• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by RandomUserAZ

  1. R

    ASUS 5850 - Can't adjust voltage in MSI Afterburner

    After extensive Google searches, I finally found the solution. In addition to the above, you must add the following to the .cfg file in the profile directory. VDDC_uP6208_Detection = 46H I once again have access to adjust my Core Voltage! I am curious to know what other ASUS owners...
  2. R

    ASUS 5850 - Can't adjust voltage in MSI Afterburner

    Bumping an old post because the problem has returned. I recently reinstalled Windows 7/64 on a new drive and downloaded the latest version of Afterburner (2.1.0) I did the same fixes I did before (changed UnofficialOverclock to 1 and adding the uP6208_Detection = 1) but I am unable to...
  3. R

    Drive score seems low, help?

    Oops, I typed before I thought clearly. I have mine on the Marvell controller as well. The Intel drivers will help your other drives, not these. On my board, the Marvell RAID setup is outside of the bios (hit ^M during boot I think), but you've already set it up. Did you use the default...
  4. R

    Drive score seems low, help?

    I have the 1T version of those drives set up in RAID0 and I get around 265M sequential reads and 220M sequential writes, so something is up (am assuming they'd be comparable) Do you have the latest ICH10R drivers...
  5. R

    External drive not working properly with eSata

    I just recently bought an external drive for backups and wanted eSata for the speed. The drive is the Fantom GreenDrive Pro 2TB USB 2.0 / eSATA External Hard Drive GDP2000EU. I'm having problems getting it working correctly, though. This is my first eSata device so I'm wondering if there is...
  6. R

    ASUS 5850 Stable in GPUTool but not WEI test?

    I've been using GPUTool to test my overclock and came up with good settings for a moderate overclock. (1.28V, 900 core, 1165 memory; GPU at 75C, Fan at 50%). I tested it for 15 minutes in GPU tool with no mismatched pixels so I assumed it was good to go. When I ran the WEI test, however, out...
  7. R

    ASUS 5850 - Can't adjust voltage in MSI Afterburner

    I can confirm that this works, but it still needs some adjustments. While you can change the voltage, you can only change it by +100mv (the bar goes from -100 to +100, it doesn't allow you to set a specific voltage, only a relative one from the 1.181 base). That means you are limited to 1.281...
  8. R

    PCI-E plugs on PSU

    A 5850 might be to much for a 450W with all those devices, but Corsair makes great PSUs and might be OK. I'd try with a power splitter first, though, as they are cheap. http://www.newegg.com/Product/Product.aspx?Item=N82E16812198016
  9. R

    ASUS 5850 - Can't adjust voltage in MSI Afterburner

    It is the newer CU version if it matters: ASUS EAH5850 DirectCU TOP/2DIS/1GD5 Radeon HD 5850 (Cypress Pro) I've tried the suggested fixes. I ticked the boxes in settings to allow/monitor voltage control. I edited the cfg file to change EnableUnofficialOverclocking from 0 to 1. I...
  10. R

    Antec TruePower Trio 550W vs OCZ ModXStream Pro 700W

    I'm building a new i7-930 based computer and had been intending to use an older Antec TP Trio 550W that I had sitting around (was an RMA replacement that I received 3 years ago). While it is probably strong enough for what I currently plan to put in the system (details below), I was concerned...
See more
Back
Top