• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by sioc

  1. S

    Successful Overcloock?xp-m 2500

    HI!! New experimentetions new questions... Cerrect me if i'm wrong! The most important in a system is the bandwith, the data speed between memory and cpu. So i tested the two config with SANDRA and ran the BANDWITH test. 11X225 for 2480MHZ CPU speed and 3467 Mb transfer 12X222...
  2. S

    Successful Overcloock?xp-m 2500

    MAXXO!! Running with a ratio of 5:4 ?? I don't understand! 5 for?? and 4 for?? I nedd to read about it!! If you can explain to me i'll do it!! OK! If i understand well it means to run FSB/MEMORY asynchrounisly? According to that article it is dangerous to run it on NVIDIA chipset and not...
  3. S

    Successful Overcloock?xp-m 2500

    Something is stopping me. I'm not sure if it's my RAM or my MB!
  4. S

    Successful Overcloock?xp-m 2500

    HI! I'm running 11X222 - 445Mhz FSB -1.7V core 2.8V Vdimm 1.7V chipset and 11-2-2-2.5 timing. It seems stable... Seems because i'm unable to get work PROMETEST 95!! I open the PROG ans get unable to connect to server! Stable, because i can play my games; SPLINTERCELL, CALL of DUTY and...
  5. S

    Successful Overcloock?xp-m 2500

    NICE OVERCLOK?? NOT SURE... I have to change parameters to get stable; i can't play ususal games! So, i'm reading now about timing and OC stuff. NOW! i'm running 11X210 - 2-2-2-11 1.6V core 2.6V vdimm and 33 degree CPU! I will test it and will try to get FASTER. I will try combinations...
  6. S

    SLK-948U install, how tight is tight enough

    HI! As other say, you thight the screws in an X shape. You could put cheap thermal paste onto the cpu, put your heatsink and thight the screws. After you unscrew it and check the mark on your heatsink. That way you'll know better wich screws have to be thighten more!
  7. S

    Successful Overcloock?xp-m 2500

    Awdark! My pc is my pc!! I don't want to beat anyone butmy goal is to take benefit and help from experience overclockers and i would be happy to get a reasonable overclock CPU like anyone else. It's my first experience. The voltage setting i get in the BIOS is 2.7 2.8 2.9 and 3Volts. The...
  8. S

    Successful Overcloock?xp-m 2500

    Yes!! It's 1:1!! Increase DDR voltage?? Now it's 2.7 volts!! Is it dangerous?
  9. S

    Successful Overcloock?xp-m 2500

    HEY GUYS!!! You haven't answer my question!!! WICH SOFTWARE or TEST SHOULD I DO TO CHECK STABILITY of the SYSTEM?? I observed BAD BEHAVIOR from my PC!! I can't play game!! THE GAMES FREEZE!! So, i have settings to do but WICH ONES?? Tank you
  10. S

    Successful Overcloock?xp-m 2500

    oups!!!! I made the change! lol! LOOK UP!! Tanks HEY!! How do i do to put the image from CPU-Z into that post???
  11. S

    Successful Overcloock?xp-m 2500

    HI!!! I overclocked my CPU!! Here is my config: AMD XP Mobile 2500 (1867 Mhz) Termaltake Pure Power 420W SLK 97 Heatsink ABIT NF7-S rev.2 OCZ PLatinum EL PC 3500 2X256 OVERCLOCKING 12X210 2525Mhz FSB 420Mhz CPU temp: 36 celcius Case temp: 24 Vcore: 1.675V Vdimm: 2.7V Timing...
  12. S

    sendblast NF7-S rev 2 Nrthbridge HELP PLEASE

    HI!! You're wright!! The northbridge is square!! As i said, i don't find copper on the whole surface!! I'm seeing only a little square. Not a whole square but the outline of a square!! It look like trace !! OUCH!! The circuit itself!! I stoped to senblast it !! I can't try it to see if it...
  13. S

    sendblast NF7-S rev 2 Nrthbridge HELP PLEASE

    HI! I started to sendblast my northbridge and wonder if i'm not destroying it????? I get a NF7-S rev 2 MB. I hoped to see cooper and i'm seeing a square form!!! In the center of the northbridge i see square lines drawing??? Do i need to continu the sendblast or i HAVE DESTROYED my...
See more
Back
Top