• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

2405fpw base measurements needed please

S

Sparrow_69

Gawd
Joined
Jan 20, 2004
Messages
776
Would someone be kind enough to give me the measurements of the base of the 2405. I checked the user's manual online, but it only states that the lcd is 9" deep, which I'm assuming is the depth of the base. Could someone tell me how wide it is?(base) Thanks
 
Approximately 10-12" wide (base only, this is just an educated guess on my part)). If no one else responds, I'll give you an exact measurement on Thursday evening. I'm out of town right now, and will be home then to measure.
 
I don't own a 2405FPW (I wish I did, though), but some rough calculations show that the measurements should be about ±20.5" x ±12.5".
 
If you are refering to ONLY the base it is roughly 12.5" wide and 8.5" deep (with a little padding on those numbers. The screen itself is 22"wide. Good luck
 
Lothar98 said:
If you are refering to ONLY the base it is roughly 12.5" wide and 8.5" deep (with a little padding on those numbers. The screen itself is 22"wide. Good luck
Click to expand...
That's exactly right. Remember that the base has the shape of half a circle and that the circular part sticks out about an inch or so from the panel. :)
 
Excellent, thanks guys, I appreciate it. I have a 2405 on the way (can't friggin' wait) and wanted to know beforehand if it would fit underneath the hutch on my computer desk. Tks again :)
 
You must log in or register to reply here.
Back
Top