Does "quality" upscaling to 4K (dlss, fsr) look better than native 1440?

nullptr69

n00b
Joined
Nov 5, 2026
Messages
63
I am using an Odyssey G9 w/ 7900xtx. It is a 32:9 1440 monitor. Looks great at normal gaming distance of 30-36". However at closer distances (productivity) it is not ideal.

Considering upgrading to a 5K2K monitor for text clarity, but it may also look better in gaming?

In the image below, it shows the render resolutions for different levels of upscaling. Apparently, quality mode on a 4K is rendered at 1440. I am assuming that on a 5K2K display, that quality would have native resolution of 3440x1440. Which I know my gpu can render. In fact, this is less intensive than the normal 5120x1440 native that I usually run.

So the question, does 1440 upscaled to 4K look better than native 1440? I would assume yes.

Also, because my 7900xtx hasn't run into any problems running 5120x1440, (yet alone 3440x1440), is it a safe assumption that I will be able to use fsr4 quality on a 5K2K display, for any game that the 7900xtx is able to natively render at 3440x1440, and have a framerate roughly equivalent to what I would get on 3440x1440?


1794944511296.png
 
To me? Yes. I'd much rather run 4k at quality than 1440p at native. Now of course it is hard to do a complete apples-to-apples comparison, like 4k at 32" vs 1440p at 27" or whatever. However all things equal I'd rather have a higher rez display with more upscaling than lower rez native.

However something to note: It isn't as fast as native rendering, there's overhead from the upscaling. So like if you had a card/game/monitor combo that ran a game at say, 90fps at 2560x1440 native, then you switched to 4k quality upscaling, which is 2560x1440 rendering, you might only see 80 or 75fps or something (I don't know the precise overhead). So if your card is borderline at the rez you are running at and getting you enough fps, but just barely, you'll find that with upscaling it won't be enough anymore unless you run a higher amount of upscaling.

Howeverhowever, the higher your output resolution, the better upscaling works, so you can do more of it. At 5k2k, performance upscaling will work pretty well. Basically how good upscaling works is a function of its input resolution, and the higher the output the higher the input. So like performance at 1080p tends to kinda suck, even with the modern algorithms (though it has gotten better) because the input resolution is only 960x540, barely more than SD. At 4k the input resolution is 1920x1080 and performance upscaling works pretty damn good. At 5k2k, it'll work even better. So you can crank down the upscaling and still get good results.

Howeverhoweverhowever, you are using an AMD card. For that, this only applies to games that support FSR 4/4.1. FSR 3 and older are pretty garbage and even quality upscaling isn't all that great, and performance is basically unusable. So check the games you play to make sure that they either support FSR 4 themselves, or can be overridden to support it. If they are using FSR 2/3, then anything lower than quality won't give good results and even quality may not be great.
 
To me? Yes. I'd much rather run 4k at quality than 1440p at native. Now of course it is hard to do a complete apples-to-apples comparison, like 4k at 32" vs 1440p at 27" or whatever. However all things equal I'd rather have a higher rez display with more upscaling than lower rez native.

However something to note: It isn't as fast as native rendering, there's overhead from the upscaling. So like if you had a card/game/monitor combo that ran a game at say, 90fps at 2560x1440 native, then you switched to 4k quality upscaling, which is 2560x1440 rendering, you might only see 80 or 75fps or something (I don't know the precise overhead). So if your card is borderline at the rez you are running at and getting you enough fps, but just barely, you'll find that with upscaling it won't be enough anymore unless you run a higher amount of upscaling.

Howeverhowever, the higher your output resolution, the better upscaling works, so you can do more of it. At 5k2k, performance upscaling will work pretty well. Basically how good upscaling works is a function of its input resolution, and the higher the output the higher the input. So like performance at 1080p tends to kinda suck, even with the modern algorithms (though it has gotten better) because the input resolution is only 960x540, barely more than SD. At 4k the input resolution is 1920x1080 and performance upscaling works pretty damn good. At 5k2k, it'll work even better. So you can crank down the upscaling and still get good results.

