Recent content by rma

That is the same conclusion i have at the moment, the biggest problem is that i need to invent all the items that i need for the job, so im currently 3D modelling the diffrent parts so i can 3D print them, and from there on i need to test the solution.

That could be pretty interesting to do, maybe use an car/motor cycle cooler.

Not that worried about the humidity, the humidity i can control even an rainy day, just an matter of controlling what i put in the room and how much, i can do that with an micro controller and some logic, you actually want more then 30%RH humidity, and below 60%RH going below 30% would make the...

Hi Spartacus09, As i live in Denmark, most of the year we have pretty low temperatures outside, both Apple and Google are building data centers here because of the possibility to use free cooling, besides that the power here is pretty expensive (50cent pr kWH) so using AC would just make the...

Hi All, preface: I have all my server gear and network placed in my house in an around 1.8m2 (~20sqft) room, district heating enters the same room and therefor adds more heat in the winter time but more or less no heat in the summer as we dont have the heating turned on beside heating water...

looks nice, you need to get the cleaing lady to do some cleaning for all the dust :) I would have loved to have my 42U rack mounted that way, with an backdoor on it and only the front facing out.

Ahh me reading to fast here :( would recomend Fluke to but thats out of the price range. Personally i use the Fluke Linksprinter 300 for most work, it's handy and covers most work, but does not provide any load for the POE part other than that https://www.pockethernet.com/ should be an pretty...

first question would properly be what is the budget?

otherwise i would highly recommend http:///www.scenesat.com

Thanks, i have access to J5005 NUC systems and i even think that i can get hold of an J4105 based system to, my normal EXSI environment consist of 4 older DL380G6 and G7 systems, they do the job when i do testing, but the kWH prices in Denmark are around 33cent/kWH thus leaving them on is not an...

i think the HP Elitedesk 800 G2 mini would be over the normal power budget i would like to hit. I would really like to use more or less the same power as the RPi's (when the machine Idles) thus idle power should be around 5-6watts that would be around the same wattage as the, intel J5005 CPU.

Never had an SD card fail, i have good experience with cards from SanDisk.

Thanks for the input, as all machines will be running very light do you think it would be possible to use the intel NUC NUC7PJYH, it would really fit perfectly in with regards to the low power usage.

Hi All, As the years have past i been using RPi's for different small tasks, and they are doing great, but some applications like Unifi requires more and more ram and faster CPU's, therefor i was considering using an low power Intel NUC or Gigabyte Brix to consolidate all the RPi into...

Hi Been looking around for an solution to take an E1/T1 line and convert each timeslot to an RTP stream (ITU-T G.711 PCM A-Law audio 64 kbit/s PCMA). thus I would like to define that time sloth 2 should be RTP streamed to ip address 172.18.1.2 and timesloth 3 to 172.18.1.3 etc. it should...