Hi,
So the dilemma is whether I should repair my 3.5 year old W520 Thinkpad or invest in a new laptop.
My current laptop has these specs:
2.2GHz Intel Core i7-2720QM Quad-Core
FHD Screen,
8G RAM
2GB NVIDIA Quadro 2000M Graphics,
128GB Samsung 820 SSD
500G 7200RPM secondary drive...
just wondering where people get their figures from ... i can imagine myself setting the vcore ridiculously high because i thought people were using figures in cpu-z rather than bios :)
okay so i have got it stable at 3.0ghz ... tried 3.2ghz and it will boot into windows and when i start prime95 it stopped one of the cores and froze on me, had to reset. So i upped the voltage to see if that would stablelise it. Ran prime95 again at a higher voltage and no cores fail but comp...
Sorry... do you mean setting the vcore in bios to 1.35 or what it is rated at in cpu-z ? Which is the one that people qoute when in the forums?
Im guessing that the one in cpu-z is with Vdroop but is this the figure people use when overclocking?
New to overclocking :confused:
Before i start this is my system
Antec 900
q6600 G0 Stepping
Gigabyte EP43-DS3L
Xigmatek HDT-s1283
Corsair XMS2 2x2GB
ATI HD 3850
Ive managed to overclock my cpu to boot to windows at 3.00ghz but one of the cores fails prime95's torture test after between 5-9 hours. Ive set all...
Hey Bill,
Its reassuring that someone has overclocked on this board. Is there any chance you could tell me which options to change and which ones to keep unchanged?
Here is my thread in the overclocking forum
http://hardforum.com/showthread.php?t=1333052
Ive posted the issues im...
hey all,
I wanna overclock my Gigabyte EP43-DS3L but dont really have a clue how to...
Ive read the guide on overclocking but need some specific advice for my board before im comfortable doing so.
Has anyone had experience with this board ?
hi all,
So ive successfully built my first pc. It was stressful and very satisfying, learning a lot of things along the way. So ive been looking at various guides and articles about overclocking to make the most out of my q6600.
This is my system:
Antec 900
q6600 G0 Stepping...
So if i dont plan on overclocking the ram and 800mhz is fine for the q6600 on air then shall i spend the extra on RAM?
Cheers for getting back to me...:D