6 Essential Tips for First-Time PC Builders

They forgot a bit one:

USE A GROUND STRAP

Im sorry, I have been working on PC's since I was 5, I only ever used a ground-strap when I first started up until I was 10, after that I have never used one, so for 20 years now I have NOT used a ground strap and do not see a reason to do so.

As long as you are smart and touch the chassis first, and do not work on the PC on a carpeted floor, and don't leave the PC plugged into power while working on it, you wont develop extra ESD.
 
Make sure you purchase a quality Power Supply.

My rule of thumb has always been the heavier the better, more weight usually better quality Heatsinks.
 
All the "never used a ground strap" posts... So you've never killed a component. So what? Move to a different climate and you just might. Some climates are less prone to static because they're more humid. Try not grounding yourself in a cold winter night in the desert and you'll find out just how serious a problem ESD can be. You don't have to feel the shock to transfer a few hundred volts, either. By the time it zaps you're in the thousands of volts, and damage from ESD doesn't always show up immediately. It more often causes slow component degradation that takes time to ultimately fail. You lose stability, then start getting random errors, then finally it dies. I shoot enough lightning just moving around to know how easy it is to cause a spark in the wrong place. I don't have money to play roulette with my components, so I always ground myself.

Touching the PSU is fine, touching the chassis is fine if the chassis or PSU is grounded. Not grounding yourself at all is the problem. Straps just make it more convenient because you can move around and not have to worry about touching something. The point of the "use a ground strap" statement is that you must discharge static first by grounding yourself, by whatever method, before touching exposed components.
 
Totally disagree with the driver discs..
In MANY cases I have needed it to install the ethernet driver so that windows update can take care of the rest. Same applies to most RAID cards and other specialties. I've also had them resolve new machine BSOD's due to craptacular built in windows drivers.. You can always update them later.

I haven't had any of these issues in a loooong time. Most recent was a vista machine. Just grabbed the NIC drivers from the web and threw them on a USB, then downloaded everything else.
 
All the "never used a ground strap" posts... So you've never killed a component..

People always say this stuff, but the majority have no idea what kind of failure modes ESD damage induces, how it happens, when, or why. Couple that with the fact that the most common latent damage will only cause noticable problems under very specific circumstances (load, voltage, temperature, etc.) and everyone just assumes no event ever happened to them.
 
Wow...the way she plugged the RAM in makes me think she has done this many, many times.

Where in the world do girls like this exist? I've been to a few big LAN parties and can probably count total package girls on my fingers...maybe 2 of them...over a decade of time.
 
Wow...the way she plugged the RAM in makes me think she has done this many, many times.

Where in the world do girls like this exist? I've been to a few big LAN parties and can probably count total package girls on my fingers...maybe 2 of them...over a decade of time.

Asia, apparently.
 
I used to do the same thing. Every now and then touch the case to discharge myself. Until one day I was changing video cards, and while adding the new one I felt the tiniest little zap. I laughed to myself and jokingly said "there goes the video card!" I wasn't laughing for long. I could not lower my morals to return the card because of something stupid that I did.

I've checked complete rookie builder's unstable Win7 build machines, machines that blue screen. These people say ridiculous stuff like the voltage on their ram isn't correct for their processors. After checking all documentation, bios settings, and cpu/mobo manufacturers specs I tell them the voltage is fine. The next question is: did you use a ground strap when you built the system? Nope! A run of memtest86 shows bad ram. The full explanation I give isn't believed, and they insist on repeating the voltage story over and over again. Eventually they RMA the ram, and at my insistence use the ground strap to swap the ram. The system is now stable with no blue screens and no memtest86 errors.

The facepalm moment comes when they again insist the problem was ram voltage. That was also the last time I voluntarily helped anybody with their computer problems.


I think you made this all up.
 
Back
Top