Search results

what I like about Corsair, Excellent Customer support - they fixed my HX750 psu for me when newegg wouldn't Excellent Prices - I bought my H60 for $60 and never looked back Fingers crossed I win something? :p

I could really use a Galaxy graphics card because I currently have nothing but onboard graphics and its no good for 3d work or gaming, also, If I had the money I would buy a Galaxy card but times are hard.

I need one of these because intel integrated graphics on my i7 are just not working with the rest of gpu-less system :(

and in another update, i managed to get it working by jumping the lead into the receiver after power on and letting it auto detect, seems it may be a hdcp issue. Still wont work when connected directly which is puzzling???

ok so update, got the pc to run hdmi into the receiver and then hdmi to dvi to the monitor and that works, however, when I plug the xbox hdmi in the receiver also, goes no signal, as if the xbox is jamming the line. could this be a hdcp issue with the screen? or EDID problems?

ive tried, Ive set it to 1080p and nothing, Ive also tried bouncing it through my sony receiver to see if that worked and still nothing. the ps3 I tried to use was also the same, its like its locked into my pc somehow, but even that makes no sense as Ive had 3 different mobo's and 2 graphics...

yep tried with both DDC CI on and off and still no luck, Im starting to wonder if the DVI port is defective in some way, as I really cannot for the life of me figure out why it wont show.

Can anyone help with this? I've had the monitor for 2 years now and it worked flawlessly up until I tried using a HDMI to DVI cable to use the monitor for Xbox. No matter what I try, I cannot get it to display on the EA231WMI at all. Ive tried the Xbox to the monitor via a dual link...

Kirinji: no problems, anything else you need just ask. In the retail package I received from DirectCanada.com, the H60 has one fan, and the install brackets. The fan is a PCM controlled 4 pin, and the pump uses a normal 3 pin. I also found both the wires for the pump and rad fan to be plenty...

Kirinji: I have the H60 installed and it not only does it fit perfectly, leaving plenty of room for the intake to spread the air, but it also has awesome performance and is a lot quieter than my previous H50. I'm using it with just the one fan replacing the silverstone 120mm up top so as to...

Old Hippie, just tried updating to a different set of drivers and that seems to have cured this, I guess it was something incompatible with something else, which seems a bit random but ah well. Intel drivers seemed to have fixed this so thanks all for the help :D

Thanks havermeyer I will check and see if I can get a fix, it may be one of the chips is dying. Old Hippie, the drive was never beaten with 3 runs of AS-SSD, if you read the original post it clearly says today, two weeks and feb. I also understand how garbage collection and trim work, as...

Thanks for the replies, I should have made it more clear that the loading times can vary from say 3 seconds to load Photoshop CS4 to about 30 maybe even 35, which although you have stated frantic but I would of thought that a difference of that scale would be more problematic? If this is...

Hi all, semi issue here: My c300 is acting inconsistently and I have no idea why, however I have 3 bench tests from varying times here if anyone can see a problem. From left to right, excuse the quick image bodgery: Today - MSI H67 sata 3 / AHCI setting 2 weeks ago - MSI H67...

Just got my FT03 and installed everything temporarily, while I wait for the X560 psu to arrive. First impressions: Having owned every other Fortress case, I feel I can safely say the following. 1. Quality compared to the FT01 and FT02, the build quality is dipping here, its not bad...

about a week now, the whine is pretty persistant.

Just tried updating to Realtemp 3.67, so far still no change with the multiplier readout, although it's recognizing the CPU ID now. Is the Wattage read out on the front reliable at all, because even on stock 1.16v at 100% load through prime, i'm topping at under 60w and at idle, 7.1-7.5w...

ahfu: I have no idea what negetive offsets and load line calibration is, if you could help out at all that would be appreciated, basically, I'm trying to get this to throttle right down when idle and web using and then to max when needing heavy loads. I'm using an MSI H67MA-E45, but so...

Trying to undervolt mine now, what Bios settings are you using djkest, I'm using an MSI H67MA-E45 and so far using some power saving options gives me a horrible whine coming from one of the chokes. I've got C-State and EIST on atm, apparently that's disabled my turbo boost, but I can't...

Thanks ToastyBread, I think I'll go with the H60 as the main reviews I've looked at have it pinned just a little better than the H50 but quieter aswell. Considering the cheapest I can get another H50 / H70 is over $75 before Tax and Shipping and the cheapest I've seen the H60 for is $65 +...

Thanks for the replies guys. I have considered the side panel coloring and am really 50/50 with it as I would like to upgrade my NEC to a Cinema Display in the near future and was hoping that the Silver case had aluminum to match that, however, if as previously said, the case is painted...

Hi there, I have a black FT03 on order, but may change to a silver model whilst DirectCanada sort their stock out. Can anyone with a Silver FT03 post some pictures with all the side panels on and it sitting on the desk please? Thanks. PS. I am 3rd time fortress owner, having an FT01 i7...