Search results

  1. B

    benchmarked twin 6800's-bonestock

    Alright, I just checked my aquamark again and got a 70843 with the new 76.44 drivers. By the way that's stock GPU timings of 370 and 1.0. My GFX are 9996 and CPU are 12155 That's why I think you are CPU limited. Do you have all the latest drivers? Sounds like a motherboard or a driver...
  2. B

    benchmarked twin 6800's-bonestock

    I have one BFG 6800 GT OC and my best score is 69900. I'm not sold. You might be CPU limited.
  3. B

    What fan to look for on the BFG 6800 GT OC?

    I would personally rather have the single-fan unit.
  4. B

    What fan to look for on the BFG 6800 GT OC?

    BFG told me that the single-fan units were used because the twin-fan heat-sinks were not finished in time when they sold the first cards. I wouldn't know which one is better for heat, but my card is RMA right now because one of the pretty, blue fans busted in half.
  5. B

    What is your BEST Winchester 3000+ OC?

    I run my 3000+ at 280x9 with memory also at 280. It runs stable in all of my games and applications. I use RM Clock which drops the cpu multiplier to 5x when idle. That drops the idle temps anywhere from 28C to 33C. Load is 50C to 55C. Memory timings are 2.5, 3, 3, 10, 1T
  6. B

    Post your Geforce 6 Series temps!

    Your probably right but I think everyone is worrying too much. These cards just run hot. If they aren't being damaged by the heat then there is no problem.
  7. B

    Post your Geforce 6 Series temps!

    I talked to a BFG tech guy last night and this is what he said about my 6800 GT OC. The accepted temps are: idle: 10C above your CPU temp. load: 30C above your CPU temp. He said that if your CPU is running at 60C then 90C load is just fine. He said 90C load is nothing to worry about...
  8. B

    Post your Geforce 6 Series temps!

    Card: BFG Geforce 6800GT OC Cooling : Stock Drivers: 76.10 Guru3d Clocks: 370mhz core/ 1.0 Ghz mem Stock Temp idle: 58C gpu Temp load: 91C gpu Should I be worried? 91C when I'm playing Far Cry. I think I might be under powering the card. Riva tuner monitoring says i'm running on the...
  9. B

    winchester overclock database

    ADA3000DIK4BI CBBHD 0449 GPBW I run at 266x9 with the memory also at 266. Runs great. Aquamark3 is at 65000 and PCMark04 is at 4800.
  10. B

    MSI K8N Neo2, CPU Fan Control Software?????

    Hello, I have a Neo2 board with a 3000+ Winchester. I want to get fan control similar to the MSI's core center software for Cool&Quiet. I have tried SpeedFan software but I can't get it to automatically control the CPU fan. What are my options for fan control? Thanks PS, I use a...
  11. B

    MSI K8N Neo2, CPU Fan Control Software????

    Hello, I have a Neo2 board with a 3000+ Winchester. I want to get fan control similar to the MSI's core center software for Cool&Quiet. I have tried SpeedFan software but I can't get it to automatically control the CPU fan. What are my options for fan control? Thanks PS, I use a...
  12. B

    what is stock voltage for 3200 winchester?

    1.40-1.45 V is the accepted range for Winchesters. My Neo2 board undervolts a little at 1.38V. I increased the voltage to 1.45 and my temperatures went down a good 7 degrees C. At 1.38V I was idling at 40C, at 1.45V I idle at 33C.
  13. B

    Good OCing mobo for 3000+ 64 winnie

    I use the MSI K8N Neo2. My 3000+ can hit 280ish and benchmark fine. It is absolutely stable at 260-270FSB with 9x multiplier. That's 1:1 with memory. I use 2x512 OCZ el plat 2 sticks at 2.5, 4, 4, 10, 1T. The memory will go past 290+ no problem. That's at 1.45 CPU Volts and 2.7 V memory...
  14. B

    What could i expect out of a 939 3000+

    Here's what I have: ADA3000DIK4BI CBBHD 0449 GPBW MSI K8N NEO2 I'm able to run completely stable at 267x9, 1:1 with memory. Prime95 stable for over 8 hours(I stopped it). It runs idle at 33 deg C and loads around 50-54 deg C. Windows will boot with it at 290x9 but isn't very stable...
  15. B

    WTB: 9600xt or better for $100-130 including shipping

    personal message sent. Thanks.
  16. B

    MSI K8N Neo2 Problem

    I have the same setup as you: Neo2, Winnie 3000+, OCZ Plat 2(1Gb), BFG 6800 GT OC. except I have a 425W Enermax Noisetaker PSU. I have changed components and wires around and have never had that problem. Sounds like a bad PSU to me. Hope that helps.....
  17. B

    Recommended Voltage? 6800 GT OC

    Well, I definitely don't want to damage my board. I was mainly wanting to see if the voltage was at the right spec. I'll leave it on auto. Does anybody know how to find the current voltage? Is there a utility that will tell me this? Also, what is the right voltage to run to a 6800 GT OC?
  18. B

    Recommended Voltage? 6800 GT OC

    What is the recommended voltage for my AGP? I have a few different options in my bios. I have a MSI K8N NEO2. Right now I have it set on Auto. How do I find out what voltage I'm actually running? Software? Thanks
  19. B

    New 6800GT OC, HL2 pauses constantly!

    Thanks for the help guys. Before I tell you what fixed it, I have to settle the bet. It was NOT autosave. Remember I said it was every couple of minutes, sometime more often? That's why it wasn't autosave. Anyways.... I called BFG techline(24/7). First thing he said was to turn off fast...
  20. B

    New 6800GT OC, HL2 pauses constantly!

    I'll try the coolbits thing tonight. I have a Enermax Noisetaker 425W power supply. It should keep up fine.
  21. B

    New 6800GT OC, HL2 pauses constantly!

    I'll check out the update thing. Thanks.
  22. B

    New 6800GT OC, HL2 pauses constantly!

    It is the overclocked version at 370. This is wierd because I get around 65000 in aquamark and PC Mark 04 is around 5000 with no lockups. It also does excellent in Doom3. I have the retail version of HF2. It's not autosave because it happens kind of random every couple minutes and I have...
  23. B

    New 6800GT OC, HL2 pauses constantly!

    Hello, I have a problem with HalfLife2 pausing when I play. It will pause for 5-10 seconds and will loop the sound until it "unlocks". It will do this every couple minutes of play. Doom3 runs perfect at max resolution. I had a ATI 9600XT before and it never did this. The new card is...
Back
Top