Recent content by vdubbia

  1. V

    Assistance needed with new build

    well, I'm back in business. Reset the DDR2 to 1.95v and that gets me a quick boot. How do I know if this voltage is optimum? My ram is rated 1.8-2.0v. Should I be happy as long as its stable and not burning up?
  2. V

    Assistance needed with new build

    Ok... new issue. During my BIOS setup I changed my DDR2 voltage from 1.8 to 1.95. Vista booted, life was grand, I was able to do some benchmarking, etc. Played around with Vista for a good hour or so, downloaded the 32 updates I needed and installed, etc. System rebooted, etc. and all...
  3. V

    Assistance needed with new build

    The reason I was getting the black screen was because I set my Init display to PCI vs. PCIe. Once I did that I was good to go. I do think that the SATA connection was loose, too. Thanks for the help... things seem to be moving along nicely at this point.
  4. V

    Assistance needed with new build

    Progress! I changed a SATA port and re-seated the SATA power cable and I got all the way through the 'loading files' screen and am now looking at an install screen... will keep you posted. THANKS!
  5. V

    Assistance needed with new build

    HDD is: Seagate: HD 320G|ST 7K 16M SATA2 ST3320620AS
  6. V

    Assistance needed with new build

    when I hit F1 to bypass BIOS set up, I get a white bar on the bottom of the screen that says 'Windows is loading files' but it stops at about 1/8 of the way across and just sits.
  7. V

    Assistance needed with new build

    RAM is rated 1.8-2.0
  8. V

    Assistance needed with new build

    Abit IP35E e6750 w/ stock sink G.Skill 4x1GB DDR 800 OEM Vista x64 Earthwatts 500w 8800GTS 320 I built system and successfully posted, but I can't seem to get to the point where I can actually install the OS. When I save my BIOS settings, I just get to a black screen with no prompts...
  9. V

    How difficult is it to install OEM version of Vista?

    So what's the preinstallation kit for? This is OEM and not a retail box. This my first attempt at a build and just don't want to waste the $100 bucks I spent for OEM if I should buy retail and save a headache. If it's plug and play without the OPK, then I should be all set?
  10. V

    How difficult is it to install OEM version of Vista?

    I bought an OEM version of Vista thinking it would be a straight install. Got the package today and there is something about a Preinstallation Kit. Can I just install this out of the box, or do I need to do some sort of registration as a system builder with MS?
  11. V

    Getting ready to push the power button on my new build...

    Thanks Mark. I'll report my results later tonight when I get home from work.
  12. V

    Thermal paste question...

    I only had the heatsink on for about 24 hours and the cpu was never turned on (this is a new build). I just wanted to double check the CPU and had to take the heatsink off. There was good coverage on both the CPU and the heatsink so I figured all was good.
  13. V

    Getting ready to push the power button on my new build...

    What about the current black screen I have. Is it just waiting for me to run the OS intaller at this point or is something hanging? I'd expect to see some sort of prompt, but I don't.
  14. V

    Thermal paste question...

    I recently removed a newly installed e6750 stock heatsink fan. I then re-installed it. Should I have cleaned and applied new thermal paste? I figured the existing smear would be adequate.
  15. V

    Getting ready to push the power button on my new build...

    hey that linux live looks cool. boots right from USB? Might have to check that out. So am I good with my current black screen? I'm going to have to reset the CMOS tonight because I just realized I made my DVD drive the 2nd boot up drive when it should be first.
Back
Top