Search results

Understood - may need some tape to seal off the other areas that air can escape around the shroud to make it work; that said the hot air that escapes out the bottom will come straight back in through the 140mm fan wouldnt it?

I was thinking the same thing actually - make some fine holes in the side of the case where the fan intake is and use some foam tape to build it up so the GPU fan only takes in fresh air. However for ease Ill cop it on the chin and go an evga gtx670...Palit and gainward used to make some with...

It's too long :( That's the hard bit, combining cooler type plus length..harder again if you don't live in the USA where certain brands aren't available. Paul

Understood, evga 660ti or 670 it is. Just looking at my other options given the nvidia cards are an extra $100 for the same performance. Paul

Whats everyones thoughts on how this GPU would cool in this case? Paul http://www.hisdigital.com/un/product2-699.shtml or any of the sapphire 7850's? look to be more "closed" http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1160&pid=1672&psn=&lid=1&leg=0

Anyone seen the problem where you cant set nbmand to off either via the gui or cli? Via the gui I get the pop up but nothing happens, via the cli it accepts the comment but a zfs get all shows nothing has changed. Any ideas?

This is all I have found but its now discontinued in favour of more open coolers... maybe you can find one. http://www.powercolor.com/Global/products_features.asp?id=396#Specification

Anyone know of a suitable ati 7870 card with the correct style of cooler? I am struggling to find one in AUS. Otherwise its a evga gtx 660 (or ti if I can convince myself). Thankyou Paul

Thankyou, I ordered the case, psu, cooler, optical drive and a few bits today so I should be able to see what you're talking about by the weekend. Paul

Anyone know if the h80i will fit using only the stock 140mm fan? If yes will I be able to fit a fan ontop of the radiator and still keep the optical with little modification? Or would it require major modification to a point that its not worth keeping the optical? Only want to keep an optical...

Hopefully the piping on the 2013 model makes a bit of a difference in that regard.. will let you know when I pull the trigger how it works. Paul

Thankyou for that. Just googling for images and it seems the h60 would be a mod free cooler in terms of its back plate with this motherboard. In regards to modify the optical mount is it just removing the two tabs that stick down towards the bottom of the case or is there more to it...

Hi all, I've been though this thread and would like some clarification. I am planning to put together a system with this case, the asrock z77 Mobo, intel 3750k, optical drive, 16gb corsair ram, evga gtx 660 and 2.5" ssd. So just to confirm, the st45sf is the psu I want and not the gold...

Thanks Jim, Was working on something similar from the cli; i couldnt figure out why they kept dropping off until I checked my jobs and noticed a chmod 777 on this folder which was wiping out the ACLs. Ive now set it at the command line with a /usr/bin/chmod -R...

Hi all, I am struggling with giving full windows pc access to a zfs folder with full permissions - ie no username/password on connection and full access/inheritance to new and existing data. I have been reading a bit and have tried the following: Confirmed devices are all on WORKGROUP Ensure...

Anyone know if its possible to create an other job to run as a non root user? I have a script that runs server rsync jobs and I dont want it running as root for ownership reasons. Thanks Paul

Please ignore - all fixed. I forgot the #! /bin/bash -l command at the start.....

Hi all, I have a script which will mount a usb device, checks it has been mounted (so it doesnt write to a folder in /media) then runs some rsync jobs then disconnects the usb device; if the device is not mounted it will email me. Can anyone explain why this script will run from the command...

Would you know if these will be compatible with the illumos feature flags?

Just an FYI for those unaware - any OS running on the Illumos platform (openindiana, omnios, etc) have moved away from ZFS versions and have instead enabled "feature flags". This means that on say openindiana you can create a pool at v.28 which will be compatible with solaris etc, or you can...

Thanks for that, the NFS clients are running OSX but I will see what I can do. Ive tried to add in the anonuid and anongid's to match my preffered user ID's and Groups but it doest seem to work (If i can make this work then thats the easiest). Otherwise would you know if its possible to...

