2 SSDs/New motherboard?

roaf85

2[H]4U
Joined
Jan 8, 2005
Messages
2,766
So I have a dilemma. I for sure want to switch to SSD and I am looking to hover around 300-400 gb of space for my needs. Even after thinking about moving the non essential data off the drive.

I want one volume so it is easier, hence where raid comes in. I don't foresee there being a sale on a 400 gb SSD so it looks like Black Friday will be 180 gb or 256 gb hard drives.

My current mainboard (p5p43td) does not have raid. I imagine Intel Matrix software raid would suck? So would I put up a new mainboard and just upgrade or get a controller card? I understand most built in controllers suck, but I would be only running Raid 0. Most controller cards I am seeing for SATA 6gbs are around 100.

What would be my best option here? Thanks.
 
haha, I just posted a kind of similar question based on my ssd use, which looks pretty close to what you're thinking through.

What I've done.. I've got 5 ssds in raid 0 split as 2 + 3. C: is 512gb (2*256), D: is 360GB (3*120). I'm using standard onboard intel raid (x79, rste rather than rst tho). This arrangement has been working fine for me.

[on board raid really doesn't suck unless you start needing parity calculated - raid 5+, etc. for traditional desktop uses of raid (0,1) it's fine]

[[Someone else would know better than me I'm sure. I had ich10 on my old Gigabyte EP45-UD3P which did let me raid. Is there a bios change? (sata ports, ahci -> raid, etc)]]
 
Last edited:
Intel Matrix is not really software RAID, you need a RAID southbridge to get it (so, ICH10R instead of your ICH10).

You can probably find a mobo with ICH10R for real cheap so I would do that.
 
haha, I just posted a kind of similar question based on my ssd use, which looks pretty close to what you're thinking through.

What I've done.. I've got 5 ssds in raid 0 split as 2 + 3. C: is 512gb (2*256), D: is 360GB (3*120). I'm using standard onboard intel raid (x79, rste rather than rst tho). This arrangement has been working fine for me.

[on board raid really doesn't suck unless you start needing parity calculated - raid 5+, etc. for traditional desktop uses of raid (0,1) it's fine]

[[Someone else would know better than me I'm sure. I had ich10 on my old Gigabyte EP45-UD3P which did let me raid. Is there a bios change? (sata ports, ahci -> raid, etc)]]

5 SSD's in 2 Matrix R0's. I hope you have a good backup :)
 
Intel Matrix is not really software RAID, you need a RAID southbridge to get it (so, ICH10R instead of your ICH10).

You can probably find a mobo with ICH10R for real cheap so I would do that.

Ok I was wondering that. That answers that question of needing a new mainboard. To be honest I have to power to upgrade and I am getting the processors free so the mainboard cost is a moot point.
 
Back
Top