Recent content by zrabbit

Yeah but they want me to pay for the shipping there AND the shipping back.. Who does that?? I really don't think there's anything wrong with the card but I guess I'll send it back

For the record, I did try another DVI cable, and I did try the newest CCC and I did try both ports on the card

I said in my post that I have a 3870 card in the machine and it works fine in 2560x1600 which means the cable is fine. I bought a 4870x2 card and put it in to replace the 3870 and it WILL NOT go above 1280x800.. I have posted on other forums including the AMD ones, I have opened a ticket with...

I have a 30" screen, and 4870x2 card and the resolution is stuck at 1280x800. I've tried everything I can possibly think of including using powerstrip to force the resolution. I put a 3870 card in the same machine and same monitor and it works fine at 2560x1600. I went through every option in...

Dizzy I got a question for you what hard drive are you using, and what controller is it plugged into and what mode is the controller in (AHCI/RAID, etc)

Lol.. I just posted a message exactly like this the other day.. At high FSB i can run orthos/OCCT etc all day all night but i can't play 3d games at all. However this happens at 500 FSB on mine and not 400.. It runs 450FSB no problem and 3d games work no problem.. When I say it runs...

Can't believe I'm the only one that has had problems with the 3d card at high FSB when everything else works fine :P

I have T120 on E8400 and the temps are always around 60C or higher at 1.31v or higher 3.8ghz+ .. and the two cores are about 5-9C apart in temp.. I think it just doesn't have that good of a connection to the CPU.. Next step is lapping it and I'd like to lap the cpu too but that will kill the...

MB: ABIT IX38 CPU: E8400 VID: RADEON HD 3870 RAM: CORSAIR PC8500 1066mhz DDR2 Orthos stable 16+ hours at 500FSB * 8 and *7.5 but when I load up 3d games , and I tried different games, they crash fairly quickly. Has anyone else experienced this?? I tried many voltage settings.. It must...

My E8400 takes 0.0250 more volts after about 3 months of usage to reach the same Mhz.. It takes a little over 1.4125v to do 4050mhz (450*9) and that's just too hot.. it runs max temp about 31C to TJMAX which to me is too high.. should be closer to 40C distance to tjmax.. Room is kind of hot...