60hz) and by god the tearing is everywhere on games.

For reference I never really used a 60hz screen for pc gaming before because i went from a 90hz crt to a 120hz lcd.

Seriously have never had a single issue with tearing on my 120hz monitor since i have been using it and most of the time i don't even bother turning vsync on as it is simply not needed.

I know it doesn't have to do with the frame rate because even in 60fps limited game tearing is not visible on my 120hz screen like it is on my plasma.

Did you have vsync turned on the 60hz panel? Some 60hz panels run best if you cap the fps at 59fps to remove tearing, at least my TV does.
 
I never use vsync, you don't really need vsync when you have such a high refresh rate, there is a difference between 100hz and 120hz because i could instantly tell that something was "off", my mouse did not feel that responsive.
It's a difference of 1.3ms. You may have noticed a difference due to tear lines being more sporadic at 100 Hz, but the idea that you felt a latency difference — especially dealing only with incomplete frames — is very unlikely. Whatever jitter is present in the engine itself is probably far too severe to make such a small difference noticeable.
 
You could feel the difference between 100 and 120 Hz in an actual 120 FPS game like Quake 3, but with Doom 3? No way. Not unless something is wrong with your setup.
 
Haha, seeing the responses in this thread makes me realize that most of you haven't used a CRT in a long time.

OP, if you're curious, pick up a free CRT off of craigslist and try playing a game at 75 vs 60hz. There is definitely a difference. The 15 frames don't make or break a game, but you will notice that it is much smoother and more lifelike at 75. Likewise, 96 or 120 seem more fluid than 75.

You do get diminishing returns as it increases though. The increase from 75 to 90 isn't as noticeable as the increase from 60 to 75.

Speaking of that, I've never compared a 120hz to a 144hz lightboost monitor, can anyone speak to whether you can really tell a difference once you get that high?
 
I was playing titanfall at 60 hz the first week or so and doing terribly. Then I read it needs a bit of tweaking to get 120 hz going which is wha I normally play at.

My kills at least tripled today. I went from 4 to 5 kills per round to 19-22. It makes a huge difference to me. Like playing basketball in soft mud compared to a hard court. Easier on my eyes too.
 
Last edited:
what monitor do you have ?
how did you increased from 60 to 120 Hz ?
 
when I went from 60hz lcd to 120hz the difference for me was night and day. I just got a 144hz monitor and not that big of a difference but I enjoy having the higher refresh rate.
 
pretty hard to notice the 15hz diff tbh, unlike the huge difference from 60 to 120. used 120hz for the past 4 years and got a laptop to replace my desktop and realized too late that it had no dvi port, needless to say switching back to 60hz was a process, i keep thinking my computer is lagging for the first week.
 
Haha, seeing the responses in this thread makes me realize that most of you haven't used a CRT in a long time.

OP, if you're curious, pick up a free CRT off of craigslist and try playing a game at 75 vs 60hz. There is definitely a difference. The 15 frames don't make or break a game, but you will notice that it is much smoother and more lifelike at 75. Likewise, 96 or 120 seem more fluid than 75.

You do get diminishing returns as it increases though. The increase from 75 to 90 isn't as noticeable as the increase from 60 to 75.

Speaking of that, I've never compared a 120hz to a 144hz lightboost monitor, can anyone speak to whether you can really tell a difference once you get that high?

Back in the days of CRT I was able to tell the difference between 100 and 120 Hz in a few seconds. That said, I am not really sure I will able to see a difference between a 60 FPS game such as Doom 3 running on my BenQ XL2420 if I switch between 60/120 Hz.
 
Back
Top