18" cable needed

[HardyOne]

Anybody know if this is available, and if so, where I can get some:

18" 4 pin molex to SATA power cord - with ONLY the Molex at one end and the SATA at the other. (it can be a bit longer, but not shorter)

I have found some but they have a second SATA connector, which I cannot use.

 

[Kenjiwing]

Isnt it possible to take the 2nd connector off?

 

[TheGamerZ]

I have found some but they have a second SATA connector, which I cannot use.

A pair of scissors or wire cutters will fix that right up.

 

[Diablo2K]

Heres exactly what your looking for, at least I hope it is http://www.frozencpu.com/products/5...to_SATA_Power_Adapter_Cable.html?tl=g2c38s261
if its not they have just about every connector you will need and they will custom make just about any cable you need, just drop them an e-mail.

 

[HardyOne]

LINK
This is what I had in mind, except without the SATA connector in the middle. That is, what I am looking for is just the Molex at one end and the SATA at the other. I had not thought about removing the one in the middle, but I may just have to do that. I am going to sleeve 5 of these together and 5 unused connectors in the middle of a group of sleeved wires would not work very well.

 

[Diablo2K]

LINK
This is what I had in mind, except without the SATA connector in the middle. That is, what I am looking for is just the Molex at one end and the SATA at the other. I had not thought about removing the one in the middle, but I may just have to do that. I am going to sleeve 5 of these together and 5 unused connectors in the middle of a group of sleeved wires would not work very well.

The link I posted is for a custom made cable, just set the options to have the molex at one end and the fist sata at 18", then select none for the other 2 connectors and you have exactly what your looking for.

 

[HardyOne]

I missed that, so that is exactly what I need. Thanks.

 

[Deleted member 16178]

Get one and make it shorter or longer. Custom cables = teh win.