Recent content by Nolhian

CPU : Athlon X4 645 RAM : I must check but either 1333Mhz or 1600Mhz Drives are hooked up to a LSI 1068E board on PCI-E 16x port. Yes D-Link is regular PCI. I think you're right but when I make a file locally on the Raidz2 I get more than 300MB/s so more than a Gigabit cable can handle. Well...

Thanks for your fast answers ! On the Client : Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) On the NAS : D-Link DGE-528T I just did a test the other way around, NFS from NAS to CLient : 68MB/s , CIFS still 35MB/s.

Hello, I have a raidz2 pool with 6 drives Samsung F2 ecogreen 1.5to on Nexenta Core with 8Go ECC Ram. time sh -c "dd if=/dev/zero of=ddfile bs=8k count=2000000 && sync" on the pool reports 310mo/s. iperf between the NAS and my pc reports 500mbits/s in a way and 630mbits/s in the other...

Nobody on how to disable disk spin down ? ;(

Hello ! :) I wonder, is disk spin down disabled by default in Nexenta Core 3.0.1 ? In`/etc/power.conf` by default I have: If i read correctly the power.conf man : This means that if there is not a system-threshold line in `/etc/power.conf` ( as in mine previously quoted ) that the...

I guess i won't have anything else on PCI. Thanks a lot for all these infos ! ;)

I think you're right Jesse B, that's what the download section on Asus website shows. Well if it doesn't work, could i just add something like that http://cgi.ebay.co.uk/Intel-Pro-1000MT-Gigabit-Desktop-PCI-Network-Card-UKSHI-/260753638961?pt=UK_Computing_NetworkCards_RL&hash=item3cb620c631 ?

wow that was fast :) @s0rce : I didn't find anything on the NIC either. @Gigas-VII : Actually i think s0rce said the CPU was fine, but yes it's low end, on a par with Pentium E6500 or Core 2 duo 7400. My goal is just to have an opensolaris/Nexenta system with one raidz pool ( 10 to of data) to...

Hello, Still trying to figure out the way to go with raidz. I'll have 10x Samsung F2E 1.5to. First one would be a pool with a unique 10 drives raidz3 vdev. I could go with 2 vdev in the pool, a 6xraidz2 + 4xraidz1 or 7xraidz2 + 3xraidz1 but to me that seems to be less secure. I need minimum...

Hello, I'm trying to build a cheap ZFS server. AMD seems the way to go with ECC support since Intel require expensive server motherboards. So far I'm there : MB : ASUS M4A78LT-M LE ( 6 SATA ) => 42€ / 60$ CPU : Athlon II X2 250 => 40€ / 57$ RAM : 2x2go Crucial ECC unbuffered (...

Hey ! Sorry I'm late, been without internet for a couple of days. Thanks. Let's say i have 8 disks, what would be the advantage if i go with two 4 disks raidz vdev vs 8 disks raidz2 ? I guess that takes less time to resilver when a disk needs to be replaced but is that all ? Thanks ! I...

Hello ! I am new to the ZFS world and I've decided to make a file server under Nexenta Core. config : µATX H61 or H67 motherboard Core i3 2100 8go Ram LSI 1068e based controller ( probably a br10i ) 8 to 10 samsung F2 ecogreen 1.5to I've got a few questions though : 1) Would the br10i work...