• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

500W Antec Basiq Question

C

ClariorHincHonos

[H]ard|Gawd
Joined
Jun 25, 2007
Messages
1,972
Ok fellas, here is the deal. I have the 500W Antec Basiq, which has a 6 pin PCI-E and 4 pin P4 connector. I need an 8 pin CPU connect, and could easily obtain a connector.

Here's the question-I won't need the PCI-E connector-ever. Can I make an 8 pin connector out of the PCI-E and P4 wiring?
 
Basically I'm looking to build an 8 pin connection, based on the EPS12V spec, using the wires I have available.

12V1 12V1 12V2 12V2
GND GND GND GND
 
You can, but I wouldn't really recommend it. In any case, if you're running a single-CPU computer, you can just use the 4-pin and it should work. The 8-pin is not necessary.
 
You must log in or register to reply here.
Back
Top