Recent content by Relentless702

Yeah I also was ruling out the possibility of one of my other components being defective which was more of a concern to me then the ram. Shipped it today priority so it should be there tues. I've never RMA'd anything from newegg, they pretty quick on shipping back a replacement?

Well I'll ship it out tomorrow, hopefully the new pair wont have any errors. Thanks all for the advice.

Well I ran four passes on each stick individually at 1.9v. The one stick had no errors, and the other had one error on the third pass test three. I switched the stick with the errors to a different dimm (the same slot as the first stick with no errors) and ran another four passes to rule out the...

I removed one stick and ran 3 passes on the individual at 1.9v with no errors. I dont have time to swap sticks but i'll do the same on the other stick after work tomorrow. If I get errors on the other stick then im guessing its faulty and i'll have to RMA them, but i'll bump the MCH up a bit...

Tested at 1.9v. Same error on pass 3 test 4. Im going to re-run the test on each stick individually at 1.9v for the same amount of passes. Really hoping its not an issue with one of my other components.

Thanks for your response, I'll give that a try and post the results.

Mobo - GA-EP43 http://www.newegg.com/Product/Product.aspx?Item=N82E16813128347&Tpk=ga-ep43-ds3l Proc - Q6600 @ stock RAM - G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 800 http://www.newegg.com/Product/Product.aspx?Item=N82E16820231122 Everything is stock, bios settings are default. Overall the...

Problem solved, disregard.

Well my new build is up and running, and before I do anything else I'd like to set up xpress recovery. The problem is, when I try to create the backup, im getting an error 403 message saying I dont have enough unallocated hard disk space. I've checked the disk management and don't have any...

Yeah I looked into the E8400, but I'm building this rig to last some time so I went with the Q6600. Everything is ordered, waiting on shipping. Thanks for your replies.

Yeah for sure man, thanks for the input.

Yeah that makes sense, waaaay to impatient right now to do that lol. Just itching to build this, will be a beast compared to what im running now.

Thanks for the reply. I do like the RC-690 and buying from Provantage will save me about 15 bucks, better then nothing haha. I have only ordered from Newegg before, how fast is shipping from buy.com and provantage? Regarding the BFG Tech LS-680, think the cables are long enough to route...

First off, as a new member I would just like to greet the [H] community, hope everyones holidays went well. The build im using currently I built five years ago and im extremely overdue for a new one, but only up until about a month ago I've been put into a position to be able to do it. On...