2500k OC

B

Benihana

Limp Gawd
Joined
Sep 5, 2006
Messages
214
I have a 2500k Industrial Sample that i purchased a while ago for a c-note and i have been running it at 4ghz ever since the beginning on auto voltage....but I have tried to go to 4.5 and everything seems stable but it fails prime blend test, is there a certain setting i have to change? Thanks.

Asrock Z77 Pro4-m
Corsair H50 Cooler
12gb Ram
 
What are your ambient temps, idle temps, 4GHz temps and 4.5 GHz temps?
 
Well i never tested the temps under 4.5ghz just because it would fail prime blend pretty darn fast....but running a prime95 small fft test as we speak and under auto voltage @4.0ghz and it never goes higher than 77c at the lowest fan speed setting using a push-pull fan config Corsair 50, very very quiet. I can go higher with the fan as even at higher speeds its still relatively quiet. The voltage is currently showing an average of 1.272v. I'm checking temps with HWMonitor.
 
That's a good start. With the few that we have here in my house, it seems like the temps are pretty stable up to a point, like 4.2 on my current i7. After that, I have to start turning up the voltage and it gets hot quick. I generally run mine at 4.5 all of the time, even though I have had it running at 4.8. I don't like the temps/volts at 4.8. Now my son's rig, same i7, runs completely cool at 4.5, so he generally runs his at 4.8 with no issues and nice and cool. And honestly, I don't see the difference in speed from 4.5 to 4.8 except in some benchmarks.
If you want to push and test temps, I would find the breaking spot, like is it 4.3 or 4.4, then turn up the volts ever so slightly, and try the next step up.
 
You must log in or register to reply here.
Back
Top