Hey guys, looking to get some help in regards to display driver issues with my GTX460. Recently, I started experiencing an issue where my display would flash and black out, and then either return back to windows, or, bsod. I receive the "Display Driver stopped responding and has recovered" error...
It's become a tad annoying as the backside of my case is hard to access. Hopefully they can provide me with a replacement panel - perhaps even an additional 3.0 port in place of the 2.0. :p
Hey guys,
I've been running into some issues with the top USB panel (2 x USB 2.0, 1 USB 3.0) on my Fractal Define R3 as of late. Unfortunately, the two USB 2.0 ports have suddenly stopped working. When I plug any device into either one, the device is not recognized. However, if I plug that...
Those temperatures look normal to me, at least the idle temps. Prime 95 figures don't look so bad. What sort of cooler you using?
In comparison, I've been getting 50*C idle after switching my case to a Fractal Define R3 (using a Corsair A50 cooler). Was getting low 30s with my Thermaltake...
I am willing to sacrifice some silence for improved cpu cooling. The temperature readings that I am currently getting at stock seem to be numbers most people are getting at slight overclocks on the 3770K. Ie. I am currently sitting at 51*C at idle which I would think is a little warm. This...
I added two fans to the stock case, for a total of 4. 2 intakes in the front, an exhaust out the back, and an exhaust out of the top. I don't think the video card runs too hot (GTX460).
Looking at Real Temp in the second screenshot, Min is 43*C while Max is 82*C. This is up from a Min of 36*C and Max of 74*C using the old Thermaltake case.
Hi guys, I have a quick question regarding cooling for my new upgrade. A couple weeks back I decided to upgrade to an IB 3770K (Asus P8Z77-V Pro, 16GB Kingston HyperX 1600), while reusing my Corsair A50 cpu cooler, and Thermaltake Armour Jr. Few days ago I decided its time for the Armour Jr to...
Hi guys,
I recently upgraded my computer to the new Intel chips (including mobo), and have been having some issues regarding audio. In particular, I am having issues with the Realtek HD Audio Manager software on my Asus P8Z77 mobo. For some reason, unlike older versions of Realtek HD Audio...
Ran a quick burn test. Runs a little hot especially for stock speeds, but again, I think I should probably upgrade my A50. Here are my results:
My linepack output speed is almost half of what others' results show. Is this normal?
Just got my 3770K up and running. Significant difference coming from an E6400. Plan to do some tweaking and run some tests later today.
Intel Core i7 3770K
Asus P8Z77-V Pro
16GB Kingston HyperX 1600
Enermax Liberty 500
Corsair A50 CPU Cooler (Should probably look to upgrade this)
How do my...
Hey guys, I need some help trouble shooting my desktop. Its running an Asus P5W Deluxe mobo, 2X 1GB OCZ, Enermax Liberty 500, Intel E6400 with an OCZ cooler. Ive been hearing some noise coming from either the cpu or gpu fan, so I decided to fiddle around with the computer last night, trying to...
Hey guys,
I am running Windows XP Pro on my PC, Windows Vista on my laptop, and seem to be having issues regarding file sharing. File sharing has worked in the past, however I am having trouble after some recent changes. Both computers are on the same network. I have installed LTTD on the Xp...
So I deleted the partion, and used a quick format. Tryed booting up using the XP disc, and still...same thing. Maybe do a full format of the drive again? :S
I also went went into the BIOS,and all I see is the drive shows up as Third Master when its connected. Under the IDE configuration menu...
Alright, so I finished formating the SATA drive, and now I'm left with two formated partitions. I disconnected the IDE drive, and connected the SATA in the first SATA port. I tryed booting once again from CD, and again, black screen after Setup loads up the files. Any ideas? Maybe delete the...
The problem was that I cannot boot up using the XP disc when the SATA drive was connected as a Primary drive. So what I decided to do was add another HD, install XP on that, and use it to boot up into Windows. The SATA drive I connected as a Slave, and once I trasfer all the data off of it, I'll...
Transfering data atm..Should take quite some time :p. Once thats complete, Im guessing I should just format the second partition of my SATA drive aswell. Would it be okay to leave the drive still partitioned, or would it be better to make it one big partition again - before trying to install...
Im trying to backup everything from the SATA, but only problem is I can't boot into windows using the IDE. I can get into windows when only the IDE drive is connected, but once I put the SATA in as well, it just goes to a blank black screen- Doesn't load Windows. Hopefully I can get that going...
Im trying to install Windows XP. This is what I have done so far. I decided to take a extra WD IDE Drive that Ive got lying around, and put it in the computer instead of the SATA one. I was able to install XP on it without any problems. I then reconnected my SATA one, and using the Drive...
Hey guys, I need some help regarding a windows installation. Im trying to re-install windows on a WD HD, which already has Windows XP installed on it. Im booting from my CD-ROM, and have problems during the Setup. Once the setup completes loading installation files, all I get is a blank black...
Yeah I took a look at those guides..this one specifically:
http://www.xtremesystems.org/forums/showthread.php?t=106563
But Im really not comfortable doing all that stuff just yet. I just posted to check if the temperatures I'm getting are acceptable before I do anything like reapplying the...
Hey guys, gotta quick question for you. I recently just opened up PC Probe (Asus Software), and got a warning about my MB temperature. Looking at the temperature that PC Probe is showing me, it says its 45C. My question is, is it okay for this board to run this hot? Ive had others tell me that...
Hahaha...problem! Alright, so I partitioned my harddrive about two days ago with Partition Magic, and everything worked fine. I could restart and boot up the PC without any problems. This seemed to work for about 2 days. Today however, I try to start up my computer, and it wont boot up. It seems...