3.0 Northwood@3.3

You should be able to do 3.4 on stock voltage and air easily with the D1 stepping P4.
 
do you know the stock voltage because i dont :( and do you know what i need to change and what to change it to so that it all works right and stable>??????
 
bginamercedes said:
do you know the stock voltage because i dont :( and do you know what i need to change and what to change it to so that it all works right and stable>??????

Stock voltage is 1.55V. I had mine running @ 230FSB @1.575V on the stock Intel cooler.
Let me know what mobo you have and find out what kind of memory you are running and I will try to help you out.
I didnt have the D1 rev. P4 like you which is a very good overclocker so you might get more out of yours.
 
i have a asus p4p800E-deluxe mobo and my fsb is at 2200
and if you save the pic at the top you can zoom in and see at the stats sorry it came out to small and if you need any thing else tell me thanks alot :)
 
Drop the voltage back to stock and see if it's unstable. Bench it, Prime95 it (yeah..i just verbed that), and game on it. Or are you already sure it's unstable without the voltage being that high?

Also...note....don't make pictures like that as thumbnails -_- =/
 
My lappy screen kind of sux so its not very visible, but I did see that you are running your memory @ 5:4 ratio so I suggest you just bump your fsb to 227 and see how it works for you. I ran my ram 1:1 because i had Pc4000.
 
when the voltage gose done it is a little unstable but i have not tested that much so ill test it and ill get back to you tomerow thanks alot :D
 
You won't hurt your CPU at 1.6v, its not as high as you think. Mine sits at its overclock without a fuss. Rule of thumb is stay under 1.65 if you wanna be safe, under 1.7 if your smart, but going over 1.7 will kill it over time (they randomly die over 1.7v). Your on the same mobo as me, you can just leave it on auto-voltage and itll keep it within safe limits. Personally i just stick it on 1.6 and enjoy.

treblking omfg, your cpu die? that much voltage is a tad stupid a for a northwood lol.
 
D4hPr0 said:
Stock voltage is 1.55V. I had mine running @ 230FSB @1.575V on the stock Intel cooler.
Let me know what mobo you have and find out what kind of memory you are running and I will try to help you out.
I didnt have the D1 rev. P4 like you which is a very good overclocker so you might get more out of yours.

On my bios when i set the voltage to auto it always shows it as 1.6V on cpu-z. so i should just keep that the same at pull up the fsb to like 227. i did this but my ram ratio gose to 3:4 or 5:4 and i dont know what to do??? :confused:
 
Back
Top