$20 Quad Core Orange Pi PC 2

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
It looks like the Raspberry Pi might have some competition. This single-board quad core 64-bit computer is capable of running Ubuntu, Android 4.4, Rasberry Pi Image and more. The best part, it only costs $20.
 
We all know this is the attempt to take over the US from the inside by the Chinese. Everyone buys these , the embedded chips then in the middle of the night take over your internet of things household , and WHAM. Your toaster assassinates you in the morning.
 
That's a really odd arrangement of the CPU and RAM. Looks like they just dropped them on the board and soldered them where they fell.
 
And more RAM and the ability to run windows !!

Its $20, what do you expect?

They also have others with built in WiFi and 2GB RAM if you really need it however.
 
No idea why this seems so interesting. Odriod-C2 has better specs (same CPU, twice as much RAM, GigE, and support for eMMC), costs the same/less, and has been shipping in quantities since April.
 
A lot of these off brand models don't have a supported linux kernel that supports hardware acceleration so be careful
 
A lot of these off brand models don't have a supported linux kernel that supports hardware acceleration so be careful

That would be a concern of mine.
 
Reall, I just want a Raspberry Pi with beefier graphics for emulation.
 
Does the Ethernet jack connect thru USB like the Raspberry Pi? If so then being Gigabit is entirely pointless as this box does not appear to have USB 3.0.
 
Does the Ethernet jack connect thru USB like the Raspberry Pi? If so then being Gigabit is entirely pointless as this box does not appear to have USB 3.0.

According to schematics it appears the ethernet is connected straight to the SoC. SATA, if there is one connects through a usb hub though.
http://linux-sunxi.org/images/c/cb/ORANGE_PI-PC2-V1_2_schematic.pdf

I found the schematics and some technical discussion here:
http://www.cnx-software.com/2016/11...on-allwinner-h5-soc-launched-for-20/#comments
 
Reall, I just want a Raspberry Pi with beefier graphics for emulation.

Emulate what? It does up to PS1 fairly well (and I hear N64 well, too). Any higher and you're doing Dolphin and stuff. If that happens, I'm replacing my arcade cab PC with a RPi (or clone). I probably don't even need the power I currently have... I only use it for MAME and up to Saturn (no analog sticks).
 
No idea why this seems so interesting. Odriod-C2 has better specs (same CPU, twice as much RAM, GigE, and support for eMMC), costs the same/less, and has been shipping in quantities since April.
I agree, the Odroid-C2 would be a much better buy.
The A53 isn't even as fast as the old A9, clock-for-clock, so while this is good for the price, if you guys need more CPU processing capabilities, finding a SBC with an A15 or A57 would be more worth the time and trouble. (Odroid has this)
 
Emulate what? It does up to PS1 fairly well (and I hear N64 well, too). Any higher and you're doing Dolphin and stuff. If that happens, I'm replacing my arcade cab PC with a RPi (or clone). I probably don't even need the power I currently have... I only use it for MAME and up to Saturn (no analog sticks).

The N64 emulation is hit-and-miss, and that is really the cutoff point, as you said. Once it can do N64 100% (or at least 95%) then it will be the ultimate emulation board.
 
There is tons of competition for the Raspberry Pi. The Orange Pi is old news. You can get a cheap board like this with basically any configuration you need for $50-$100. the Raspberry is completely obsolete.
 
We all know this is the attempt to take over the US from the inside by the Chinese. Everyone buys these , the embedded chips then in the middle of the night take over your internet of things household , and WHAM. Your toaster assassinates you in the morning.

It's not the Chinese. It's Skynet.
 
Dahkoht - hush now Michael Bay.. you are just having another Transformers nightmare. It'll be okay.

d76e9e3096464927142b6102e82073fe.jpg
 
So an Allwinner SOC for a device that will run Linux - This is the same company that has a history of terrible support in Linux and has a laundry list of GPL violations...
 
Trace length optimization. Makes for cheaper manufacturing.

Oh, I know WHY they did it, I did a few PCB designs back in college. Longer traces don't actually cost ANYTHING to manufacture. You have to start with a whole board of copper, then use acid-etching to eat away the excess leaving only the traces. So for a given layer, the cost is the same regardless of the length or layout of the traces. Looking at it the picture closely, I think this may have been done not specifically for trace length. Given the number of traces and the density of the components and ports, I'm guessing they saved a layer of PCB by this arrangement.

It always just looks really weird to me to have multiple asymmetric parts, especially when they're the largest parts on the board.
 
Back
Top