3 questions about my oc... first timer.

[techpriest]

Hey guys, got 3 questions, sorry for the noobness:

1. Can someone tell me which is the correct fsb strap setting for 1:1?
On auto the dram freq option is ddr2-801. On 400mhz fsbstrap it is ddr2-800.

2. I want to stay at 3.6ghz 1:1fsb/dram, what should I do next? Lower performance level and run memtest and/or prime?

3. Pci-e freq: 101 or 100? Not really sure anymore.

system:
Asus P5Q Pro / E8400 @ 3600MHz
2x2 GB G.skill DDR2-800 5-5-5-15
Evga 8800GTS 512mb / x-fi xtreme gamer
WD 640GB
Antec Neohe 500w
Vista business x64


current settings: [24hrs prime blend stable/12hrsmemtest stable]

JumperFree Configuration Settings

AI Overclock tuner: MANUAL
CPU Ratio Setting: AUTO
FSB Strap to North Bridge: AUTO
FSB Frequency: 400
PCI-E Frequency: 101
DRAM Frequency: DDR2-801
DRAM Timing Control: MANUAL

1st Information :

CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 15
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time: AUTO
Write Recovery Time: AUTO
Read to Precharge Time: AUTO

DRAM Static Read Control: AUTO
DRAM Read Training: AUTO
MEM. OC Charger: DISABLED
AI Clock Twister: AUTO
AI Transaction Booster: AUTO
Performance Level: 13

CPU Voltage: 1.25625v (CPU-Z readings - idle: 1.232V - load: 1.240V)
CPU GTL Voltage Reference: AUTO
CPU PLL Voltage: AUTO
FSB Termination Voltage: AUTO
DRAM Voltage: AUTO (gskill 2x2gb ram rated at 1.8-1.9)
NB Voltage: AUTO
SBridge Voltage: AUTO
PCIE SATA Voltage: AUTO
Load Line Calibration: AUTO
CPU Spread Spectrum: DISABLED
PCIE Spread Spectrum: DISABLED
CPU Clock Skew : AUTO
NB Clock Skew : AUTO

Advance CPU Settings
CPU Ratio Setting: AUTO
C1E Suppport: ENABLED
Max CPUID Value Limit: DISABLED
Intel® Virtualization Tech: DISABLED
CPU TM Function: ENABLED
Execute Disable Bit: ENABLED
Intel SpeedStep Technology: DISABLED

 

[Seb1]

Hmm,
1. test the memory bandwidth for each setting and choose the better.
2. If you stay at 3.6GHz 1:1 and you choose a lower performance level, then test with memtest, but I'm unsure about this, because the performance level sets the MCH internal latencies, so...
3. The default PCIe frequency is 100 MHz, raise it a little usually for troubleshooting/stability purposes.
Here is some very interesting reading for you.