3Dmark03

N

Nismo

[H]ard|Gawd
Joined
Mar 10, 2000
Messages
1,413
I was running 3Dmark03 last night. I do have my memory @ 1:1, proccesor from 2.53GHz to 3GHz and Video Card OCed.

3Dmark03 got to the last few tests and it just kicked me back to windows. No lock up or restart, just kicked me back to windows that operated fine after that.

What overclocked piece of hardware may be doing this? You would thing the CPU and VC would just totally freeze everything, right?
 
in my experience its probably your processor, thats what happened to my amd when not enough voltage was applied.
 
the only thing that has ever kicked me out of 01 or 03 has been to high of an o/c on my vid card. i lowered it a few mhz then no probs.
 
try reinstalling 3dmark, a bad install, also try doing the tests individually and see if that changes it
 
Yeah, you might be right. It ran through it fine with both 3GHz and 1:1 mem. Only when I upped the FX5900 from 500/850 to 500/900 did it kick me out.

What does the AGP voltage do in the bios? Do you guys touch that? I think stock is 1.55 volts and you can go up to 1.6? What is that used for?
 
You must log in or register to reply here.
Back
Top