Search results

Well I did the voltage thing, didn't help at all. still wouldn't POSt when I put the second stick in. I switched out the heatsink for the one that came with the processor, everything botted up fine but temps were extremly high. They were like 45 idle and as soon as the processor got up to...

Im using Catalyst 9.7, and I am pretty sure it is a memory problem, since I can boot and run programs at 100% load fine when I am at 2gb, but when I stick the other stick in it freezes up or just doesn't boot at all.

my RAM does have heatspreaders, I got the OCZ reaper ones. There isn't a way to get to my BIOS but now that I can actually start my computer I will bump up the voltage, I have not changed a thing in the bios. And I was trying in both pink ones since I was not able to get to the blue ones.

WellI got that new power supply today. Hooked it all up, thought It was working great. 40min into OCCT, freezes up on me again. I had to hold in the power button to get the computer to go off, then when I tried to start it up again, fans would spin-up, stop, then spin-up and would go in a...

I have 5 drives all together.

I answered that in post 6, no it doesn't.

Alright, so I am running memtest, there has been 1 pass, no errors on the memory. so its the PSU, which PSU would you guys recommend? I was looking at the Corsair 750HX or the PC Power and Cooling Silencer 750W. I love the 620HX which I why I looked at the Corsair one, and I love the...

lt_shiro, I took out one of the 4890s and it is went though OCCT without freezing up. Markyip1 I am not overclocking, RAM is not running at the rated speeds. I bought PC3 12800, but according to CPU-Z it is running at 533 mhz, which to my understanding is below what it shoujld be. I have...

In the bios, I have the Primary Graphics Adapter set to PCI-E.

I just built a new computer last night with the following components: MSI 790GX-G65 Motherboard AMD Athlon Phenom II x4 945 2 Raedon 4890s in Crossfire 4gb OCZ Reaper DDR3 Ram And then took all the drives and PSU from my old build, PSU is an HX620. I installed Windows 7 and have been...

One last question, I am using a Thermalright Ultra 120 Heatsink for my Q6600, will I be fine using that on the 945 too? I would just order the AM2 bolt through kit, I read that AM2 and AM3 uses the same mounting holes, is that true?

That one was supposed to be for the 8800GTX, 4gb RAM and a Q6600. Ill be using the HX620 4890 crossfire.

The Antec Earthwatts 430W

Whoops sorry, missed that. So that would leave this settup: GIGABYTE GA-MA790X-UD4P 1. AMD Phenom II X4 945 Deneb 3.0GHz Socket AM3 2. HIS H489FT1GP Radeon HD 4890 1GB 256-bit GDDR5 PCI Express 2.0 x16 HIS H489FT1GP Radeon HD 4890 1GB 256-bit GDDR5 PCI Express 2.0 x16 For a power...

What mobo would you recommend if I wanted to go crossfire? Also how much of an increase would I get running 4890's in crossfire vs running a single 4870x2?

I am thinking of going with that first combo that Hardware Guru posted, the 945 and Asus 770 mobo. For a video card I would go with 2 of the HIS 4890 video cards. Would my HX620 power supply be able to handel all of this? Or should I get a more powerful power supply? Also what kind of HSF...

I am just doing PHP stuff for myself. I am going to school for an Management of Computer Systems degree and that is mostly JAVA stuff. I do not run any VM's or anything.

As far as I know it is. I have no way of testing it though. I would like to upgrade anyway and like I said, give some parts to my dad to help him out.

I was mainly just planning on upgrading the CPU, mobo and video card. If I were to give my old parts to my dad then I would get some new memory too.

So my motherboard just died, and I figured this as an excuse for an upgrade. My previous machine was built 2 years ago, right after the Quad Core price drop. The machine was this: Gigabyte P35C-DS3R EVGA 8800GTX Intel Quad Core Q6600 B3 stepping 2x2gb Patriot PC6400 RAM Corsair HX620...

Hey, I am trying to make a calendar and was going off of this, http://www.evolt.org/quick_calendar_using_ajax_and_php Right now, I have the calendar being displayed properly for the month, what I am having problems with is understanding the AJAX part. I am not sure where I am supposed to...

Alright, how do I check the channel they are currently trying to connect too? Also I read online that XP Home (which I believe both are using) have trouble connecting to corporate grade networks. Could this be causing a problem? I read that on my colleges Requirements to connect to the...

There are four people from France that are living in my dorm hall. For some reason, all but one of their computers are unable to find the college network via WiFi. The one that was working was using Vista and then one that wasn't working was using Vista also. Then the other two are both on...

Just bought this case at the Madison, WI west side store. Marked at 78, got it price matched to 53. East side had it for 53. There were quite a few stores in Wisconsin with the 48, the only one I actually saw the city for was La Crosse.

yeah

Well just for an update. I took out the motherboard and ran it outside the box, everything worked good. It booted up right away, speaker was working again. hard drives all recognized. So I believe it had to do with the screws or something like that.

I tried resetting the CMOS. That didn't work. I let it sit all night long hoping for it to dry. I tried to pull out the CMOS battery but I couldn't figure out how to remove that.

alright thats what I thought was the problem. What type of motherboard would I need so I don't have to reinstall Linux. I have tons of recordings I do not want to lose. Do I need another A8N-SLI Deluxe or can I do with any Nforce 4 SLI chipset?

Tried another PSU, same thing happened. the only thing I can think of that happened was that some water dripped onto the motherboard and I did not realize it. But I have no clue how I would be able to test for that.

I am running Linux on my old machine, using it as a PVR. My specs are as follows: Asus A8N-SLI Deluxe AMD Athlon 64 3000+ 1.3tb HD Space MSI Nvidia 6800NU Antec TruPower 550W PVR-150 Tuner. 1.5gb Mushkin PC3200 Memory I have the processor watercooled and when I got home today I...

Ok got it to work...nevermind

I just tried a friends 580 watt powersupply and jumpstarting it fans spin up and everything. ONce i connect it to the computer fan's spin up and then shut off right away. edit: sorry for the multiple posts. also I just tested my Hx620 again and now the fan is working without a problem.

alright now I am thinking it is the power supply. Most likely it is, I decided to jumpstart the powersupply just to see if the fan spins and it just happens to start up and then shut off and it would attempt to restart. So I am guessing this is a power supply issue now and not a mobo. I will...

What I did before was take this one and just disconnected the 24pin power and 4 pin CPU and plugged it into a different machine and the machine booted up just fine. I did this due to the fact that it is much easier than having to redo the other machines wires. When I took everything out the...

Well I have concluded that it is not the power supply. I switched out the powersupply and tested it in another computer and that all worked fine. When I went to the bare components (Mobo, CPU, Memory and Video) there is no boot. When I remove the video there is no boot and there is a very...

I leave my computer on 24/7 and when I woke up today I went to my computer and noticed that it would not go to the desktop, so I reset the computer and only the fans would spin up and then shut off again, there are no beeps, there is nothing on the screen the only thing I get is the fans...

Thanks, thats what it needed.

I am trying to create a registration page for a website and if something is not filled in correctly it would pop up a alert box with all the errors on its own line, the only problem is I cannot get it to display the errors correctly. Here is the Javascript Alert box part: <?php if...

Well I found out that the noise I was hearing was the PSU, I unplugged the PSU and used me old Antec 550 Watt Truepower and the noise went away, however when I set the FSB to 280 the fans would start up and then restart. Same thing would happen again and then the settings were reset to the...

yea so I updated the bios to F4 and it still happens.