chx's idea did'nt ignore peripheral cooling. Just look at the tower cooler setup people do for their CPU cooling. Beefy CPU tower cooler with 120/140 mm fan(s) blowing air from front to back through the tower heatsink, and along the way it provides sufficient airflow for the VRM heatsink behind...
C7 is forced to be off-center to clear off the inner DIMM slot, forcing C7 to overlapp part of the chipset and the M.2 SSD. Have you confirmed that the C7 mounted onto a CPU on X99E-ITX/ac will clear the top of the chipset heatsink as well as the top of the M.2 SSD/screw?
I believe the center...
I don't think GALAX and Colorful are not affiliated and don't OEM each other. "Galax GeForce GTX 1080 iGame" in that wccftech article probably is a typo and it should be Colorful iGame X-TOP, whereas 1080 HOF is strictly GALAX. Speaking of GALAX there is another non-reference GTX1080 by GALAX...
The riser used the way Findecanor does serve the purpose of allowing the GPU and PSU to not block each other's fan intake, the PSU fan facing left, the GPU fan facing right. Of course you can move the PSU in Necere's render to the top of case to achieve that goal without a riser, but Findecanor...
That's a re-branded E-D5S by the Chinese company Realan:
E-D5S - Mini PC|Barebone|Mini case|Mini-ITX Case|Aluminum Case|ITX Case|HTPC Case|Mainboard|Power Adapter
With a minor change (front I/O location) Sharkoon sells it under the name CA-M:
Sharkoon - CA-M...
Sorry I haven't caught up with the thread so I'm going back to refer to Necere's post from a week ago:
There were such cases 10 years ago though it's not so SFF, was quite popular in my country where they were sold:
(the second case is a special edition of the first allowing an ATX/SFX PSU...
Comparing the layout of ATX and mATX X99 boards I see there's larger power regulation section located north of CPU socket on most of the ATX boards vs to the side of DIMM slots on mATX, the latter prohibiting 4 additional DIMM slots. Looking at how ASRock managed to cram everything on their...
Ah, I see.
Hmm. The reason I asked this is because I was thinking the front logo orientation issue could be solved by providing a stand for horizontal placement as well instead of the typical four corner feet with the same aesthetic (a rectangular face right underneath and flush with the...
Looking at Fatal1ty Z170 Gaming ITX/ac I see MegaChips MCDP2800 right behind the top HDMI port, the same DP1.2-to-HDMI2.0a bridge chip that's on Gigabyte Z170X Gaming G1 and ASUS Z170 Deluxe. ASRock's already providing the necessary HDMI firmware update on their site noting that the latest Intel...
I'm looking at the photos and can't figure out precisely which part of the chassis is steel. Are those long narrow strips going from front to back (but not all the way) that the filter sheets are attached onto made of steel and just screwed to the aluminum chassis?
Also, why is the ID plate...
To the best of my knowledge, the distance from the center of the CPU socket to the nearest DIMM socket wall is approx. 41~42mm for X99E-ITX/ac and 44~45mm for EPC612D4I,
so I don't think you can install Cryorig C7, Thermolab LP53, Silverstone AR-05, or Noctua N9i/N9a (or any other heatsinks that...