4870 Ocing, GPU-Z and CCC

fantomau

2[H]4U
Joined
Aug 25, 2007
Messages
3,367
I just got a 4870 a few days ago and I have the fan set to 35%, Which drastically reduces the temps.

But I cant understand why GPU-Z shows this:



Texture fillrate, GPU clock and pixel fillrate seem messed up.

And I set my OC, Do the test, Accept and done, But at the bottom under current clock settings, Memory clock is fine, But the GPU clock keeps going back and forth between 500MHz and my OC.

I've also seen some peoples bandwidth alot higher than 101GB/s I see in GPU-z, Like over 130GB/s.
 
Looks like you got yourself a badass little card there ;) j/k, I don't know why those numbers are ridiculously high. Are you sure you have the latest version of GPU-Z?

As for why the GPU clock keeps going back and forth from 500Mhz to your OC'd setting, that's the GPU throttling down because it's not in use. That's normal. I'm not sure if you can change that setting with CCC, but there's no reason to, really, unless you just like seeing big numbers in hardware monitoring programs. The GPU will set to your OC'd setting (or the default 750Mhz if there's no OC) whenever the GPU Activity changes to > 0%.
 
No, I was just curious as to why it was going from 500 to my oc. As long as its normal, I'm ok with it. I'm just wondering about those #'s in GPU-Z and ya, Thats the latest I've seen.


Also, Everytime I try to run ATItools, It hard locks my system and I have to power down with the switch.

Also when I load rivatuner up and goto the monitor driver wizard, It says the maximum resolution reported by the driver doesnt match with EDID and says max res is 1280x1024:

EDID Info: DELL E228WFP - Max res 1280x1024
Driver Info: Dell E228WFP - Max res 1680x1050

Dunno what those mean though.

Edit: According to the gpu-z forums, Alot of people are seeing the same #s as I am with the latest gpu-z, Or it could be the 8.9 drivers.
 
Back
Top