cornelious0_0
[H]F Junkie
- Joined
- Apr 6, 2003
- Messages
- 12,783
Hey all, just have a quick question before I start to budget for the coming months of modding.
At the moment my E8400 is running at 4.04GHz 1.36v cooled by my Thermalright Ultima-90. I have a single Xigmatek 92mm fan on the Ultima-90 that is in the 30-40cfm range and my load temps under full load (Orthos Blend for 4+ hours) are 55c and 51c for Core0 and Core1 respectively.
My dilemma is this, I am planning a 120.2 setup for the CPU alone and I would like to make some half decent headway on my temps/clock speed as well as visual appeal. I'm not 100% set on every piece of the loop but I will be using either a Black Ice GT Stealth 240 or a Swiftech MCR220 (due to space constraints in my TJ08) with a pair of Scythe S-Flex "G" 120mm fans rated @ 75cfm in a "push" setup. Given my current load temps do you guys think it's feasible to expect at least a 10c drop in my load temps with water if I don't skimp on the pump/CPU block?
Thanks in advance for your time, I'm really hoping to iron things out soon so I can start seriously budgeting and planning for what's going to be my most well done modded case/system to date!
At the moment my E8400 is running at 4.04GHz 1.36v cooled by my Thermalright Ultima-90. I have a single Xigmatek 92mm fan on the Ultima-90 that is in the 30-40cfm range and my load temps under full load (Orthos Blend for 4+ hours) are 55c and 51c for Core0 and Core1 respectively.
My dilemma is this, I am planning a 120.2 setup for the CPU alone and I would like to make some half decent headway on my temps/clock speed as well as visual appeal. I'm not 100% set on every piece of the loop but I will be using either a Black Ice GT Stealth 240 or a Swiftech MCR220 (due to space constraints in my TJ08) with a pair of Scythe S-Flex "G" 120mm fans rated @ 75cfm in a "push" setup. Given my current load temps do you guys think it's feasible to expect at least a 10c drop in my load temps with water if I don't skimp on the pump/CPU block?
Thanks in advance for your time, I'm really hoping to iron things out soon so I can start seriously budgeting and planning for what's going to be my most well done modded case/system to date!