Search results

I had a similar problem when I water cooled my 7800GT. The only pads were on the video card's memory. When I upgraded I couldn't find the pads, but I remembered what my pads looked like. They looked as if it was multiple layers of medical gauze with some thermal compound squished in it all...

Just fixed my dads Zotac 9800 GT 512 MB. :D Baked it at 385F for 10 min. I tried the card the next day and it was fine. I had some weird but continuous sequence of dots and blips across the screen. I thought the memory may have gone bad. Colours were low since the video card didn't have...

AMD FX 60? http://www.anandtech.com/show/1920 But honestly, I upgraded my 939 when I couldn't play crysis. Newer cpu, chipsets, it all gets better. Could even go with a lower end upgrade, and it would still be faster. Compare it to your i5 system. ps my old system is in my sig still... its been...

I was using a DVI to HDMI cable. I havent tried it on a 1080i/p box yet as I don't have any. My brother used this cable for his hdtv at 1080p. He said it looked good on his. I will his cable again tonight on his setup. (46" Samsung 1080p) I borrowed the cable from him, and if his works...

Hi, I got a new 52" Samsung LCD 60Hz. Now when I try to set it up 1920x1080 it looks awful. It works at 60Hz, but the colours and quality is just bad, the colours are dull, flat. The quality looks very pixel-ated. Even with text I can see a few different shades of grey instead of white and...

Yay, I got my letter from BFG... to late as I had already cashed the cheque, I guess I will recieve the bounced cheque and send that to BFG, not to mention a bill from my bank for the bounced cheque.

Okay this is weird, it works with a 40pin IDE cable but not an 80 pin. :confused: This is an Nforce 2 Ultra *Asus A7N8X* motherboard. So before I went to test the same hard drive with the 80 pin cable into a much older system. Abit KT7A Raid, AMD 1400, and it detected fine. :rolleyes: So...

Oh yes +/- 5%. So that seems a bit better. On the other hand I tried the same IDE cable in another computer, and it detected the drives fine. Just got back from shopping, so I might try another cable. :) Edit: Yup I went from an 80 pin IDE to a 40 pin IDE and it detected... lol, the 80 pin...

I am using the BIOS to see the values.

Hi I've tried to connect a hard drive, and it is not detecting, I tried it in another comp and it does work. Could it be that the 12.32v 12v line too high? And may even damage the drive? The computers last hard drive died, and then I realized how high the 12v line was.

Hi my I am trying to fix my uncles comp, and now the hard drive spins up, but doesn't detect. I was wondering since that the PSU (Enermax 465) is giving out 12.32v on the 12v line. My question is, is that enough to kill a hard drive? Or to make it work improperly? PS his last hard drive died so...

Yeah I might have one lined up, just gotta find a friend with paypal :)

:eek: :( . Thats so cruel. lol

Sell me the cooler I need one. :D

bump

I'm looking for a stock heatsink on my Geforce 4 Ti4600. CAN BE DEAD TOO! Either from 4400/4600. Would prefer a VisionTek one, but will take what I can get. Thanks. Edit: I need it for warranty since I have until Augest 2006. :) I got a new fan, cause my stock was dying/dirty and I gave...

Okay, I got a Leadtek 6800 GT PCI-E Card for another computer, and anyways it doesn't boot on my DFI SLI-DR Expert board. I have tried it in both slots, and it kept having a cold boot issue, until it stopped on the 1 LED, meaning a video card detected OK, but it just stopped there and I don't...

bump

bumpo

bump

Bump

bump

Can always put it upside down I bet or side ways somewhere. :D

I'm just worried incase if I ever do need to RMA it, think leadtek would look at the screws? :D

If you find any I will gladly pay for your help and shipping. :)

bump! :(

Bump

I've asked Leadtek for some, but their no help since there isn't an official part number to use to order from. :( I emailed them recently about purchasing the entire cooling unit itself today. :) Edit: When I asked about purchasing the cooler I got this. "I am sorry, the cooling fan on the...

Anyone know where I can get them? I'm sure if you got the the same screws on diff videocards will work. Oh I've seem to have lost my screws for the leadtek 6800 gt agp. I need to move it back to air since I upgraded. I've been trying to locate them, but they have fallen off the face of the...

Bump

Bump

Oh I've seem to have lost my screws for the leadtek 6800 gt agp. I need to move it back to air since I upgraded. I've been trying to locate them, but they have fallen off the face of the Earth. :( I need the 4 Screws/Spings or I'll buy the cooler off you instead. :) I've asked Leadtek for...

Oh I've seem to have lost my screws for the leadtek 6800 gt agp. I need to move it back to air since I upgraded. I've been trying to locate them, but they have fallen off the face of the Earth. :( I need the 4 Screws/Spings or I'll buy the cooler off you instead. :) I've asked Leadtek for...

***EDIT*** I fixed it myself. The problem was I had Raid enabled on its channel. I turned it off, and voila it detected fine, and works again in windows. Thanks! ************************* Okay, a few days ago, I noticed my Drive ( F: ) wasn't showing in my computer. So I turn off my...

:( Okay I got some big rar files ( +2 GB), and my C: on this computer is 6.2 GB with only 1gb free hdd space. So when I extract it, it goes to my C:\Documents and Settings\Darryl\Local Settings\Temp Is there anyway to change it from always going to that temp folder? I've gone through the...

Finally I got a new comp yay. So I got an X800XL boots fine and everything until I go to get drivers for it. I go right to the net, and get these. https://support.ati.com/ics/support/KBList.asp?folderID=368 My order for installing stuff is like this: NF4 drivers, then Video. I am also...

I am having a similar issue too with Windows 64. I am installing my video drivers from ATI, and they're the 64bit drivers for my ATi X800XL. Now when I install the drivers my goes on and off a few times, then it goes blank. Total lock up. I reboot, and I can't even get the Windows Logo, and bars...

I just use some left over acrylic I had laying around to do mine for my 120mm rad. I am really happy with the final result though, that was just one of my work pics. If I could find my damn camera I could snap a nice one :)

Okay I use this as a CS Source server to play on my 5mbit connection and when I went to start it i wouldn't run. Long story short the NIC was completely gone. Nothing in device manager. I've tried clearing the cmos, incase there was an option for it to be disabled, but alas no luck. I am totally...

Cool! :) Rather buy one now, so I dont have to wait. :)