Hi all,
I run a Solaris VM in ESXi, passing through a LSI 9201i-16 that is currently connected to 16 2TB Western Digital WD2003FYYS. Space is tight, so I bought a WD Easystore 14TB unit, gutted it, and installed the WD140EMFZ drive in a backup system that has the same controller for testing...
Yeah, pulling the video card or swapping positions was next on my list. I also thought that 1660 was nothing to shake a stick at, but 600MB/sec is what a SSD over a SATA3 port will do too!
Hmmm...didn't think of that, but I did pull the sound card and tried again. Same result. The CPU is an E5-1650v2. I even upgraded the BIOS to the latest version.
Hi guys,
I have an old Supermicro X9SRi-F where the documentation says there is one PCIe 3.0 x16, one 3.0 x8 and one 2.0 x4. I recently bought a Samsung 950 Pro M.2 and bought the Lycom DT-120 and installed it into the 3.0 x8 slot. To my surprise, CrystalMark was showing 1660MB/s vs the...
The route of a Win7 VM and using an Xbox 360 as an extender will work; however, directly connecting an output display to a VM with a passed through GPU barely works and I wouldn't recommend it.
Test setup:
Supermicro X9SRI-F
Intel E5-2620
32GB ECC RAM
PowerColor AX7750 1GBD5-DH Radeon HD 7750...
For the E5, I bought these (Samsung DDR3-1600 16GB ECC/REG Samsung Chip Server Memory - M393B2G70BH0-YK0). The funny thing is when I go into the BIOS, I think it's running at 1333MHz. I also heard things like taking a hit in speed with larger chips or with more RAM to access. It's funny that...
Hi guys,
My original server was a Supermicro X9SCM-F with a E3-1230 and 16GB (4x4GB unbuffered ECC) RAM. I decided that it would be my backup server and I built a new server with a Supermicro X9SRI-F with a E5-2620 (I wasn't going to spend big bucks for something over 3GHz) with 32GB (4x8GB...
It's a HR-01 3U ....made specifically for a 3U chassis. I bought one a while ago when I built a HTPC, but found out recently that they are discontinued when I went to buy some recently. I managed to find a guy who had two for sale and jumped on them.
My original build:
Supermicro MBD-PDSME+-O
Intel Celeron 440 Conroe-L 2.0GHz
Norco RPC-3116
4GB Crucial ECC RAM
3ware 9650SE-16ML
16 WD2002FYPS
As everyone knows, the power supply placement is a challenge for the 24-pin motherboard connector and the CPU connector...
Built a server for my friend:
- Supermicro X9SCM-F
- Intel Xeon 1230 CPU
- 16GB Kingston ECC RAM
- 64GB SSD boot drive
- LSI 9280-16i4e w/ BBU
- 16 Hitachi 2TB drives
- Ceton 4 channel cable tuner
- Thermalright passive heatsink
The power supply that came with the case was generic so it was a...
I recently made a change to my file server where I upgraded to more powerful hardware and planned to virtualize everything (see http://hardforum.com/showthread.php?t=1632435). I played around with ZFS two years ago and I like the benefits, but I was afraid of being new to unix and screwing...
Hey all,
I built a file server in 2009 using some Intel celeron CPU and a server motherboard running WHS. My main focus was power consumption since it would be on 24/7. I have a 3Ware 9650SE 16 port raid controller connected to initially four WD 2TB enterprise drives (WD2002FYPS). At the...
The 3Ware 9650SE-16ML has the battery backup module and the server is plugged into an APC battery backup. I also plan on installing a whole house natural gas generator (plan on having an aquarium and it's just nice in general to know that I would have power in case of an emergency).
Is there...
Hi all,
After almost losing all of my data a few months ago, I finally had a friend bring his large file server over and I backed up all of my data. To recap, I had previously created my filesystem with:
[root@localhost ~]# mkfs.xfs /dev/sdb
While upgrading drivers/firmware, the...
