Postal Dude
Limp Gawd
- Joined
- Mar 15, 2005
- Messages
- 428
How do i kno if my PSU has a -5v line? THe ocz ddr booster says it requires on. I have an antec 430W TruePower, can anyone confirm that it has or hasnt got one to see if i can buy this thing?
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
-5v Line
- Thread starter Postal Dude
- Start date
jonnyGURU
Technical Marketing Manager at Corsair Memory
- Joined
- Apr 9, 2005
- Messages
- 4,845
The DDR Booster requires -5V?!?!?
Just look at the ATX connector. If you see a missing wire/pin, it's because there would normally be a -5V lead. Otherwise, you'll have all 20/24 wires.
Also, you can look at the label. If there's no -5V specification on the label, chances are you don't have that rail.
Just look at the ATX connector. If you see a missing wire/pin, it's because there would normally be a -5V lead. Otherwise, you'll have all 20/24 wires.
Also, you can look at the label. If there's no -5V specification on the label, chances are you don't have that rail.