Search results

Sorry for your loss. If it means anything, i've subscribed to this thread since your first post and every time i see an update, it makes my day. As a few people have already said, i really do think that there are more people than you know here who have always been rooting for you and eagerly...

my x9 sae-v beeps too but it seems normal. my x8ste board also has similar beeps and it just seems its normal? anyway i reupped the file here too for those that need it: http://www.mediafire.com/download.php?ahjva0hr1fg6gvd i've been getting PMs that say the file factory link is flakey :P

hi all, as has been requested numerous times from me, here is the updated BIOS that i use: http://www.filefactory.com/file/6uy7wcosozxl/n/x9sae_tA112.zip part of the instructions i got for when i received this from Supermicro to fix an issue with my PCIE HVR2200 capture cards was to do this...

ive got an updated bios from supermicro (build date as of 10/05) that picks up my hauppauge cards fine now, so if people would like it, please pm me and i will send it to you

I've been working with my distributor for SuperMicro and ive been given an updated bios with a build date of 10/05 (so only in the last week) and thus far my PCIE issues seem to be fixed. if anyone else is having this issue, PM me and i can email you the updated bios but dont hold me liable if...

Yep, i've got a X9SAE-V and am experiencing the same issues as you with my 3x HVR-2200. They worked a charm on my X8STE but on my new mobo, they do absolutely nothing! any updates on this?

i just got a X9SAE-V and am encountering some issues with it, mainly that it doesnt detect any of my Hauppauge HVR-2200 capture cards which are PCIE x1. Does anyone have any idea? ive changed the PCIE modes in the bios to no avail and these cards are definitely working as they were pulled off...

Any ideas on this? We would like to use the HD4000 on the i7 series or the P4000 on the Xeon v2 cpus, on a server grade motherboard. I can see desktop/workstation boards are available but any server grade? Thanks

my work is trying to spec up a server to do some transcoding and we were wondering which server motherboard to use. we will use a socket 1155 processor, either a xeon or a i5/i7 to make use of Quick Sync my research thus far shows that for a server board, the chipset must be C206 based to...

so i reinstalled freenas 8 on a new sandisk cruzer slice 4gb and all seems well at the moment after i had auto imported my volumes however ive noticed that the speeds have dropped when accessing via CIFS (which is the only one i use) from a windows 7 machine for reference, my microserver has...

well i reinstalled and did the volume auto-import and now it is working fine... im still skeptical though because previously it was fine also but some how it decided to poop itself. anyhow this time im using a better flash drive so hopefully all is well and im quite liking this auto-import...

i just downloaded FreeNAS-8.0.4-RELEASE-p2-x64.iso and am installing onto a new Sandisk Cruzer Slice 4gb so will see how that goes and then try to auto-import my raidz1. hopefully should all be ok, any tips? well the previous usb drives i had used was a transcend 4gb model and a random 2gb one...

i've tried another USB stick already and still the same issue. Which freenas8 version should i be installing? my process is to get the iso, burn it to CD, then insert USB drive into the microserver and boot off the CD. on installation i choose the USB drive and just let it do its thing. Is...

i have a n36l with freenas 8 on internal usb and every time i shut down and restart the server, the bootup will hang, leaving me with the F1, F2 and F5 options but is completely unresponsive to all inputs. to fix this i have to boot off a cd and go through the upgrade process again. any idea...

nice setups everyone, however just curious as to what people are doing with the front dust filters on both the 120mm intakes? I have a R2 and they get clogged up so easily and cleaning them is such a pain as i have to take out the entire assembly and unplug the fans etc. My R2 sits on my desk...

Thanks for sharing, all the best for your goals and my sincere regards for you and your family. Take care of yourself.