Howeverhoweverhowever, you are using an AMD card. For that, this only applies to games that support FSR 4/4.1. FSR 3 and older are pretty garbage and even quality upscaling isn't all that great, and performance is basically unusable. So check the games you play to make sure that they either support FSR 4 themselves, or can be overridden to support it. If they are using FSR 2/3, then anything lower than quality won't give good results and even quality may not be great.
My research today led me to this. When I got my 7900xtx 3 yrs ago, fsr4 wasnt a thing.

I just bought a replacement g9 and realized that upscaling doesn't work as well on a 1440 display. The suw format has the disadvantage of being 4k worth of pixels, but only 1440 resolution.

All these upscaleing cards make 5k2k attractive. My cards int8 impl. Is also a decent bit slower, but my back of the envelope calculation, if the base game can hit 60fps at 4k, it should be 75-90fps with quality upscaling with 5k2k. Or whatever framerate it renders 21:9 1440p, about 85% of that upscaled to 4k with quality.

And of course there is always balanced, performance, and running at 4k native.

Old games that dont support fsr, probably will get manhandled by a 7900xtx.

Im going to return the g9 and get a 5k2k.
 
Old games that dont support fsr, probably will get manhandled by a 7900xtx.
There are some that are an issue. Some new games don't support FSR, just DLSS, they are rare but it does happen and you can find some not super old games that only do FSR 2, which is baked in to the executable and cant' be overridden. Just be aware that in those could be an issue. One example would be Resident Evil 4 Remake. That's from 2023 so not that long ago and it can be fairly graphically heavy. However it only supoprts FSR 2, doesn't even support DLSS. So upscaling in it isn't great, quality is MAYBE usable but that's all, nothing more. So that would be where you might hit issues. Not super common, but not unheard of.

That said, Optiscaler can often fix that shit and inject FSR 4.1. How good a job it does can vary though.

Also you have the option for games that just won't run well with scaling to just go and chunkify them. You can run that display at 2560x1080, and you can have the card do integer scaling if you like. Those will be some big pixels, but an easy to drive resolution so that's always an option for stuff that just can't be driven at 5k2k at a reasonable speed.
 
On a 4K screen, yes. DLSS Quality at 4K renders internally around 1440p, so you pay roughly the cost of native 1440p but get noticeably better fine detail, especially text and distant geometry. Native 1440p stretched onto a 4K panel always looks a bit soft.

Where upscaling falls apart is fast motion and thin stuff like fences and wires: some shimmer and ghosting, and FSR shows it more than DLSS. For competitive shooters I still run native for clarity. For everything else, upscaled 4K wins for me.
 
There are some that are an issue. Some new games don't support FSR, just DLSS, they are rare but it does happen and you can find some not super old games that only do FSR 2, which is baked in to the executable and cant' be overridden. Just be aware that in those could be an issue. One example would be Resident Evil 4 Remake. That's from 2023 so not that long ago and it can be fairly graphically heavy. However it only supoprts FSR 2, doesn't even support DLSS. So upscaling in it isn't great, quality is MAYBE usable but that's all, nothing more. So that would be where you might hit issues. Not super common, but not unheard of.

That said, Optiscaler can often fix that shit and inject FSR 4.1. How good a job it does can vary though.

Also you have the option for games that just won't run well with scaling to just go and chunkify them. You can run that display at 2560x1080, and you can have the card do integer scaling if you like. Those will be some big pixels, but an easy to drive resolution so that's always an option for stuff that just can't be driven at 5k2k at a reasonable speed.
Thanks for this. When I bought the 7900xtx, I did alot of gaming in that first year, but this past year since fsr4 became available, I really haven't done much.

Am I just imagining things, but when upscaling/frame gen was new, Hardware Unboxed was saying it wasn't good? That there was latency and other issues, and that it would never replace native? Now just a few years later, it is the pathway to making games work in all kinds of configurations.

I am excited about 5K2K because it gives so many options. I have researched it and have read that using AMD Adrenaline gives the option to run a 5K2K display in 5120x1440 (just the middle 2/3 of the screen). So pulled close, it would give the same fov and pixel count as the G9 farther away, in the instance where I need more fps in an ultrawide format. Also I believe the monitor can run in 4K with black bars on the sides, in the case I need more frames in 16:9.

