• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

specs for picoPSU X for very specific project

S

spikey1973

n00b
Joined
Jul 16, 2014
Messages
1
Hey guys,

we'll me and a friend are working on a very specific (audio) project for which we use a mainboard (gigabyte GA-H55M-(X)) with 1 DDR3 module of least available amount memory (prosuming this is 1GB, don't think 512 DDR3 is made (anymore??))

Also we'll put all mainboard-setting to a bare minimal, (CPU, GPU, voltage freq.) pulling of the cpu fan, which leads to why a load of approx 25W in total.

As said this is for an audio project, all is in favor of increasing audio quality.
to power this all i need as special (fanless ofcourse minimalistic CPU) so ofcourse we headed towards the picoPSU's

So we got us some picoPSU-120's but they don't work, none of them and we have 5 ... We looked into everything.. and at this moment it seems most likely that the problem is that the 120 (instead of the 160-XT) has a switched 12V rail.

So i contacted minibox on the issue and basically they denied it having a switch untill i presented them with there own users manual, which clearly states it does.
All i need to know from them (or anyone) is a what load does the power supply switch on.
But they have stopped reply-ing...

so is anyone here familiar with the minimal load needed... ?

you could help me al LOT!!

kind greatings

Matt
 
You must log in or register to reply here.
Back
Top