Hi, at work we use Intel S3420GPLX motherboard with the AXX4SASMOD expansion card to run extra hard drives(total of 9) and i've often encountered a weird problem where the AXX4SASMOD card won't pick up some of the drives on some of the ports. Now, this isnt a once off incident as we've built...

i really like the old Cosmos S cases.... but the new one.... eww...

i dont post much but i've been following this and just had to jump in to tell you to keep up the good work and never give up!

thx sooo much~~!!! worked like a charm, much appreciated!!! wonder why the hell its like this..... :P

i have a gigabyte 965p ds3p v3.3 and it has run fine for the past 2 or so years. but today, when i booted up i saw it was running at stock settings, so i reset and got in the bios. enabled the advanced config (ctrl + f1) and saw that all my original settings were there ie (8x375) and my...

pc is a 1.6 centrino 512ram geforce go fx5200 64ram(?) normally i would think its a refresh issue but im not so sure. however i will give CCCP codecs a go and see if that works later today then ill install a MPC-HC and if all fails, ill find newer drivers. drivers will be my last resort...

kk i will give that a spin first, however i checked that VLC does the same thing

i have a laptop with a dead screen which i use to connect to my bravia X hdtv and is connected via VGA, running at 1920x1080@32bit@60Hz. the hdtv is my first screen as detected by the display settings control panel(laptop video out switch made the external port primary) anyway, when i play...

seagate issued a notice that they recognise the problem finally! hopefully a firmware will be out nxt week

damn i went to try and buy a samsung F1 today, but the store suddenly discontinued ALL SAMSUNG drives...... slightly worrying.... but yer i want a new drive asap. but apparently seagate are releasing a firmware next week (dont hold your breath) based on what i read on the seagate forums

how about the samsung F1s?

So i have 4 seagates in my pc with 2 which could be susceptible to this 7200.11 epic fail trend. Anyway, can anyone recommend me some sata 1TB drives? im thinking of getting a WD Green or Black, but then again i havent done any other research into it. I dont need speed, reliability is...

Hi i am looking for a USB wifi adaptor which has a good signal and range. Preferably there is one which can accept an external antenna or maybe one which can be modded to accept an external antenna? atm i am using my internal notebook wifi which is not powerful enough or i have a netgear...

I've always had this issue, and that is that the system hangs after loading the WinXP logo at the black screen right before booting into windows. Everything else loads fine, just that it will stay on a black screen for a minute or 2 and do nothing, then winxp will resume booting in a hurry...

BartPE looks hard to use.... i guess im looking for something simpler to use. how is Acronis btw? i use the Acronis Disk Director and find it quite handy to use

sorry, but could you please provide more detailed information? waht you have described seems to be pretty much exactly what i want, but i am kinda lost....:P eg, what is sysprep, bartPE, and how come u r using ghost but never installed??? Thanks for your help. Muchly appreciated! Regards

i just formatted my laptop to do a fresh install of winxp SP3, and now i want to make a clone of it, so that in future i will be able to boot with a dvd, then just load windows back on automatically. Now, i have norton Ghost 14, but have NO IDEA how to use it. which option should i use...

it just puzzles me why they would put an engineering bios for a retail card? i jsut assumed that engineering bioses would be older and possibly slower

I got a Inno3D 256MB AGP DDR2 7300gt and there is something i realised. when i start up the computer, it says that the bios for the 7300gt is an engineering release and is not for retail....what does that mean. it is a retail card i bought from a store does this make it slower? is there a...

a benq 241w is nearly $1000 over here. in australia, there arent many places to buy hardware, let alone a large selection of them at a reasonable price hence my decision to stick in the $400-700 range

sorry... yet another one of my threads. basically, want to use for PC and PS3 and thus have decided upon these monitors from what i understand, i am led to believe that the 226BW is superior to the 225MS however, the Samsung monitors dont have height adjustments which i prefer. as a result i...

Maint screen? does that mean i have to turn on the monitor and go through menus before i can find the panel it uses? i doubt any retailers will let me do that around here HAHAHA :P for the 2232bw i did read up on it just recently, and yes it looks like a tv, however apparently its not as...

actually, how are the Dell 22 and 24 inchers? the 24 can support full 1080p. hows the quality of them??

http://community.eu.playstation.com/showthread.php?t=91323 apparently they say the 226BW is decent for ps3 usage?