4870 - too much for a 480W??

Syncade

Limp Gawd
Joined
May 30, 2002
Messages
495
I know 4870s 'need' 500W. I have a 480W Antec (pretty efficient, good amps per line), and im getting random crashes. I dont crash under 3dmark06, no matter how many loops i run. In CSS and COD4 though, i crash after about 15-30 min. Temps are within range.

Am i crashing because of compatibility issues (read sig for rig) or power issues?

Im 99.9% sure its power issues. Whos got the other 1% knowledge to share? Thanks!
 
Antec is decent but the idle wattage is pretty strong for the 4870. I have a Thermaltake 1000w and it wasnt too expensive.
 
Get a new, larger ps somewhere that you can return it easily (Fry's, BB, etc.), and give it a shot.
 
They cant nab you for something like that?

EDIT: I thought you meant switch the items in the box LOL!
 
I have the other 1%! Together we shall have 100.9%


I guess you are talking about your Trupower 480II. How old is it/how long have you been using it?

Maybe try a new install of Windows (if you haven't already). Is your 3800+ X2 overclocked?

and temps are within range for both the card and cpu?
 
It really depends on the rest of your system specs. If you're running a pretty efficient CPU that isn't overclocked, single HDD and single optical drive, I'd say the power supply is plenty. If on the other hand you're running an OCed quad and multiple drives then it may be pushing it. Antec PSU's also vary in a big way in terms of quality, the older TP and TPII series had a very high failure rate.

Edit: Just noticed your sig. The rest of your system looks to have pretty modest power requirments. You are however running a Antec TP PSU. My guess is that your problem is either temp or PSU related. I'm also curious as to the resolution you're running? Beucase in most cases, an X2 3800+ will perform the same with a 9600GT as it would on a 4870.
 
Yeah my temps are all within range. I know the card is being held back by the rest of my system, but I couldnt pass up the deal I found it for. I dont get any artifacts in games, the system just freezes, plays a sound loop, then the video signal cuts out.

Its my own fault for running such old equipment lol!
 
grab a corsair tx series from a place like buy.com they always have great deals on them especially after MIR
and they're damn solid PSUs
 
I got a antec trueblue (truepower) 2.0 480w (18a per line, 33a total) running a 9800GTX+. When I use a multimeter to test my voltages coming from the psu, its all within spec, but the only problem that would indicate that there isn't enough juice is everytime I reset my computer (and this could just be a mobo problem), my CPU voltage and sometimes my mem voltage can be way out of spec, or be right where I set them. I have booted my CPU and have gotten a reading of 1.55v cpu (mine is set at around 1.41) and memory voltage of 3.22v (2.8v). But that doesn't always happen, and once my computer is booted, that is the voltage it works at, it doesn't fluctuate.

I got to get a new psu soon, I need something better than a 9800GTX :(, damn you bastards!
 
I know 4870s 'need' 500W. I have a 480W Antec (pretty efficient, good amps per line), and im getting random crashes. I dont crash under 3dmark06, no matter how many loops i run. In CSS and COD4 though, i crash after about 15-30 min. Temps are within range.

Am i crashing because of compatibility issues (read sig for rig) or power issues?

Im 99.9% sure its power issues. Whos got the other 1% knowledge to share? Thanks!

that doesn't sound like a PSU problem to me. Sounds more like a driver issue. and 480 watts on a good PSU should be fine for a 4870.
 
I tend to agree that it more likely driver issues than PSU. I have a very similar setup (a64, nf4, 4870) on a 425w Enermax PSU with no issues.
Do you get a VPU recover message?
 
Where did the "needs 500W" for a 4870 come from. The min spec is 450W for a single card, 550W for Crossfire. I'll let you know in a couple days whether my 4870 has problems with my Antec Earthwatts 500.
 
I could have sworn the min for a 4870 was 500 and 550-600 for the 4870x2. That said, I'm running a BFG 550W PSU and i've hard zero issues.
 
Yeah im still crashing everytime i game. I have the latest drivers though? Anyone else crashing their 4870?
 
How old is the power supply? As PSUs age, they deliver less power (at least from memory, I remember eading that agggges ago).
 
I have the other 1%! Together we shall have 100.9%

this made me lol.

OP- check [H]'s 4870 review, i'm pretty sure they have a power consumption section in that review. make some guestimates about the power draw of the other components in your system and add up your numbers. that'll give you an idea as to whether or not you can use your current PSU (aside from looking at amperage requirements).
 
I have once tried my HD4870 X2 playing Call of Juarez @ 1280x1024 for about 10 minutes using an Enermax FMA II 465W. It works but there was a squeling sound coming from the GPU. The CPU then was C2D OCed to 3.2GHz, not the C2Q in the sig.
 
Get a Corsair. Even my 450 watt can run a 280GTX.

Corsair is a Seasonic psu but better b/c it is NOT seasonic which makes great power supplies but has the worst or close to the worst customer service of all time. They still owe me an S12 bastards.
 
Well i just discovered that if i let the computer sit long enough after it crashed, it will start up the 4870 again and then give me the CPU Recover error.

Looks like i need a bigger PSU :(
 
It works but there was a squeling sound coming from the GPU.

Are you sure it was the GPU and not the PSU making that sound? I had an Antec 550W which squealed when my 4870 was under load, replaced the PSU with a Corsair 620HX and all was silent.
 
Are you sure it was the GPU and not the PSU making that sound? I had an Antec 550W which squealed when my 4870 was under load, replaced the PSU with a Corsair 620HX and all was silent.

Yes it was the GPU but with my TX750 it doesn't scream any more :D
 
Using Kill-A-Watt,
it tells me I'm using ~300W on gaming sessions, ~200W idle.

Antec NeoHE 550 : Q6600@3.0, 4870, 2 HDs, 1 ODD.
 
Well i just discovered that if i let the computer sit long enough after it crashed, it will start up the 4870 again and then give me the CPU Recover error.

Looks like i need a bigger PSU :(

Or a better one. I have had nothing but terrible luck with antec powersupplys. I even had one that made just the right frequency to set off my wireless door bell. Turn on computer, door bell rang. Awesome right?

I tend to lean towards Thermaltake but I recently got a Corsair HX520 and I am in love with it for sure.
 
Antec Trupower 480 ll AMD Athlon 64 3800+ X2 ll eVGA nForce4 ll 2GB Kingston Hyper-X ll Visiontek RADEON HD 4870 ll WD 320GB S-ATA2 ll Hannspree HF229H

Using the PSU calculator, even with 100% of TDP, 100% load and 10% capacitor aging, that only comes out at about 395W.

However, the old Truepower 1.0 only appears to have one 12V rail at 22A, with a 5V rail at 38A. That's just 264W on the 12V rail, which might not be enough for the CPU, 4870 and other components. For comparison, my 450W PSU has got 396W max output on the 12V rail.

Old PSU's prioritized the 5V rail over the 12V one. The TruePower 2.0 seems to have two 12V rails at 18A each. So if you have that one, it should work fine provided you distribute the load evenly between the two rails.
 
Or a better one. I have had nothing but terrible luck with antec powersupplys. I even had one that made just the right frequency to set off my wireless door bell. Turn on computer, door bell rang. Awesome right?

I tend to lean towards Thermaltake but I recently got a Corsair HX520 and I am in love with it for sure.

haha that's funny shit. i've had good luck with the two antec PSU's i've owned. currently using a truepower trio 650w and it's been flawless.
 
Back
Top