I am not intending to upgrade my GPU until 2033 (decade), so this is a big decision for me. At the end of the day, this is 80/20 productivity/gaming, so the biggest benefit is higher pixel density for desktop apps. I am just hoping and praying that AAA games don't start baking ray tracing into everything, even though I suspect they will.
 
On a 4K screen, yes. DLSS Quality at 4K renders internally around 1440p, so you pay roughly the cost of native 1440p but get noticeably better fine detail, especially text and distant geometry. Native 1440p stretched onto a 4K panel always looks a bit soft.

Where upscaling falls apart is fast motion and thin stuff like fences and wires: some shimmer and ghosting, and FSR shows it more than DLSS. For competitive shooters I still run native for clarity. For everything else, upscaled 4K wins for me.
How does Balanced at 4K compare to native 1440p? I suspect it might be better in some ways because higher pixel count will still have sharper text and other things.
 
why dont you just try it on what you have now, see if youre happy with it?
That is the plan. Buying a 5K2K today and will probably return the G9 after testing both side/side. It is a big hassle though. The G9 has been great for games, but the text clarity and fringing is a bit off putting.
 
Am I just imagining things, but when upscaling/frame gen was new, Hardware Unboxed was saying it wasn't good? That there was latency and other issues, and that it would never replace native? Now just a few years later, it is the pathway to making games work in all kinds of configurations.

I don't know about HUB in particular but ya, upscaling is something that has gone from crap to amazing. When DLSS 1 first came out, it got dunked on pretty hard. Had to be trained per game and results were pretty meh. So most review places said "Pass on that shit." With DLSS 2, it got a whole lot better. Worked in all games and the quality took a big step up. It was now worth a look. As time went on they kept improving their CNN based DLSS and it kept being more and more worthwhile. By the end of the CNN era, it was pretty good and in general if you had an nVidia card it made sense to run in DLSS quality if you were running at 4k, maybe at 1440p too. Then they redid it to a transformer model and that was a major step up in visuals. This was only in January of 2025, so only like 2 years ago. Now it went from something you might do to something you almost certainly should do, and lower settings like performance got a whole hell of a lot more usable. Then a year later we get the second gen of transformer models and those are even better, now performance mode looks great at 4k.

AMD followed a similar trajectory, though behind nVidia. FSR 1 is/was pretty much trash. It's a simple spatial upscaler. Only good thing you can say about it is that because it is spatial (meaning working on the screen output only) and very simple is that you can integrate it in to any game with minimal work and low cost. It's better than bilinear upscaling, but only barely. FSR 2 is a temporal upscaler, so quite a bit better but just a lot of issues in implementation. Way too much ghosting and disocclusion to be a good idea for the most part. The kind of thing you'd want to use only if you had to. FSR 3 improved on that, but it was still way behind DLSS. Maybe as good as early CNN models, but maybe not. Potentially usable at quality, depending on how sensitive you are, basically garbage at anything lower. Then FSR 4 happens, instead of being a heuristic design like past FSRs, this is an inference design like DLSS and it is great. Quality is probably somewhere between the first and second gen DLSS transformer model which is to say really good. If a game has a bad TAA implementation, it can often look better than native rendering in quality mode, and even performance looks quite good and is quite usable. Again that only happened in the last couple years, FSR 4 came out in August of 2025.


So pretty new development all around. In terms of latency and frame time issues, those are with FSR frame generation. It has sucked the dick pretty bad since it got introduced. nVidia's frame gen actually works really well, but AMD's was a big problem. In general probably not something you wanted to use. However just recently, like last couple months, they seem to have fixed it. It isn't fixed in all games, so maybe it isn't something that can be backported, but they now have a frame gen solution that works and is useful, at least in some titles.

It has been moving fairly quickly. With where it stands now, so long as you can use one of the modern algorithms (DLSS 4/4.5 transformer or FSR 4/4.1) upscaling really makes higher resolution gaming feasible on lower end cards. It won't be as good as a higher end card with higher rendering rez, but it'll still be good. HUB has an interesting video where they show the latest models in ultra performance on Cyberpunk 2077 and you know, it is not bad. Doesn't look as good at quality or native 4k, but it is totally playable, and I'd say that if I had to choose between path tracing with ultra performance, or rasterization at native, I'd go with PT and ultra performance, it looks better over all.

