• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by nikolasmor

  1. N

    DFI NF4 Ultra-D 1 LED..Won't Post

    Went to turn my PC on this morning and the monitor stayed blank and then went into power saver mode....hmmmm rebooted, nothing. So tonight I popped the cover off of the case and checked the 4 led status. Powered it on 1, 2, 3, then 4 LEDS, back to 3, 4, 3, 4, 3, 4, 3, 4, 3, 4, 3 stayed at 3...
  2. N

    Aerocool ExtremeEngine 3T + Ninja = NO GO??

  3. N

    Quick Question about sleep/Hibernate mode XP

    I've got Windows XP Home. Ever since I've built the system I hit the "moon" sleep button on the keyboard and everything shuts down saving what I'm in the middle of and holding my place till I get back without burning up so much electricity. Then last week It has says its going to sleep and the...
  4. N

    Opteron 165 is not my friend

    I was running 44 at 1.4 and now am at 47-48 at 1.5 under full load dual prime.. 6 1/2 hours into priming at that
  5. N

    O/C results 165 0610...need thoughts opinions

    The MOBO max is 370 The CPU max is 2900 Ram doesn't like to be overclocked too much. I'm priming it right now and am about 6 hours into it at 322.4 * 9 = 2901.8 Ram is at 263.7 This is about as high as I geel I need/want to take it. I'll let it run through the night to make sure. Temps...
  6. N

    Opteron 165 is not my friend

    Nawwwwwwwww I'm running 1.525
  7. N

    O/C results 165 0610...need thoughts opinions

    Cool. I'm not sure what the problem is now! Here's my breakdown Dual Prime Stable at: 5x 370 1:2 divider So max board is 370 9x320.9 1:2 divider So max CPU is 2888 So I'm trying to run 310 * 9= 2790 5:6 divider outs my ram @ 254 Yet it will not prime for more than a few...
  8. N

    O/C results 165 0610...need thoughts opinions

    320*9 ran stable forever. 322 x 9 failed 1 core after 5 hours! However my temps never went above mid/low 40's. Voltage is at 1.50 in the bios. Think I should push the volts higher or will it even respond much to it at that level!!!!!!
  9. N

    Opteron 165 is not my friend

    I don't think .02 is anything to worry about. Think of it like you would your car. When you turn up the radio your volts are gonna fluctuate a little. Nothing abnormal
  10. N

    Opteron 165 is not my friend

    If your motherboard has a four pin +12volt connector seperate from the normal power connector, then yes it pulls form the +12volt rail. If not, it probably pulls from the +3.3 or +5volt rails. The actual motherboard's power circuitry though is what determines the power stability to the...
  11. N

    Opteron 165 is not my friend

    http://www.dfi-street.com/forum/showthread.php?t=16446&highlight=instances+prime95
  12. N

    O/C results 165 0610...need thoughts opinions

    Okaaaaaaaaaaaaaay(from the Dave Chapelle skit) LOL. I just think its weird how it was far enough in to get an OC as high as it did yet just far enough out to throw it out of whack. Core 0 failed at 325 X 9 while core 1 ran all night at the same. Gonna lower it down to 320 and retest while I'm...
  13. N

    O/C results 165 0610...need thoughts opinions

    I pulled the HS off today(and then dropped the ninja on the MOBO...ooops) to check and it is indeed a CCBBE 0610. Then I noticed that the ram closest to the CPU was 99% in, I pushed it down about .5mm and it snapped in. cloeaned and recoated with AS5..installed and rebooted at 5X cpu mutli 2X...
  14. N

    O/C results 165 0610...need thoughts opinions

    Running at 2700 with a 5:6 divider. Gonna prime this and if it's stable call it done!!! Unless anyone has anything else to add....... thanks everyone so far
  15. N

    O/C results 165 0610...need thoughts opinions

    ok, ptime is stable overnight at 290 with a 5:6 divider. This put the ram at 247 though. I'll play with it after work tonight. Any other ideas. what about moving the SATA off of 1... thanks
See more
Back
Top