Hi all, I am trying to setup a zfs folder with full access to everyone but I am struggling and would appreciate some assistance if anyone can help..... Ive read some of posts that say that when guest =on it shouldnt ask for any usernames or password but this isnt the case for me (I have other...

Hi Gea, Im eager to test 0.9 but can you confirm if after installing nappit09 I need to rerun the afp installer? Also by doing so will I loose any afp/smb share information or anything else from nappit 0.8x? Thankyou Paul

Hi Gea, Can you please tell me how/what napp-it uses to send emails? I want to use the settings that are already there for my NUT (UPS) alerts rather than re-invent the wheel if possible. Thankyou Paul

bhphoto have the 3tb's instock - I had an order of 9 arrive late last week.

Just looking for some opinions to make sure im on the right track here. I currently own a no name case which has two norco ss-500's in it - these have 2 x 80mm scythe quiet/high flow fans but are still noisy to me given the servers location. Ive purchased a Norco rpc-450 and the plan is to...

Hi Gea, If I am monitoring your changelog and notice an upgrade to afp 3; to upgrade do I run rerun the installer? wget -O - www.napp-it.org/afp | perl or is there more too it? There is nothing wrong at the moment, everything is working great thank you; I'm just curious to know. Thank...

Thanks Gea, With this in mind would if you were creating a storage appliance from scratch would you use OI? Thanks Paul

Thanks Gea. Just trying to figure out why two of my disks keep spinning up - guessing the auto job on 15 minutes runs the checks for the alert email every 15 making them start up - would that sound right? Sorry by spin up above I mean unpark the heads...I have 2 hitachi 7k3000 2tb's and...

Good evening, Could someone please confirm what the auto service is/does? I have jobs setup for a scrub, email alerts, email notifs and a few other things (all with their own schedules) so I dont understand the auto. Thanks Paul

has anyone had any success with afp 3.0 and timemachine shares? Just setting up a new server, share is setup. I get the an error 17. sparebundle could not be created even though I can mount the share and read/write to it no problems. any ideas? cheers Paul Edit - fixed - had to turn nbmand...

Can someone please point me in the direction to get this file? Problem hasnt been fix yet. Thanks Paul

Does anyone know what the defaults are for spin up/down times? is there anything in the disk firmware telling it to sleep? I have a couple of these in my freebsd box (disks set to always on) but the disk still seems to spin up/down and the load cycle count jumping up high (happens when nothing...

Can anyone please tell me which sata port is what slot on the ss-500 - photo of the back is below to avoid model confusion. Also is the device in the photo below up the right way or does it matter? In my case I have it so the ports are at the bottom not the top. Thankyou Paul

Which version of freenas are you struggling with? the commercial v8? the old community v7 or the forked v9 (nas4free)?

Hi all, I have a new storage server in the making. Its currently a Intel S1200bts with a e3 1230 xeon, 8gb ecc ram (memtested), and two 320gb OS drives mirrored running openindiana 151a with Nappit, Nappit-afp and transmission-daemon installed (from SFE). I have had this crash a few...

Thanks Gea, Im not sure if its affecting others or if its just me. Cheers Paul

No luck paul@Indiana:~$ sudo smartctl -l scttempsts -d scsi /dev/rdsk/c2t0d0s0 smartctl 5.40 2010-10-16 r3189 [i386-pc-solaris2.11] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net paul@Indiana:~$

Thanks Gea, I have run the commands manually at the command line and results are below. Smartctl 5.4 - again not sure if this is just me or others. paul@Indiana:~$ sudo smartctl -l scttempsts -d scsi /dev/rdsk/c2t0d0s0 smartctl 5.40 2010-10-16 r3189 [i386-pc-solaris2.11] (local build)...

Thanks gea, In that case 0.6m didn't make a difference for me with smart sorry. Can you give me the commands it would be calling so I can test them against my system? My disks are sata but I need to use the scsi flag to make them detect (both explicitly listed in smartdconf) and parsed...