It's been a long time since I had the resources to build an entirely new system. I was like a kid in a candy store when I was looking at Newegg... and this is what I ended up with:
AMD Phenom II X6 Six-Core Processor 1090T (3.2GHz) AM3
Gigabyte GA-890GPA-UD3H Motherboard
16GB PNY...
As title suggests, I'm looking to buy an 8gb Iphone 3g. I can currently get one from AT&T fro $400, but I'd really like to spend in the $300 range. Please let me know if you have one. Best way to contact me is e-mail: bmrust (at) gmail (dot) com
Thanks
Looking to purchase an iPhone...only need a 4gb version.
Please reply or PM if you have one available.
Or you can e-mail me at bmrust (at) gmail (dot) com
Thanks!
Here is the list of parts:
Athlon 2500+ w/ heatsink $50 SOLD
ASUS A7N8X $55
1 GB Corsair Value Select (2x512MB) $65 SOLD
40 GB Maxtor 7200 RPM $40
52x TDK $30
ATi Radeon 9600XT w/ Arctic Cooling (Rev. 2) $70 PENDING
SoundBlaster Live! $15
X-Blade ATX Case w/ PSU $60
15" Dell...
I'm looking to buy 1 or 2 1978 SIMON games. I am looking for good quality, but by no means mint condition.
I could care less if you have the instructions, let alone the box. I just want the game.
Looking to buy for $15-20 shipped (each)
Please email me at contra(at)lanextreme(dot)com...
I am looking at renting this generator (for a LAN Party)
http://www.rentrain.com/weaversrent-all/product.html?id=31295
I've been told that a computer uses 3-3.5 amps (with monitor, no speakers) how many systems can i power with that? is there a simple conversion of watts to amps...
Can someone link me to information regarding this, or just explain it here....
If I want to run in SLI mode, can I have a 6800 and a 6600? or, even a 6600 Ultra and a 6600GT? Or, for that matter, 2 6600GT's from 2 different manufacturers?
Or, do they have to be EXACTLY the same...
Well, here it is, my next project. I am getting a Silverstone TJ04 and being black, I dont want to paint it. SO....what's black, fun, and different?
SIMON!
Here's my plan, 4" CCFL's w/ electrical tape to make the light go where I want it, and only where I want it. The back of the...
I saw a pic of a case w/ 2 colors of cathodes in it...top half was blue bottom was red (i think)
I need to do the same sort of thing, but I cannot find that pic (or a worklog)
if anyone knows where that pic/worklog is, please post it
thanks in advance
I'm looking to get a case...does not have to be fancy, just easy to mod. I don't want to spend a lot on it (less than $50 shipped)
I'll be painting, cutting, drilling, etc. to it, so i dont really care what color it is
Any help would be nice.
Thanks!
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=150-548
I'm hoping to find them a little less expensive than that, since I need 25 (about $100 total)
If anyone knows a good place to get these, that would be a huge help!
Thanks!
I want to make a platform that moves up and down by a switch (possibly remote control, but a switch would be fine for now)
I have no idea what i need...do i need hydraulics, or do i need a cable/pully system...
any ideas at all?
I can overclock, not excessivley, but decent speeds.
Problem is, whenever I restart my computer, the settings dissapear. Is this true for everyone, or am I doing something wrong? Im using the Omega drivers and RadLinker for the overclocking.
Please help!
In need of a web designer. I have the base down, and the site is fully functional. The person I am looking for should have a good knowledge of PHP-Nuke and PHPBB2 skins. I need a skin for both (all inclusive).
Please contact me via the following for more details.
AIM: X NetJag X
or...
Ok, here's what I've got to work with:
Where do I start?
The IDE cables are preset, pre-rounded, and pre-covered, so they are set lengths.
The Water tubes are going to be too much of a head-ache at this point to cut, so they are set lengths.
The only things I can change at all are the...
My LCD reads "-L"
Everything is working, I'm getting good temps...but the LCD reads -L.
There is nothing in the manual about Troubleshooting, or anything to begin to show me where to look for the problem.
Thanks in advance for any help!
I turn on my system, it stays on for about 10 seconds, and turns itself off.
Did the same thing when I tried clearing the CMOS.
Any ideas, suggestions, comments, ANYTHING would be helpful.
Thanks!
Looking to buy a 40-60 GB Hard Drive, 7200 RPM, IDE or SATA
I want to spend less than $30 shipped (I have $28.19 available to spend :))
Let me know if you have anything that would meet this criteria.
Thanks
-----
Heat: contra & xnetjagx
email: contra (at) lanextreme.org
I'm trying to make a bezel for my case, and I am using clay as the base of it (forming a mold from that, and going from there)
However, here's the dilema...
My mom has clay, and a kiln...I formed the clay to the shape I want, but I don't know how long to fire it for. My mom is out of...
I'm looking to cover up a hole in my case (previous owner put it there)
I am wanting to use mesh of some kind.
should i buy it at a local hardware store? or is there somewhere online to buy it?
http://www.foxtec.com/products/view.asp?ID=4296
Not the best price i've seen, but not too bad considering no rebate.
EDIT- Just noticed it says CONDITION OEM/REFURBISHED...
Not sure if that means it is refurbished or not, tho.
I've searched all of google...with no real help.
If anyone here can tell me how to mold resin, and help me find out where to buy the stuff to do it, that would be awesome.
What I am wanting to do, is make an addition to my bezel. I would attach it with either superglue, or screws (if the...
This is where I will be putting all of my pictuers, and stuff for my new computer.
Here's what I'll be starting with:
Lian-Li PC-61 - Silver
ASUS A7N8X-Deluxe
Athlon Mobile 2500+
1GB Kingston HyperX Dual Channel PC-3200
ATI Radeon 9600XT
40 GB IDE Hard Drive
52x CD-RW Drive
Here's...
I'm lookin for a CPU and some ram...
Sempron 2500+ (or something close)
2x256MB Dual Channel PC-2700 (or something very close)
Let me know if you have either of these, or both.
Lookin to spend around 55-60 on the CPU (shipped) and about 70-80 on the ram (shipped)
Thanks...
I'm lookin for a video card. I'm lookin to spend about $100 on it. Anyone got a card to sell me?
I will send money first, if your heatware is greater than mine.
Thanks!
I'm upgrading my computer, and I want to get some money to do so...
Heat and ebay are in my signature...
Now, on to the good stuff...
Shuttle SK41G w/ FX41 Motherboard :: $150
AMD Athlon 1700+ :: $30
LeadTek GeForce4 Ti4600 A250 (Retail) :: $150
More Information
IDE 20GB...
I have opened up the ordering of the Car Flags. They are ordered and are being produced now. Once I get them in, I will be shipping them out ASAP, in order to get them in your hands before you leave for QuakeCon! The flags are WHITE with BLACK printing on them.
I have created a simple...
Hey all you graphic whizzes out there....Here's your chance to win some MONEY!
LANExtreme is having a T-Shirt Design Contest. We are looking for a single color design for our t-shirts. Unless someone shows me something that I like better, I will be going with orange ink on a dark gray...
Looking to spend about $30 shipped on a 16 port 10/100 switch.
Will not use paypal, i will be sending a money order.
if anyones got anything, lmk.
heat and ebay are in my sig.
i will pay first, if heat + ebay is higher.
thanks.
LANExtreme is having a LAN Party in Bloomington, IL on May 14-15. We always have a Hooters run before the party. Great prizes, great gaming, great people.
Come check us out if you are in the area!
http://www.lanextremeparty.com
Hope to see some [H]ard Gamers there!