• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recent content by Mach1

  1. M

    Gigabyte DS3 Issue, Maybe?

    Maybe my MCH voltage is too low, in this(http://www.legionhardware.com/document.php?id=610&p=2) article they cranked it to +.4 which seems a bit high to me, what are all you DS3 owners pushing it up to?
  2. M

    Gigabyte DS3 Issue, Maybe?

    Yeah I hear ya on that, im on my second chip actually and they were both this poor, the thing that gets me is I pull my multiplier down to 6x and crank the FSB and the cpu is only at 2.4 Ghz and it wont post over 390mhz on the fsb, I didnt think the chip was limited by FSB just simply by the...
  3. M

    Gigabyte DS3 Issue, Maybe?

    Sorry I started the post with the thought to put all that info in then I had to go and pickup my boss, anyways its a DS3 v2 ,i've tried the A7,A9, A10 bios's, im using a 6 heatpipe cooler that I got from newegg, idle temps are low 20's load is high 50's voltage is around 1.45, anything less...
  4. M

    Gigabyte DS3 Issue, Maybe?

    I have a E4300 on a GB 965-DS3 board with Geil-DDR2 800 ram, first of all the chip has a pretty poor overclock of around 3Ghz (poor compared to everyone else's atleast) and to test the memory i set the multiplier to 6x and I cant even get the FSB above 390 which is hardly pushing the...
  5. M

    Who here is using more then 1.5Vcore to there C2D CPU everyday?

    I imagine this is unrelated but I was pushing my E4300 (smaller die) last night and I ran it at 1.525 and I was getting ~25C @ idle but 55-60C under load, the idle temps blew me away though. This is with a $20 heat pipe cooler from newegg.
  6. M

    E4300 on the 'Egg

    OEM :'(''''
  7. M

    E4300 on the 'Egg

    I just picked up a E4300 from Fry's for $170, not to shabby for a local buy.
See more
Back
Top