Recent content by norgos

I'm using Ripjaw's F3-12800CL9D-4GBRL - http://www.gskill.com/products.php?index=222 The motherboard I'm using is not listed under its "Qualified Motherboards List" on G.Skill's website, but on Gigabyte's website, this particular RAM is compatible. Mobo is GIGABYTE GA-P55M-UD2 -...

update : - memtest ran fine - all speeds are properly set in BIOS for ram and CPU ======================= freeze ups still occur I tried to run the computer by removing one memory stick and only leaving one 2gb ram to test each ram individually. however, when I power up my pc w/ only 1...

I'd just like to add this.... Whenever my computer locks up, here's what observed.... The lights that are usually solid on my mobo where the ethernet port is, goes off. could this be a power supply issue?

I haven't tried running at lower memory speeds. I just did a memtest for two hours ; ran fine with no errors... if i looked at gigabyte's website for supported memory under that mobo, the ripjaws ram is actually listed as supported. checked by bios and it running at around 1.5v

yup, i'm at stock cpu....i don;t oc, and it happens randomly even while i just surf the web [no gaming, etc].

I'm using these... Ripjaw's F3-12800CL9D-4GBRL - http://www.gskill.com/products.php?index=222 The motherboard I'm using is not listed under its "Qualified Motherboards List". Mobo is GIGABYTE GA-P55M-UD2 -...

keep us updated. I seriously hope it's not my motherboard or CPU :(

So yeah, after disabling that, nothing has changed :'(

^^^^^^^^^^^^^^^^^^ I have the EXACT SAME PROBLEM! Especially with the audio bit repeating itself and distorted. I can't move my mouse, type anything or whatever. The image is completely frozen, my fan is stilling spinning normally and I'd have to do a hard restart. I checked my eventvwr and...

wow, newegg.ca shipping is crazy fast. will be taking pics of the setup once i get it.

damn, i ordered the setup already, haha. oh well.

I chose the 9500 GT because it's sufficient enough for the gaming that I do [i was watching some videos of devil may cry 4 running on youtube and it runs fine enough for my needs... I plan on getting a high end card in a few months, so no point aiming high and might as well save 100$ for now...

alright, updated some specs based on your suggestions. not much changes but every corner helps. Changes: - Changed the HDD from green to black - changed 750w psu to 550w psu - GPU ....changed GTS 250 to 9500 GT I figured that going for the higher end GPU was a bit ovekill for what I...

I could go on and on onhow much I can multitask :P The majority will be used for heavy simulation of automation software and such. I'll be having multiple instances of program running. However...NO overclocking,....at all. This build seems good enough, but I won't be doing overkill on it...

Heya, I took your build and did a few adjustments. I ended up taking the microATX...it'd make a nice small gaming rig sometime in the future... It ended up almost 300$ over my budget, but wtv ;) It'll be a system that I'm looking to keep for awhile and I'm not that much of an FPS guy, so I...