4-Pin Power on 7900gs

DeadlyAura

CoalWagen
2FA
Joined
Jun 6, 2005
Messages
5,083
So I have a 7900gs, solid card for what I need it for, runs most games at close to maximum settings.

Yesterday I took apart my PC, reseated my Big Typhoon, cleaned off the heatsinks and fans, etc. Put the whole PC back together and booted up. Temps were down, PC was running great.

Primed for an hour to set the AS5, then booted up Team Fortress 2. I played TF2 for about 2 hours, maximum settings, 1280x1024, FPS was high enough where I didn't notice anything wrong.

I stopped playing, left the PC, and got on the laptop to do some work. I look up, and my PC is BSOD'd. Fuck.

So I reboot, it starts up fine, but I get an nVidia error message that says that my video card is not receiving enough power. I crack open the case and realize that I never plugged the power back into the card. And I know it didn't fall out because, it was resting OVER the card.

I'm basically just trying to figure out how the hell I managed to run the game so flawlessly with no power to the card except motherboard power. And how much power does the card actually draw from the 4-pin power versus the motherboard?
 
The connector is actually 6-pin, and is refereed to as the PCIe aux power connector.

The amount of power that the PCIe slot can supply solo is 75 watts, and the 6-pin PCIe power connector can supply an additional 75w.

The 7900GS graphics card uses less than 50w peak, so the connector is largely useless, unless you are planning on overclocking. If you are absolutely certain the power connector didn't fall out, then the only other explanation is that the background check the driver performs to check for connections didn't happen until after your game was over.
.
 
The 7900GS graphics card uses less than 50w peak, so the connector is largely useless, unless you are planning on overclocking.

Not entirely, my 7900gs would not play some games at all without the power cable plugged in. The screen would just completely go messed up until i restart. I don't think i was overclocking at the time.
 
The connector is actually 6-pin, and is refereed to as the PCIe aux power connector.

The amount of power that the PCIe slot can supply solo is 75 watts, and the 6-pin PCIe power connector can supply an additional 75w.

The 7900GS graphics card uses less than 50w peak, so the connector is largely useless, unless you are planning on overclocking. If you are absolutely certain the power connector didn't fall out, then the only other explanation is that the background check the driver performs to check for connections didn't happen until after your game was over.
.

Yeah, it's definitely 6-pin, I'm not really sure why I kept saying 4-pin.

But anyways, good to know, I wasn't really sure how it ran with barely any power.

Another question though. The PCIe slot can deliver 75 watts on its own, however, when the 6-pin aux power is connected, does it reduce the strain and power delivered by the motherboard? Or does the motherboard always supply a constant 75 watts?
 
i suppose it would reduce strain in a way as it will probably be running of a different rail. the connector must be there for a reason
 
Back
Top