Recent content by neotekz

  1. N

    is my voltage too high?

    i went ahead a up my voltage to 1.62 in the bios and cpuz is saying im running at 1.65v...but the strange thing is that when i set the voltage to 1.6v(bios) i get 1.57v. i just saw a setting in bios to help correct for vdroop so my voltage is staying pretty close to to what i set it in bios for...
  2. N

    is my voltage too high?

    i keep on hearing that a lot of ppl run their q6600 around 1.6v too, what are acceptable temps with that voltage?
  3. N

    is my voltage too high?

    at idle it goes to 1.4-1.42v. is it common to have a difference of 0.1v? just seems a little high to me. so can i up the volts as long as my temps are in check or does it get to a point where the voltage will damage my cpu regardless of temp?
  4. N

    is my voltage too high?

    so the 1.44v is the one that i should believe?
  5. N

    is my voltage too high?

    this is my first overclocking attempt in over a decade, although im not a complete newb im still pretty rusty on some of the finer details. here's my setup q6600 cooled by swiftech mrc320 and apogee drive, gigabyte GA-EP45-UD3P, diamond 4870, and ocz pc-8500 all in an antec 900. after playing...
  6. N

    esata HD as main drive

    the front of the case can take 3X120 and each 120mm fan takes up 3 slots. you can also put the fan in front of slots with hard drives.
  7. N

    esata HD as main drive

    im using the antec 900 and using a swiftech rad that takes up 8 of my 9 bays, so i can either put a HD or dvd-rom in that remaining bay. im even thinking of not using that bay at all and just have both external HD and dvd rom. will the motherboard recognize both external HD and DVD rom...
  8. N

    esata HD as main drive

    im thinking of getting either the seagate freeagent pro or xtreme and using it as my main drive for my new build. will these drives be fast enough for gaming?
Back
Top