• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Nadfink

  1. N

    MSI 570 or 580 PSU

    Thanks for the reply... Enough even when oc'd along with an oc'd CPU? If so then I guess that settles it ...MSI 580 Lightning it is. Really didn't want to risk spending so much on a GPU only for my PSU to struggle.
  2. N

    MSI 570 or 580 PSU

    Hi, Am getting close to pulling the trigger for a new GPU. Narrowed it down to either the MSI 570 Twin Frozr III or the 580 Lightning. Currently only gaming at 1080 so I realise its overkill for now, but a new monitor is next on the list... Anyway, my concern is my PSU. Antec Tp - 650...
  3. N

    Aero input lag with Sandy Bridge?

    I have the lag issue Blahman. Have you managed to fix it? Thought it was my new Roccat mouse at first, but have the same issue with other mice. Tested with everything set at default - still happens. It's intermittant though, which makes it more annoying. I'm hoping my new REV3 board will fix...
  4. N

    Official ASUS P8P67 Series Overclocking Guide and Information

    Guys, can you give me some advise please I have my 2600k running real smooth with 1305 now. Thought it was time to start the OC...my settings are: BCLK Frequency- 100.0 Ratio- 47 EPU Power saving- Disabled Speedstep- Disabled Turbo Mode- Enabled Load-line calibration- Extreme Phase Control-...
  5. N

    Official ASUS SSD – P8P67 Series Validation and Support – Including SATA6G SSD

    Forgive me if this is a massively noobie question but... Having recently flashed to 1305, I have everything running stable at defaults... All the issues I had with 1204 appear to have been resolved. Before I started tweaking, I made sure that all of the tips on these threads were followed. The...
  6. N

    P8P67 PRO - Hangs at shutdown, black screen - help!!

    I'm seriously hoping it's not a bad flash. Despite the long boot & the shutdown hang, everythings running stable at defaults. Q-Code sits at AA, which is what its been since 1053. Have just updated RST to 10.1 to see if that helped, first shutdown attempt worked!, but the next 3 attempts - no...
  7. N

    P8P67 PRO - Hangs at shutdown, black screen - help!!

    Hi, Thanks for the tip, have tried what you suggested but no luck unfortunately. My HDD's are both connected to the Intel 1&2 6g ports. ODD on intel port - 6. Tried with only the boot drive connected - still hangs. It's happening every time now, no longer intermittant. Just had a look at...
  8. N

    P8P67 PRO - Hangs at shutdown, black screen - help!!

    I'm having this problem too. When running 1205, this happened every shutdown. Flashed to 1305 yesterday, seemed to be cured at first but just tried it again this morning & its back! Have set everything to default but still hangs. Boot times seem slower on 1305 too, to make matters worse!
  9. N

    SB Build Advice

    Hi all, First thread here! Need some advice on a few issues i'm having with this new build. I have endured all the issues most have had with these boards, however, luckily after flashing 1204, most of them appear to have been resolved! Couple of probs remain tho, can anyone help ...
See more
Back
Top