Good news! I ran xfs_repair -n like I had just said. After about 2 hours of scanning, it said that it found a secondary candidate, so I reran the command without the -n switch and this is what I got:
found candidate secondary superblock...
verified secondary superblock...
writing modified...
Thanks for the help guys. I did do xfs_growfs when I went from four disks (in raid5) to seven disks (in raid6). Whether or not it did anything, I cannot say as the larger volume was not available until after I rebooted.
Running xfs_check yields this:
xfs_check: /dev/sdb is not a valid...
I ran TestDisk for most of the day. I first tried to use the "None" option here:
Please select the partition table type, press Enter when done.
[Intel ] Intel/PC partition
[EFI GPT] EFI GPT partition map (Mac i386, some x86_64...)
[Mac ] Apple partition map
[None ] Non partitioned...
reverted back to the old firmware and tried mounting, got the same error and run the same command to check the logs:
[ 354.184308] XFS: bad magic number
[ 354.184313] XFS: SB validate failed
[ 380.090199] XFS: bad magic number
[ 380.090203] XFS: SB validate failed
[ 380.908267] XFS: bad...
here it is:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x2eb80a51
Device Boot Start End Blocks Id System
/dev/sda1 * 1 18662 149902483+...
I tried the following:
sudo mount -t xfs /dev/sdb /media/sdb
and got this:
mount: wrong fs type, bad option, bad superblock on /dev/sdb,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Oh, I...
Hey guys,
I built a NAS running Ubuntu with a 3ware 16-port controller:
http://www.hardforums.com/showthread.php?t=1449908
I followed advice and created the filesystem with:
mkfs.xfs /dev/sdb
I have since migrated the 6TB RAID5 array (using four 2TB disks) to a 10TB RAID6 array...
Maybe this is a dumb question. If you delete the partition and recreate one, this deletes the data, correct? I already rebuilt the array as a 3-disk array and created a XFS filesystem outlined above. It's not growing from 4TB --> 6TB, but I was just curious.
Thanks,
Chester
I'm curious since I haven't done anything yet. Is there a way to expand things with the way I have it, partitions and all? I would like to see if I could make this setup work, just as an exercise.
By all means, I'm all ears =) Heck, I used the default stripe size (256K) for the volume. The main use for this server is to hold blu ray movies, lossless compressed audio and pictures from my dSLR (12MB files, though that might change for the larger if I get a better camera). Any inputs and...
How do you mount /dev/sdb?
There is data on the array as this is a test to make sure I can do everything i need to do before I move everything over and rely on this file server for my needs.
Thanks,
Chester
Hey guys,
The migration finished and I tried to grow the partition using:
sudo xfs_growfs /media/sdb1
It just seems to display information without doing anything.
meta-data=/dev/sdb1 isize=256 agcount=5, agsize=244138800 blks
= sectsz=512...
I did try freeNas and ran into performance issues. Moving files to and from the server was incredibly slow. People say that samba performance on BSD is slow.
I have thought about Windows Server 2003 or 2008 as power consumption might be a little better. The only reason why I've stayed away is system crashes on my workstation that would necessitate a rebuild/verify of the RAID volume, which is why this whole exercise started to begin with. I suppose...
I just checked and the value is 200000. Thanks for the tip.
As for OpenSolaris, I was using ZFS. I asked on the ZFS forums and OpenSolaris forums and was greeted with a bunch of replies insulting me for spending $$$$ on a hardware RAID card because the best is to use either the motherboard...
Thanks for the advice, guys. Sadly, I searched and searched and it doesn't appear to be easy on OpenSolaris. Solaris...yes, just not OpenSolaris. I already installed Ubuntu desktop and am giving it a whirl. Samba performance is pretty good and I managed to run SqueezeCenter on the new server...
Hi guys,
I'm trying to build a file server and settle on a OS. I have a 3ware 9650SE-16 port controller currently connected to four 2TB WD enterprise drives. I'm nowhere near the capacity that the new file server will offer and want to put off purchasing drives until I need them (the drives...