Search results

  1. T

    Project Arclight

    IM BACCCKKKKKKKKKKKKK..... it has been one hell of a year but i am back and Arclight is still alive. I am sorry to anybody whos replies i have missed for all this time BEHOLD AN UPDATE.... yes, yes, I know, took my sweet time. HEY!! you try modding and having 6 kids So where were we...
  2. T

    Project Arclight

    The lower rad is super thick 66mm, plus fans on top 91mm, the space under the cover is only 110 and i needed to get tubing in the spaces, fans are running 900RPM in push, the rad is quad pass so so far it is working just fine with the one stack of fans
  3. T

    Project Arclight

    Thank you very much, lots more to come over the next week
  4. T

    Project Arclight

    just a quick message to my followers I have been rather ill this week and completely unable to even look at a power tool let alone operate it safely, i am now recovering and will be back to my insane self in a few short days
  5. T

    Project Arclight

    I will be reworking the res slightly, i need to swap them for EK multiport 150s and add a GPU block, not sure how i am going to get space for that so i am open to suggections
  6. T

    Project Arclight

    Visual Mill 6.0 for the path generation So its not just me who loves tool marks... yay CAD Solidworks 2012 CAM Visual mill 6.0 with Visual CAM 1.0 pug in CnC control Mach3 2.1
  7. T

    Project Arclight

    continued.... erm.... some more back to milling the center this time leaving zero stock, this was make or break, if i had planned anything wrong the whole piece would be ruined, but it seemed that lick was on my side full cleanup can wait until all the cutting is complete for some scale...
  8. T

    Project Arclight

    continued...... after getting the centre to full depth the tricky work can begin, the endmills i use have a flute that is 12mm long, this limits me to 12mm depth or i will not get any kinf of chip evac when cutting......... but i ignored that and took them 20mm deep mach3 with custom...
  9. T

    Project Arclight

    yes up cut clockwise, the compacting is more due to the geometry im cutting then any tooling issue, air is working well for the most part, added a small holder for an airbrish and currently modifying a hydroponic plant drop feeder to supply coolant some 1f endmills are on the way om hoping that...
  10. T

    Project Arclight

    ive done a lot of research in to feeds, this is also a cast, make up (due to supplier) being more similar to lexan then true acrylic so the melting point is through the floor, im also limited on speeds with a max rpm of 11k, ive bought some metal cutting pol and its fixed the melting issue...
  11. T

    Project Arclight

    once my confidence with the machine grew i finally ventured in to alu milling.... with TERRIBLE results, screaming mill and terrible tooling marks. after 3 weeks i finally worked out what was wrong, no coolant/lubrication, so out came the WD40 and away we went the arclight main bezel for the...
  12. T

    Project Arclight

    It is finally time for an update As most of you know by now a short while ago i acquired a small CnC mill with which to being my twisted imaginings to reality. here is how it went As i completely forgot where i left my shots of my mill here is a stock shot of the exact same model, I was...
  13. T

    Project Arclight

    I am VERY pleased to announce that EK is now official sponsoring Arclight, they are kindly supplying enough equipment to rebuild the entire double loop set up Stay tuned for a supply drop and more updates
  14. T

    Project Arclight

    lol yeah, looks like it is a "by popular demand" ile get my driver and camera set up when i have some peace form my legion of kids
  15. T

    Project Arclight

    yeah, ile get one up with my next update if not sooner
  16. T

    Project Arclight

    Construction is 90% complete and its already in service as my main game machine, side door needs a window and massive changes are going to be made to the front of the case So im going to show off some of the key features so far modified intakes and bottom deck enclosure Access ports...
  17. T

    Project Arclight

    With most of the structure and covers complete i can start the loops, that was a tad more involved than i expected, clearance between the top of the PSU and the Top of the floor enclosure is just big enough to get a 1/2 OD tube through... and i need to get 6 through it Starting off... install...
  18. T

    Project Arclight

    First test fit of all the enclosures plus checking that weight of the res holders will not warp the top of the enclosure Pass through holes cut for Tubing to and from the twin res, due to access the PSU, bottom Rad and main PSU looms are already installed in the lower enclosure Well...
  19. T

    Project Arclight

    All good mods start with a plan.... well thats me out of the window But at least i got some penile work done measuring up the plastics for the enclosures Overkill 120 grills make handy stencils of.. erm... overkill 120mm grills Acrylics cut to size and welded with Hindleys...
  20. T

    Project Arclight

    Time for the update that has been a long time coming As most of you know the case changed from from an Enermax Fulmo GT to an Azza Genesis 9000 as the Genesis offered a stronger frame and more internal space to work with.... before work started it looked like this... and the...
  21. T