These days I'd recommend cranking down the upscaling preset before reducing major quality settings to most people.

I am not intending to upgrade my GPU until 2033 (decade), so this is a big decision for me. At the end of the day, this is 80/20 productivity/gaming, so the biggest benefit is higher pixel density for desktop apps. I am just hoping and praying that AAA games don't start baking ray tracing into everything, even though I suspect they will.
They probably will with the next generation of consoles. Those are likely to be based on AMD's newer hardware which, while not a RT powerhouse like nVidia, can do RT pretty decently. So I imagine once those are out and more common, you'll start to see some games that require RT, or at the very least really don't look good without it. So you might have to get a new GPU before your 2033 date. However, that'll still be a bit. Probably won't see those consoles for at least a year or more, and unless prices chill out, I expect them to sell somewhat slowly.
 
I don't know about HUB in particular but ya, upscaling is something that has gone from crap to amazing. When DLSS 1 first came out, it got dunked on pretty hard. Had to be trained per game and results were pretty meh. So most review places said "Pass on that shit." With DLSS 2, it got a whole lot better. Worked in all games and the quality took a big step up. It was now worth a look. As time went on they kept improving their CNN based DLSS and it kept being more and more worthwhile. By the end of the CNN era, it was pretty good and in general if you had an nVidia card it made sense to run in DLSS quality if you were running at 4k, maybe at 1440p too. Then they redid it to a transformer model and that was a major step up in visuals. This was only in January of 2025, so only like 2 years ago. Now it went from something you might do to something you almost certainly should do, and lower settings like performance got a whole hell of a lot more usable. Then a year later we get the second gen of transformer models and those are even better, now performance mode looks great at 4k.

AMD followed a similar trajectory, though behind nVidia. FSR 1 is/was pretty much trash. It's a simple spatial upscaler. Only good thing you can say about it is that because it is spatial (meaning working on the screen output only) and very simple is that you can integrate it in to any game with minimal work and low cost. It's better than bilinear upscaling, but only barely. FSR 2 is a temporal upscaler, so quite a bit better but just a lot of issues in implementation. Way too much ghosting and disocclusion to be a good idea for the most part. The kind of thing you'd want to use only if you had to. FSR 3 improved on that, but it was still way behind DLSS. Maybe as good as early CNN models, but maybe not. Potentially usable at quality, depending on how sensitive you are, basically garbage at anything lower. Then FSR 4 happens, instead of being a heuristic design like past FSRs, this is an inference design like DLSS and it is great. Quality is probably somewhere between the first and second gen DLSS transformer model which is to say really good. If a game has a bad TAA implementation, it can often look better than native rendering in quality mode, and even performance looks quite good and is quite usable. Again that only happened in the last couple years, FSR 4 came out in August of 2025.


So pretty new development all around. In terms of latency and frame time issues, those are with FSR frame generation. It has sucked the dick pretty bad since it got introduced. nVidia's frame gen actually works really well, but AMD's was a big problem. In general probably not something you wanted to use. However just recently, like last couple months, they seem to have fixed it. It isn't fixed in all games, so maybe it isn't something that can be backported, but they now have a frame gen solution that works and is useful, at least in some titles.

It has been moving fairly quickly. With where it stands now, so long as you can use one of the modern algorithms (DLSS 4/4.5 transformer or FSR 4/4.1) upscaling really makes higher resolution gaming feasible on lower end cards. It won't be as good as a higher end card with higher rendering rez, but it'll still be good. HUB has an interesting video where they show the latest models in ultra performance on Cyberpunk 2077 and you know, it is not bad. Doesn't look as good at quality or native 4k, but it is totally playable, and I'd say that if I had to choose between path tracing with ultra performance, or rasterization at native, I'd go with PT and ultra performance, it looks better over all.

These days I'd recommend cranking down the upscaling preset before reducing major quality settings to most people.


They probably will with the next generation of consoles. Those are likely to be based on AMD's newer hardware which, while not a RT powerhouse like nVidia, can do RT pretty decently. So I imagine once those are out and more common, you'll start to see some games that require RT, or at the very least really don't look good without it. So you might have to get a new GPU before your 2033 date. However, that'll still be a bit. Probably won't see those consoles for at least a year or more, and unless prices chill out, I expect them to sell somewhat slowly.
The 7900xtx can do rt, but just not well. Games with minimal rt are just fine. Games where it can be turned offf are fine. But that is not all games.

