• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

3+ ram volt mobo's?

S

snefan

Limp Gawd
Joined
Oct 14, 2005
Messages
303
on which socket 939 motherboards can you set the memory volt over 3 volts?
i'd rather not have dfi as i would like to skip the pickyness :cool:

cheers
 
I can go up to 3.2v on my EPoX 9NPA+ Ultra :)

Nick
 
thx, but i forgot to say im not looking for sli/crossfire :p

found the epox for a pretty good prize so i guess ill go with that unless someone lets me know :)


just came up with another question, can the epox mobo run dual channel if i use 4x 512mb ram sticks?
 
yep epox 9npa+ ultra and 9npa+ sli both go to 3.2volts, the dfi lanparty boards also go over 3 and so does the abit an8 sli
 
wesleys_dad said:
abit an8 32x has 3.3v and is one nice board
Click to expand...
AN8 32X only has 3.2V.
AN8 V2.0, AN8-V, AN8 Ultra, AN8 SLI have upto 3.55V depending upon BIOS (early are 3.55V later is 3.4V).
 
i say again im not gonna use SLI as its just a waste of money IMO :cool:


anyways... does anyone know how to get over 2.7 volts to the ram on a asus a7n8x-e deluxe???

would need it badly incase i cant get a new mobo/cpu and gpu :(
 
I would strongly suggest a DFI board. If you set things to auto, you can play with just your ram timings and go from there. The Ultra-D i have is really not very picky at all. I used to have a DFI Infinity NF2 and it was a bit of a nightmare, the Ultra-D, though, is more or less a dream to work with.
 
You must log in or register to reply here.
Back
Top