450Mb/s on the "cheap"

istymie

n00b
Joined
Jul 21, 2004
Messages
57
I've been trying a few different RAID vs. SSD solutions to find a sweet spot. Best one I've found so far is:

4 of these
http://www.newegg.com/Product/Product.aspx?Item=N82E16820609332
1 of these
http://www.newegg.com/Product/Product.aspx?Item=N82E16816115048&Tpk=highpoint 3510

Gets you this (on a P6T):
hdtach.png


Not bad for a little more than the price of one 32Gb Intel X25-E SSD.

Write performance is kind of *meh* though due to MLC.
 
4 hard drives would have produced the same result. Would have cost a bit less and you would have had considerably more space. Only thing you get is a much lower access time.
 
4x1TB drives (Samsung Spinpoint F1 HD103UJ) will give you 460MB/s sustained read and write max dropping to about 1/2 that min.
Avg is 368MB/s.
It depends if you want that extra speed and dont need 4TB :D

I read somewhere today about the new 1.5TB Seagate drives which have 2 platters (read: higher data density) with a read transfer rate of 160MB/s.
Dont know about the write performance and there have been more than the expected number of failed Seagate 1.5TB drives recently so maybe not the best option for RAID 0.
 
4x1TB drives (Samsung Spinpoint F1 HD103UJ) will give you 460MB/s sustained read and write max dropping to about 1/2 that min.
Avg is 368MB/s.
It depends if you want that extra speed and dont need 4TB :D

I read somewhere today about the new 1.5TB Seagate drives which have 2 platters (read: higher data density) with a read transfer rate of 160MB/s.
Dont know about the write performance and there have been more than the expected number of failed Seagate 1.5TB drives recently so maybe not the best option for RAID 0.
You're thinking 3 platters. The new 7200.12 drives are 500gb per platter.
 
The new 500GB/platter seagates really look good. RAID setups using these $60 disks get really fast for little cost and get more storage than most people can use. You get redundancy and capacity. No brainer imho.
 
Back
Top