300 gig shows 127

Michael.R

Gawd
Joined
Jan 20, 2005
Messages
886
Here are my system specs if it helps

-Athlon 64 3500
-1 gig ocz rev 2 at 2-2-2-5
-520 watt vantec powerseupply
-2 optical drives
-BFG 6800 ultra oc.
-2 western digital raptors (74 gigs)
-1 Maxtor Diamond Max 3 (300 gigs)
-Audigy ZS
-MSI K8N Neo 2 platinum nforce 3

I would just like to point out that at the moment I am using one of the raptors as a sotrage drive untill I get the Diamond Max3 working properly. (that raptors are not in Raid 0) The raptor without the operating system has a 4gb partition for the swap file and the rest is storage. The raptors are on sata 3 and 4 (because People had problems with them on 1 and 2 with raid 0 when overclocking) The diamond max is on sata 1.

Anyways on to my problem. I just bought the Diamond Max 3 hard drive today. Upon booting up the machine And inserting the windws xp installation disk so I could partition the hard drive 3 times I noticed it only had 127 gigs of storage on it. I then went to the website to check that I had infact bought the correct drive. Everything matched up. I thent went and formatted and installed windows xp pro but still only 127 gigs.

Does anyone know what the problem is?

I am going to try updating my bios and see if that fixes it.

I have heard something about wrong firmwares or something along those lines with hard drives. Is there a way to check firmware versions?
 
k1pp3r said:
move to sp2 and to ntfs to see the whole drive
Not quite. Windows XP cannot format a FAT32 volume larger than 32GB.

And SP1 or later is required to recognize the entire 300GB (actually, 277GB) drive.

Michael.R,
Are you using any Service Packs at all whatsoever on your Windows XP installation? If not, then you must get Service Pack 1 or later (the current Service Pack is SP2). And you don't need to install SP1 first before installing SP2, since SP2 includes SP1 and SP1a fixes. Be sure to install the Service Pack first, then proceed to partition and format that 277GB drive.

Oh, by the way, were you trying to install your 277GB drive as your system drive? If that's the case, there is a good chance that your installation disk for Windows XP has no Service Pack at all whatsoever. You will need a copy of Windows XP which has SP1 or later already slipstreamed onto your installation CD-ROM. BIOS upgrades cannot get around your 127GB barrer, in this case, since every one of the Athlon64 systems already support large hard drives natively with their original BIOSes.
 
Ya my windows xp installation cd does not have service pack one or two on it. I rember reading something in maximum pc that explains how to make a service pack two install disk for windwos xp.

My current drives (the raptors) alreay have windows xp with service pack 2 installed but they still recongnized it as 127 gigs.

I will see if I can find the article and make a service pack two installation cd.

But this is what I am trying to do with the drives.

Sata ports 3/4
-will have the raptors in raid 0 as the boot drive
Sata port 1
-will have the maxtor and will be a storage drive.
 
E4g1e said:
Not quite. Windows XP cannot format a FAT32 volume larger than 32GB.

And SP1 or later is required to recognize the entire 300GB (actually, 277GB) drive.

dude, i said ntfs not fat32, and with windows xp sp1 fat32 can see up to 127 GB;s

Ntfs will see larger with >sp1, i suggested sp2 because it is out.
 
well i didnt have time to do it last night so im doing it this morning. Hope it works.

I did check partition magic and it shows the drive as 288 gigs which is correct because 1024mb is a gig and not 1000 but for some reason it is only showing a 8 mb cache when it should be 16. I will post some screenshots later if this doesnt fix it.
 
If you want to do a quick test, you can set the 'EnableBigLBA' bit in the registry like described here. You should still do install the service pack for real use though.
 
ok so the computer is regonizing the whole hard drive now. But im still skeptical as to whether I have 16 mb/s of cache or 8. Is there a way to check? I will run some benchmarks with sis and compare them to what other people got. The product numbers seem to match up though.
 
k1pp3r said:
dude, i said ntfs not fat32, and with windows xp sp1 fat32 can see up to 127 GB;s

Ntfs will see larger with >sp1, i suggested sp2 because it is out.
Actually, even the plain XP (no SP) can use FAT32 volumes up to 127GB - pre-formatted under Windows 98 or Me, of course. Formatting such a volume is a different story, however: Even with SP2, XP cannot format a FAT32 volume larger than 32GB.
 
E4g1e said:
Actually, even the plain XP (no SP) can use FAT32 volumes up to 127GB - pre-formatted under Windows 98 or Me, of course. Formatting such a volume is a different story, however: Even with SP2, XP cannot format a FAT32 volume larger than 32GB.

i never said anything about formatting, i simply said "see" which is why i said use ntfs as Fat32 can "only" see up to 127GB's
 
Back
Top