    Project Arclight

    Although ive had a long break from posting my work has continued, i finally have time to sit and type So i shall pick up where i left off The rough cuts were plastic welded in to pairs of one blue one black each with liquid dichloromethana injected in to edges to form 12 completed pairs...
  22. T

    Project Arclight

    Just a little update today An absolute ton of cutting and sanding today Well i dont have access to a lazer and i need a lot or duplicate pieces to were rocking it old school with a stencil And what better to cut out my many many parts than a home made table saw, complete with mitre...
  23. T

    Project Arclight

    Arclight was origionialy designed for the Enermax fulmo GT a huge and brillicnt case, but time has marched on and Azza have offered me the chance to use there superb Genesis 9000, so a little redesigning was called for, Concepts for the intakes have been redesigned to better fit the new...
  24. T

    Project Arclight

    Behold my latest creation to be Project Arclight will be a huge case built on an Enermax Fulmo GT chassis with some serious power behind it also provided by Enermax in the shape of the mighty Platimax 1200watt psu Te Arclight will be an all acrylic outer shell with a double action doors...
  25. T

    Project Sulaco

    Lol, tempting, although i am currently in talks with a company looking at acquiring a 3d printer, so possibly some very exciting content to come
  26. T

    Project Sulaco

    Update coming soon. the joys of being a father all your free time goes down the toilet
  27. T

    Project Sulaco

    Supply Drop As the project reaches its close and the next project is waiting in the wings I was delighted to hear that Bitfenix wanted to share some of there products with me I am usually dubious when it comes to pre-sleeved cables you never quite know what to expect in terms of quality...
  28. T

    Project Sulaco

    As a little aside i decided to get a table saw or a bandsaw, BUT i cant afford one and my wife will kill me if i do buy one So whats the solution..... MAKE ONE Heres a quick guide You will need.... Cheap workbench Old Shelves Spare wood (must be perfectly straight) Wood Screws G or speed...
  29. T

    Project Sulaco

    Just before the festivities i managed to get a rare nugget of time to finish the PSU shroud First up a monor admission...... the mk1 broke a bit.. a child of mine who shall remain nameless knocked it on the floor causing the most frantic game of jenga in the history of the universe so the...
  30. T

    Project Sulaco

    I tried that, ive got the stuff laying around by the bucket full, its a very specific type of plexi, not exactly sure, but i have found exactly ZERO colvent, glue that will work all it does is frost it
  31. T

    Project Sulaco

    Big update in the works, another supply drop ASUS this time and more work on the PSU shroud
  32. T

    Project Sulaco

    UPDATE TIME!!!!!!! So this week its been all about the PSU cover and res holder combo BUT.. there was a problem, when i could have ordered some nice smoked (very easy to cut and bond) Acrylic, i messed up and ordered the nightmare to cut and bond that is Perspex (plexiglass) so there was some...
  33. T

    Project Sulaco

    Supply Drop It is that time again and another supply drop has arrived, this time it is my much anticipated EK Watercooling So lets see what we have on the box........ Fittings, Res, CPU waterblock, MB waterblock, Pump, and Some EK UV blue coolant First up for a closer look, the...
  34. T

    Project Sulaco

    Fear not Guys and Gals i have not abandoned you all, i am waiting on a ton of deliveried for supplies and several sponsors including Enermax ASUS SpecialTech Lots of updates on the way as soon as i get my shipments
  35. T

    Project Sulaco

    One of my fave activities today..... Chassis cutting The NZXT Tempest Evo can accomodate a 240 this rad in the roof although you wouldnt know until you take the 140mm fans out. So i was about to make some templates for some rad holders when as i took the 2 140mm fans out of the roof i...
  36. T

    Project Sulaco

    What's on the menu today???...... Filling... mmmmmm my favourite... *Runs ff to cry in the corner* I hate filling but these things must me done, the first plan for the side had 2 vents on the side of the window using the old window shape as a guide, but on reflection it just looks like I...
  37. T

    Project Sulaco

    lol, Yes it is nice, especialy being a low budget build to launch myself
  38. T

    Project Sulaco

    Finaly got time for an update, here goes.... Time I started work modifying the NZXT Sentry LXE to modify it for the front of my case top Cutting is going to take a while, love or hate NZXT most will say there products are sturdy and the LXE is no different, the front bezel is 5mm anodized...
  39. T

    Project Sulaco

    BUSY BUSY BUSY, finialy has a chance to get a good run up putting the side pane together and making sure it all fits before final sending and painting Electrical tape, the modders friend This was a nightmare to get all the components in place to drill through what was technicialy a sandwich of...
  40. T

    Project Sulaco

    SUPPLY DROP A few weeks ago i was delighted to hear that NZXT had been kind enough to sponsor my project, for me this is fantastic, although sponsorship is a day to day affair for the more established in the modding community but for the new guy sponsorship is a big risk as they cannot be 100%...
Back
Top