Search results

Yeah I think that would probably work. But I don't think its a viable solution. Why should I have to spend more money just to get the USB ports to work properly? Isn't there any other thing I can do? Cheers ;)

Hey guys! I recently purchased a set of Razer Megalodons. My OS is Windows 7 Ultimate X64. My motherboard is an Asus P8P67M-PRO REV3.0. The problem I’m having is that the Razer Megalodons generate a lot of USB conflicts I think. When I first connected them they did not play sound at all...

I love the way XFX PSU's are too sexy for my shirt

Yeah, performance may vary. But, in the end, it's practically the same. And, since I already had these two 120mm Black Ice rads layng around I thought I would use them. And the space between them really came in helpful when it was time to hide some cables, and it doesn't affect the airflow.

(It reads: "bend down") I'm sorry but this is all I have, I lost all my cad files a while ago, along with some other things when my usb pendrive broke... I'm sure that if you take this image as a sketch and also your case to any competent laser cutting company they can measure and make an...

This is my rig, it's a Lian Li PC-V350. The end :D

thanks man! CPU's running at 4.5Ghz, at a stable temperature (less than 70ºC under full load)

Hey guys! Just thought I'd introduce my, I might say, pretty darn modified PC350! I wanted to keep the outside appearance as close to the original as possible, becasue that's one of the biggest reasons why I lose this case so much. And I also wanted to fit 3 120mm radiators, a reservoir, a...

Bump!

No, I made 4 holes at the top of the case to screw in the HDD cage (With a silicone membrane between the cage and the case to prevent vibration. If I need to take a HDD off I can just take the whole cage out rather easily. But I'm also thinking on adapting a latch system. I have one for...

Hey guys! Some pics of my current worklog: Had to push the front fan bracket forward a bid so it would fit a rad, a fan, and my 4870X2. Now it fits perfect Front fan bracket fully cut to fit the rads (the right one is missing) New backplate Vent holes New HDD Cage...

Hey! Have you guys had any luck finding a good Full-block solution to watercool the Gene? I'm thinking on ordering a Mips set like this one, but a one block solution would be much better IMO. What do you make of it?

Yeah thanks for your help! I'm not thinking on mounting my rad on the intake fans firstly because that would mean that the intake air would already be warm, and I don't want that. Secondly because there simply isnt enough space left over from my VGA, a 4870X2. So I was thinking on mounting...

Dang... I just might sell it to get a smaller but still modular one... Or.... Fire up the Dremel!! :D:D

Hey guys, I'm thinking on getting this case, how does it handle Full lenght PSUs? Like the Corsair Galaxy? And when installing a big VGA like the HD 4870X2, is there still room in the from for a small radiator? Thanks a bunch!

That becomes too expensive considering the shipping and duties I have to pay to get them in Portugal. If it's the MixAmp + A40s then it would be a good deal, otherwise I can get the other two in my country.

None of those is available where I live, and I would only import the Astro's. The choice is definitely narrowed down to either one of the three I posted, I just need to chose which one.

Hey everyone! I'm thinking of getting a brand new pair of headphones for Chrismas, my last pair were the Razer Barracudas 5.1 which I hated. The sound was bad, the 5.1 system was flawed and the whole headset was too uncomfortable to use for longer than an hour. So I decided on getting a 2.0...

Thanks a lot mate!

This is NOT a High-Flux system, my tubing is around 1.2cm wide (Less than half an inch). ATM I have 3 rads and the flow is around 160l/h., but my Laing DDC-Pro isn't even trying, I have it set to Silent mode though an Aquacomputer Poweradjust, I think it will easily maintain that flow. ;)

Hey guys, Currently I have 3 120mm Rads cooling down the water that runs thourgh my Watercooling loop. For now it's cooling down a Q6600 and a 8800 Ultra. But I want to add Chipset cooling too and to get the temperature down a bit, so I was thinking on adding ANOTHER 120mm Radiator. I made a...

Quote quote quote... Answer answer answer... :eek: I really need an answer

Hey guys! Does anyone know how to FLIP the HDD Cages so the conectores face the other side? I've seen it somewhere but I can't quite figure out where. Thanks ;)

External cooling sucks. It looks ugly.

They are doing the "Shower Efect". This way the water is spreaded equaly amoung all fins on the block. It's great for low flow systems.

Hey guys! I got a hold of an 1.8 inch Toshiba MK4004GAH 40GB Hard Drive. And I need a small and sleek enclosure to put it in and for it to work as my private and portable Hard Drive. Problem is, I don't even know where to look for it, so I wanted some advice on some of the models available...

Yeah, its a Black Ice GTS Lite 120 on the back, and two Black Ice GT Stealth 120 (133mm wide) on top. For the top radiators it required very little modding, you have to take the two top mounts and break a little bit of plastic there, where a 35mm screw will eventually pass through. Then you...

Just checking in. I did buy the TJ09, and manage to fit a Black Ice Radiator on the back, want to see? ....Yeah... I'm showin' off :p What do you guys think? right choice?:D

HP managed to get that license with the Voodoo Blackbird. They are setting up systems with the same X38 motherboard, but you can choose from Crossfire or SLI. If the drivers / BIOSs that allow this are to become available online... yupi! :eek:

Why would a reference board be superior to an Abit board? Even in therms of assistance and support, I think I can expect better things from the Abit no?

Yeah I understand. But there's a small problem. I bought my P5K Premium at an Online Store. This store allowed me to choose another motherboard from they're inventory. They don't have the eVGA A1 there, only the IN9 32X MAX, BFG nFORCE 680i SLI, DFI LANPARTY UT NF680i LT SLI-T2R, or the XFX...

Yeah it would be... But it's two months away, that's a long time to wait. How does that EVGA A1 work with 4GB of RAM, good? Is it better than the Abit IN9?

Hey guys. I have 4GB of Corsair Dominator PC2-6400 RAM (4 x 1GB). And I'm going to buy an Abit IN9 32X MAX for them, my Q6600, and my 8800 Ultra. Will this config work flawlessly?

I think I'm going with an Abit IN9 32X MAX, what do you guys think?

So now I'm confused. Let's divide it into three parts: If I should go with a 680i motherboard, would a eVGA nForce 680i A1 be a good motherboard? Or should I choose a more expensive and stable one like the Abit IN9 32X MAX? If I should go with a P35 motherboard, would the Abit IP35 PRO be...

What do you think of the ABIT IN9 32X-MAX? Seams pretty solid and performant to me.

Yeap. I'll probably go with the IP35 PRO or the DQ6. About X38, will my 700USD 8800 Ultra even be compatible with PCI-E2?? What about my RAM? If most of them are DDR3 exclusive what would I do? Is X38 REALLY the way to go? Or should I get a 200USD IP35PRO, or a slightly more expensive...

Also, whats the big advantage of the X38 over the P35?

Hey guys! Recently I bought a P5K Premium. Top of the line Asus P35 motherboard, killer looks, killer performance, hard drive killer. RAID does not work, the hard drives that in fact work are at a 4MB/s transfer rate. I also have 4GB of Corsair Dominator RAM ( 4 x 1024MB) and the motherboard...

Yeah :( I asked the guys @ the online store where I bought my PC to try one on and it doesn't fit. I just ordered a Black Ice GTS Lite which is exactly 120mm wide, so it won't have any trouble fitting there. :p