Search results

Question about scaling with Nvidia GTX 970. It initially was turned on to Aspect ratio scaling. I turned it off but an am unsure what the difference is. I also read that GPU scaling can add input lag. Also there is a setting for GPU or display setting I am unsure of. Anyone have any recommendations?

I have a Dell U2311H and its anti-glare coating is pretty harsh. Everyone has said the newer ultrasharp monitors are much better. But the older U2311H is not that bad so I cannot imagine this one being worse. My U2515H got delivered on Sat but I won't be home to play with it until Wednesday...

I just realized that you have double the amount of graphics memory than my model macbook has. That can make a difference compared to mine. Also if you use your macbook as a clamshell and only drive the external monitor it might work out much better. I recommend connecting your macbook to your TV...

Looks great. I am glad I ordered this. Cannot wait for it to arrive. Hopefully the 25" screen doesn't bother me with the tiny pixels. I recently had a 27" iMac and moved over to a custom build PC and am missing the screen resolution. I am only using a 23" 1080p monitor right now.

I have the same specs on my laptop. when I drive a 1080p monitor it has troubles keeping up in certain situations. Ie watching videos and editing photos

It would be able to but not sure how well your computer would run. I have a 2008 15" with the two graphics cards and when I drive a 1080p monitor my computer gets real slow. I think our macbook's have similar graphics cards. Which one does yours have? I would recommend trying it out on a friends...

I have a seperate USB 3.0 hub. I have never messed with monitor hubs.

Ha yes. You could take my comment two ways. I am happy the response time is this good.

I was hoping the input lag would as good as the U2715H

This monitor is PWM free / flicker free via TFT Central twitter https://twitter.com/TFTCentral/status/566180332463214592

Currently is only $515 at B&H Photo. http://www.bhphotovideo.com/c/product/1098888-REG/dell_u2715h_27_2560x1440_widescreen_led_monitor.html

Hopefully the input lag is as good as its 27" brother. If not I will be returning it and getting the 27".

Just got one for $417 shipped from Dell http://slickdeals.net/share/iphone_app/t/7664384

Where is everyone finding these in the US?

I have looked around for a few days now and am unsure what to get. I would like to use the monitor for gaming and photo/video editing. I currently have a Dell U2311H and would like another IPS monitor with a low input lag for gaming. Right now I am looking at the Asus Asus VS248H-P, Dell P2414H...

Ok I figured out what was wrong. His write up was missing things because of wordpress not showing them correctly. If you go back he fixed it. #change this to match your primary ethernet interface, re0 or em0 are common, but there are others ext_if="em0" vpn_if="tun0" table <bruteforce>...

I enabled it and followed those instructions and still does not work. Now I cannot access my server and getting no connection. I need to go back and look at my pf.conf file to make sure I entered all of the correct things. But just to clarify if my router is 192.168.1.1 my network subnet is...

Have you looked at the R7 265 yet? That is around $150 and will have better performance than the 560Ti.

Could you share your DNS settings? I want to compare them to mine.

Yea I did both of these and still no go. I will post my VPN files later to make sure they are correct. Also concerning the routing table, do I connect my OpenVPN subnet to my router (192.168.1.1)?

I don't have a firewall enabled on my freenas box. Do I need to do the firewall portion?

I have been trying to setup an OpenVPN server on my FreeNAS box for the past few days and have been having troubles with it. I can connect to the server but want all of my traffic sent through the VPN. When I enable it nothing works. I am thinking about trying out Raspberri Pi but am unsure on...

No running Freenas 0.7.2. I have now had it up and running for 2 weeks now with no problems.

Yea I did update the bios to the most recent release. After much trial and error I think it is the 6 GB/s hard drive speed causing problems with freenas. So I actually sold this hard drive and got 3 more Samsung F4 2tb drives that I know work. Thanks Though

I set up my Zacate board and was getting 60-70 MB/s over my network.

I am using the Asus E35M1-M PRO, but can't seem to find whcih controller it is using.

Ok, so I connected to the mobo on port 1 with nothing else and still does not show up. I have a esata dock so I put the hard drive in there and connected to to my mobo and it shows up fine in Freenas!?!? I am really confused.

I have 2 1tb and 1 2tb along with the 5k3000. The other 2tb Samsung F4 works fine and haven't had any problems.

So, I figured out that if I change my settings from AHCI to IDE in the bios the hard drive shows up. But it is set at UDMA-33 and not Sata like the rest of the hard drives in my setup. Why is this hard drive doing this?

So I made my pool with the -f command. Now when I access it through smb/afp it says "You need permission to perform this action" I did not set up authentication. How do I fix this?

I recently built a Freenas with a Zacate board also. I got the ASUS E35M1-M PRO with 8GB of 1066 Ram because I needed the extra PCI slot. It works amazing with very little power but still get great speeds. When I get mine all set up I will post performance speeds also.

haha no. It had the -m in my log when I got the error when trying to set up the pool in the gui.

Ok I wanted to make sure I was doing it right but last time I tried 'zpool create -f -m xxx raidz device1 device2 device3 device4' and had problems with accessing it via smb and afp. I was getting permissions problems on my mac and pc. What is the '-m' command? I will try it without the '-m'...

I am using 2 2Tb Drives and 2 1Tb drives. When I try to make the pool it gives me an error and in the log it says to use -f command. How exactly do I do this? Thanks

bump I also use unetbootin in embed it on my USB drive. Any Help?

bump Any help? I have tried different things all day but still no go.

it has been my backup for my HTPC for the past few weeks since I got it so it has been working on another machine. It shows up in BIOS but it no where in Freenas does it show it is connected.

I have the hitachi with 3 other hard drives but the hitachi is the only one that is not showing up in freenas. I switched ports and sata cables but still no go. I have looked around but can't find this problem anywhere else. FYI I meant 5k3000 not 5k300

I have freenas on a usb disk am trying to find this file so I can make some tweaks but it is not there. Why is that?

Newegg has ASUS E35M1-M PRO with 5 6Gb/s sata ports and is shipping for $145. I am going to use this board for my freenas build.