Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
That did the trick! I set 16bit/48khz in both the speaker and spdif areas (speakers alone didn't work), then restart my computer (crackling didnt go away immediately after changing the settings), but it works perfectly now. Thanks.
Thanks, that was very helpful.
So an update... my headphones seem to work smashingly, even while the buzz-popping continues on my 5.1... which is interesting. At the moment, I'm using optical out to a home theatre grade Sony receiver. I've ruled out the decoder since everything else I plug...
I've found other stuff online related to Preludes crackling/popping, and the one major piece of advice seems to be to increase PCI latency in BIOS... so I did.
First, I raised it from 32 to 64 and noticed a definite improvement but the cracking was still noticeable, if faint (I should add...
I don't see how it could be a hardware issue since it's peachy keen in one OS but not in another. It's got to be either a driver problem or a setting somewhere. I wouldn't even bother booting into XP if GameFly or PeerGuardian worked in Vista64, but since they don't I have to switch off...
I have a similar problem except the crackling is only in XP and only on the two right speakers in my 5.1 Setup (connected via optical out to decoder). There are no problems at all in Vista x64 (running dual boot), only XP and only when using my 5.1 speakers. The problem persists if different...
Thanks! I found the IFX-14 at Petra's Tech Shop, although it looks like they're oos atm. I'll also order a handful of fans for the case and the CPU. ;)
Edit: Looks like the IFX-14 will be way too big for the case. I'll have the find something a little shorter (140mm or less).
This morning I tried to update the drivers for my X1950, but when the official Catalyst 8.2 drivers started to install, I got a a message saying "This display driver is not compatible with the display adapter(s) installed in your system."
Uh, what? So I figured I'd just do it the right way...