Search results

^^^^^^^^^^

any ideas???

Dea All, I would like to be able to sne dfiles to print to my rpinter rom around the house. I require to be able to print from 1 * Desktop PC 2 * Laptop I undersatnd most people use a wireless netwrok to do this, howevevr, this is not viable for me as one of the laptops has enhanced...

Sorry. Just got some other wire tidy thing. Im gonna set up webcam tthen post a pic. Thanks for all the replies. i really appreciate it. in a bi ;) t...

Hi all, Could you suggest an effective way of tiding up wires inside a case At the moment im using some akasa cable tidy kit, but the case still looks a mess and I think it may be limiting air flow! Thanks in Advance!

just 1 quik question, as Im new to OCIng and havent heard of underCIng. Why would anyone want to overclock. Probably, a really stupid question, but just curious. Thnanks

So would you suggest lowering the multiplier lower than 10x, and increasing the fsb. Thanks :confused:

Lol, maybe ill improve in that sector. Thanks for ally our help guys...really appreciate it. ;)

Soi i havent done too badly for a first time OC? :confused:

QUOTE]Stupid questions are ones you don't ask! Thanks, your help is really appreciated. I really do thank you for giving up your time to help me! Just one last question, on CPUZ, when I go onto the memory tab, it r4ecords my memory as dual. BUT, when I got to the SPD tab, my memory...

Thanks - i wil use memtest, but thats after im logged into windows sin't "don't boot into windows with a potentially unstable config " and how should i identify potentially dangerous... Eagerly waiting your response. Thanks ;)

Oh now i get it....Thanks for all your help. So at the speed im running could i tighten any timingd any more. Thanks

I see.. Is it undeclocking or damageful or bad ot run memory under rated speed? What is the difference between DDRxxx and PCxxxx? What DDRxxx am i running at???? Sorry if these sound a bit stupid! Thanks

oh i see. Thank you very much for the fast response. So what is the difference between DDRxxx and PCxxxx. What DDRxxx am i running at Sorry if these sound a bit stupid! Thanks

Hello all, :confused: I have GeIL 1GB (2x512MB) PC4400 UltraX-TCCD CAS2.5 Ram, and on my Asus mobo have set the Meclock timing to 400Mhz which I think i equivalent to a 1:1 FSB:Dram ratio. It is at 2.5-3-3-7 My CPU is running at 267Mhz with 10x multiplier, and my ram running at the same...

Hello all, :confused: I have GeIL 1GB (2x512MB) PC4400 UltraX-TCCD CAS2.5 Ram, and on my Asus mobo have set the Meclock timing to 400Mhz which I think i equivalent to a 1:1 FSB:Dram ratio. It is at 2.5-3-3-7 My CPU is running at 267Mhz with 10x multiplier, and my ram running at the same...

Wow - could you tell me your settings, and anyone else. im dyin to try it out. Thanks

wel, i dunno - but sometimes when your tryin to work, it gets really annoying. Does lowering the fan spped make much of a diferecne to the temp. Thanks ;) :confused:

i have the Akasa AK-913 EVO 33 Direct HeatPipe Copper. Im about 36-37*c idle and 40-45*C full load Is that OK, or too hot? That is with the fan on full, as the controller currently does not work! If i lower it, how much do you rekon itll go up by Thanks

on stock

So what is a golden chip on Stock then? Thanks

Oh Sorry I see -when is it regarded as a Golden Chip on STOCK VOLTAGE

Hi all, i was just wondering is this is a good OC on STOCK VOLTAGE and Air COOLING I have got my AMD 3700+ San Diego to 2.67Ghz stable with 267*10 Mem timings are standar for mt Ram 2.5-4-4-7 Is this a good OC on stock voltage How high will I be able to get if i Incraese the...

Thanks will do so, and post back in abit thanks

Will do so and post back. What voltage should i put the ram on. The Geil say 1.95V max, and I have it on 1.85v - should I go any lower. Thanks

I have done following Cas=3 Trcd=3 Trp=3 Tras=8 I have just tested the memclock at 400Mhz. It is at 2.7Ghz, and the Ddr voltage is at 1.85V It i stable with memtest and OCCT Do you think it is possible for me to lower the Ddr voltage any more, or tighten any of the timings...

I had the same dilemma as you when i built my pc 2months ago. I think that you should download all the software, such as PRIME95 and memtest and perhapes read a few guides on OCIng, and then go for it. hope this helps.

My CPU was stable when I put a 1:2 divider on my ram "200Mhz memclock". The settings were HTT=270 Ht Mutli=3x HT Multiplier=10x I ran OCCT and it was stable I was told that I need to adjust settings Here are my me settigns Min RAS# active time (Tras) 5T Ras# to Cas# delay...

I have tried the drop the HT link to 3x so the settings were htt=270 multiplier=10x and ht multipier=3x occt=not stable prime95=rouning error, 0.4 epected 0.5. I can get a stable overclock at htt=265 multiplier=10x ht multiplier=4x and an unstable at either htt=270...

no....i dont want to raise the voltage I have changed the oC a bit "i have overclocked my 3700+ from 2.2Ghz to 2.65Ghz. I have used: HTT=265 Multiplier=10x HT Multiplier=4x The question i have is that when i run occt or prime 95 at HTT=270, it is unstable - although in all the...

Hello all, i have overclocked my 3700+ from 2.2Ghz to 2.65Ghz. I have used: HTT=265 Multiplier=10x HT Multiplier=4x The question i have is that when i run occt or prime 95 at HTT=270, it is unstable - although in all the tasks I do it is fine. I understand taht prime95 shows...

Thanks I currently have overclocked it using following HT Multiplier=4x Multiplier=10x HTT=270 What do you reckon i should lower it to thanks

any ideas anyone thanks

Does this mean the FSB:DRAM ration is 1:1 or 1:11. Thanks very much http://www.overclock.net/attachments/amd-cpus/16351-cpu-z-print-screen-question-memory-2211.bmp?d=1133910525

i have thje geil ultra-x pc3200/pc4400 ram which can handel it is it cos i possibly iunknowingly changed the ram divider. how do i revert this i have reverted allk stnadard default settings in bios...should this have solved it

i am using cpuid, and i get the CPU/`11...is that even possible

the problem is that I am getting the FSB:DRAM ration to be - CPU/11. It should be 1:1 Cos my fsb is 201 and so is the ram. It says some frequency is running at 270 though. Why is it CPU/11...is that even possible. i have restored all details to standard on bios. Could it be a...

The rpoblem is that the FSB:DRAM ration is not 1:1. I have being a bit for eading, you want to raise your FSB to a higher speed than your RAM supports, you have the option of running your RAM at a lower speed than your FSB. So if my FSB is at 200, and my ram is at 201, should i not have 1:1.

i will do so. But primarily, i want to get the FSB:DRAM ratio back to CPU/1....was it evr like that. the CPU multiplier is at 200Mhz, the HT Multiplier is at AUTO, and the Multiplier is at 11*. All standard features. Have I done any permanent damage. thanks

Hello all, I AM IN UTTER CONFUSION As from my last post"I have an AMD 64bit 3700+ San Diego. It has been overclocked from 2.2Ghz - 2.7Ghz. The HT Multiplier is at 4x and the multipier the same. I have just increased the fsb. The voltage is at stock. The idle temp is 33*c. The problem I...