With upscaling, alternate resolutions (etc, etc) the impact of having a slower card is just that you have to run a higher level of upscaling, so it ends up looking worse. I think this card will be relevant until 2033. There are tons of games from this era that I haven't played that will be on GOG a decade from now.

To give an update from another thread... I did buy the 5K2K LG 39". My hope was to have higher pixel density for productivity, and better gaming resolution, but with the testing I've done the past few hours (productivity and some games), the step up to 5K2K from 5220x1440 is a little underwhelming.

The extra pixel density doesn't translate into much for productivity. It has the same horizontal resolution, so I can move the monitor closer at same pixel density and get more height. If I don't sit that close, then I need higher scaling and lose real estate. And even with higher pixel density, the text is still a little fuzzy.

For gaming, the jump from 1440 suw was more underwhelming. It just didn't make much of a difference. I will probably return the 5K2K and keep the Odyssey G9.
 
For gaming, the jump from 1440 suw was more underwhelming. It just didn't make much of a difference. I will probably return the 5K2K and keep the Odyssey G9.
Fair enough. I'd still give upscaling a try as it works pretty good at 1440p these days.
 
Fair enough. I'd still give upscaling a try as it works pretty good at 1440p these days.
I'm sure the image can be marginally better on 5K2K. Going from a high quality suw OLED to a high quality 5k2k OLED isn't that noticeable. I think alot of people who are blown away by 4K are also getting their first good OLED. That is the bigger wow.



The issue with the LG 39 is the monitor size. It is around 15% smaller screen area than the G9. Pushed back to the same distance it is not immersive because you lose the sides. Pulled closer, its uncomfortable for gaming, it still isnt as immersive, and the extra height doesnt do anything for me.

I got this primarily for productivity improvements, but 21:9 5K2K doesn't do the same psychological trick as 32:9 1440p in games. May end up keeping it. I will give it another try tomorrow.

If someone made a 32:9 oled 4K, I would get that and upscale the shit out of it.
 
AMD NR using optiscaler. Can run DLSS on AMD for games that don't have native support for FSR built in. Do not use it for multiplayer games as it be detected as a cheat and result in a ban from the game.
 
I'm sure the image can be marginally better on 5K2K. Going from a high quality suw OLED to a high quality 5k2k OLED isn't that noticeable. I think alot of people who are blown away by 4K are also getting their first good OLED. That is the bigger wow.



The issue with the LG 39 is the monitor size. It is around 15% smaller screen area than the G9. Pushed back to the same distance it is not immersive because you lose the sides. Pulled closer, its uncomfortable for gaming, it still isnt as immersive, and the extra height doesnt do anything for me.

I got this primarily for productivity improvements, but 21:9 5K2K doesn't do the same psychological trick as 32:9 1440p in games. May end up keeping it. I will give it another try tomorrow.

If someone made a 32:9 oled 4K, I would get that and upscale the shit out of it.
I think some of it depends on what you like. I find the super ultrawides too wide, and I don't like the distortion you get at the edges. An ultrawide I can do, and I used to have, but a regular widescreen also works good for me.

There's no right answer, all in what you like.
 
I think some of it depends on what you like. I find the super ultrawides too wide, and I don't like the distortion you get at the edges. An ultrawide I can do, and I used to have, but a regular widescreen also works good for me.

There's no right answer, all in what you like.
There isn't any distortion with oled wide viewing angle.

For productivity, you can have a large center window and two large sides. Afaict, the best way to work on a 5k2k is to split the screen in half, one large app on the left, and two on the right. If im working I prefer my primary window centered.

32:9 is the best for productivity, and most immersive for first/ third person games. Unfortunately they are currently all 1440p with exception of latest G9. They dont benefit as much from upscaling.

So its a tradeoff between goated aspect ratio and graphical fidelity.

If someone has a mid tier card that is capable of 4k with upscaling, I would 100% recommend a G9 instead of a 4k. Before upscaling you needed a flagship card.
 
Back
Top